lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <56145254.90405@gmail.com>
Date:	Tue, 6 Oct 2015 15:59:32 -0700
From:	Alexander Duyck <alexander.duyck@...il.com>
To:	Jarod Wilson <jarod@...hat.com>, linux-kernel@...r.kernel.org
Cc:	Mark Rustad <mark.d.rustad@...el.com>,
	Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
	intel-wired-lan@...ts.osuosl.org, netdev@...r.kernel.org
Subject: Re: [PATCH] igb: improve handling of disconnected adapters

On 10/06/2015 02:52 PM, Jarod Wilson wrote:
> Some pci changes upcoming in 4.3 seem to cause additional disconnects,
> which can happen at unfortuitous times for igb, leading to issues such as
> this:
>
> [  414.440115] igb 0000:15:00.0: enabling device (0000 -> 0002)
> [  414.474934] pps pps0: new PPS source ptp1
> [  414.474937] igb 0000:15:00.0: added PHC on eth0
> [  414.474938] igb 0000:15:00.0: Intel(R) Gigabit Ethernet Network Connection
> [  414.474940] igb 0000:15:00.0: eth0: (PCIe:2.5Gb/s:Width x1) e8:ea:6a:00:1b:2a
> [  414.475072] igb 0000:15:00.0: eth0: PBA No: 000200-000
> [  414.475073] igb 0000:15:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
> [  414.478453] igb 0000:15:00.0 enp21s0: renamed from eth0
> [  414.497747] IPv6: ADDRCONF(NETDEV_UP): enp21s0: link is not ready
> [  414.536745] igb 0000:15:00.0 enp21s0: PCIe link lost, device now detached
> [  414.854808] BUG: unable to handle kernel paging request at 0000000000003818
> [  414.854827] IP: [<ffffffffa0b95a9c>] igb_configure_tx_ring+0x14c/0x250 [igb]
> [  414.854846] PGD 0
> [  414.854849] Oops: 0002 [#1] SMP
> [  414.854856] Modules linked in: firewire_ohci firewire_core crc_itu_t igb dca ctr ccm arc4 iwlmvm mac80211 fuse xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter bnep dm_mirror dm_region_hash dm_log dm_mod snd_hda_codec_hdmi coretemp x86_pkg_temp_thermal intel_powerclamp kvm_intel iTCO_wdt ppdev kvm iTCO_vendor_support hp_wmi sparse_keymap crct10dif_pclmul crc32_pclmul ghash_clmulni_intel
> [  414.855073]  drbg ansi_cprng snd_hda_codec_realtek snd_hda_codec_generic aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd snd_hda_intel snd_hda_codec microcode snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm iwlwifi uvcvideo btusb cfg80211 videobuf2_vmalloc videobuf2_memops btrtl btbcm videobuf2_core btintel bluetooth v4l2_common snd_timer videodev snd parport_pc rtsx_pci_ms joydev pcspkr input_leds i2c_i801 media sg memstick rfkill soundcore lpc_ich 8250_fintek parport mei_me hp_accel ie31200_edac shpchp lis3lv02d mei edac_core input_polldev hp_wireless tpm_infineon sch_fq_codel nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sr_mod sd_mod cdrom rtsx_pci_sdmmc mmc_core crc32c_intel serio_raw rtsx_pci nouveau mxm_wmi ahci hwmon libahci e1000e drm_kms_helper
> [  414.855309]  ptp xhci_pci pps_core ttm xhci_hcd wmi video ipv6 autofs4
> [  414.855331] CPU: 2 PID: 875 Comm: NetworkManager Not tainted 4.2.0-5.el7_UNSUPPORTED.x86_64 #1
> [  414.855348] Hardware name: Hewlett-Packard HP ZBook 15 G2/2253, BIOS M70 Ver. 01.07 02/26/2015
> [  414.855365] task: ffff880484698c00 ti: ffff88005859c000 task.ti: ffff88005859c000
> [  414.855380] RIP: 0010:[<ffffffffa0b95a9c>]  [<ffffffffa0b95a9c>] igb_configure_tx_ring+0x14c/0x250 [igb]
> [  414.855401] RSP: 0018:ffff88005859f608  EFLAGS: 00010246
> [  414.855410] RAX: 0000000000003818 RBX: 0000000000000000 RCX: 0000000000003818
> [  414.855424] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000002a9fe6
> [  414.855437] RBP: ffff88005859f638 R08: 0000000003030300 R09: 00000000ffffffe7
> [  414.855451] R10: ffffffff81fa91b4 R11: 00000000000007e3 R12: 0000000000000000
> [  414.855464] R13: ffff880471c98840 R14: ffff8804670a1180 R15: 0000000483cce000
> [  414.855478] FS:  00007f389c6fb8c0(0000) GS:ffff88049dc80000(0000) knlGS:0000000000000000
> [  414.855493] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [  414.855504] CR2: 0000000000003818 CR3: 00000004875da000 CR4: 00000000001406e0
> [  414.855518] Stack:
> [  414.855520]  ffff88005859f638 ffff880471c98840 ffff880471c98df8 0000000000000001
> [  414.855538]  ffff880471c98848 0000000000000001 ffff88005859f698 ffffffffa0b99cb0
> [  414.855555]  ffff88005859f678 59ab02179a7fe4d0 f3ce6b27ad46225f f5454218094e72d1
> [  414.855572] Call Trace:
> [  414.855577]  [<ffffffffa0b99cb0>] igb_configure+0x240/0x400 [igb]
> [  414.855590]  [<ffffffffa0b99f32>] __igb_open+0xc2/0x560 [igb]
> [  414.855602]  [<ffffffff8108f43d>] ? notifier_call_chain+0x4d/0x80
> [  414.855614]  [<ffffffffa0b9a540>] igb_open+0x10/0x20 [igb]
> [  414.855625]  [<ffffffff81581b81>] __dev_open+0xb1/0x130
> [  414.855636]  [<ffffffff81581e91>] __dev_change_flags+0xa1/0x160
> [  414.855647]  [<ffffffff81581f79>] dev_change_flags+0x29/0x60
> [  414.855658]  [<ffffffff8158efc3>] do_setlink+0x5d3/0xaa0
> [  414.855679]  [<ffffffff81308073>] ? nla_parse+0xa3/0x100
> [  414.855689]  [<ffffffff815905f0>] rtnl_newlink+0x4f0/0x880
> [  414.855700]  [<ffffffff815901f3>] ? rtnl_newlink+0xf3/0x880
> [  414.855721]  [<ffffffff815ae23e>] ? netlink_unicast+0x1ae/0x220
> [  414.855734]  [<ffffffff81266648>] ? security_capable+0x48/0x60
> [  414.855746]  [<ffffffff810796bd>] ? ns_capable+0x2d/0x60
> [  414.855756]  [<ffffffff8158db35>] rtnetlink_rcv_msg+0x95/0x240
> [  414.855768]  [<ffffffff8126adc0>] ? sock_has_perm+0x70/0x90
> [  414.855779]  [<ffffffff8158daa0>] ? rtnetlink_rcv+0x40/0x40
> [  414.855789]  [<ffffffff815ae7ff>] netlink_rcv_skb+0xaf/0xc0
> [  414.855800]  [<ffffffff8158da8c>] rtnetlink_rcv+0x2c/0x40
> [  414.855810]  [<ffffffff815ae1de>] netlink_unicast+0x14e/0x220
> [  414.855821]  [<ffffffff815ae5ca>] netlink_sendmsg+0x31a/0x390
> [  414.855833]  [<ffffffff81563208>] sock_sendmsg+0x38/0x50
> [  414.855843]  [<ffffffff81563b4e>] ___sys_sendmsg+0x27e/0x2a0
> [  414.855855]  [<ffffffff8123d82f>] ? sysctl_head_finish+0x3f/0x50
> [  414.855866]  [<ffffffff81077c10>] ? proc_put_long+0xb0/0xb0
> [  414.855877]  [<ffffffff8123d9d9>] ? proc_sys_call_handler+0x79/0xc0
> [  414.855890]  [<ffffffff812ec2fc>] ? lockref_put_or_lock+0x4c/0x80
> [  414.855902]  [<ffffffff81564432>] __sys_sendmsg+0x42/0x80
> [  414.855913]  [<ffffffff81564482>] SyS_sendmsg+0x12/0x20
> [  414.855924]  [<ffffffff8165042e>] entry_SYSCALL_64_fastpath+0x12/0x71
> [  414.855935] Code: c1 49 89 4e 30 49 8b 85 c0 05 00 00 48 85 c0 0f 84 0e 01 00 00 81 c2 10 38 00 00 48 63 d2 48 01 d0 31 d2 89 10 49 8b 46 30 31 d2 <89> 10 41 8b 95 44 06 00 00 b8 14 01 10 02 83
> fa 05 74 0b 83 fa
> [  414.856037] RIP  [<ffffffffa0b95a9c>] igb_configure_tx_ring+0x14c/0x250 [igb]
> [  414.856052]  RSP <ffff88005859f608>
> [  414.856057] CR2: 0000000000003818
> [  414.872327] ---[ end trace e97522c0c584ea70 ]---
>
> This can at least be reduced to a harmless disconnect if we do some
> additional checking of device presence, similar to ixgbe, and use a saved
> io_addr instead of hw_addr, which we may have made NULL.
>
> [ 8010.562550] igb 0000:15:00.0: enabling device (0000 -> 0002)
> [ 8010.597402] pps pps0: new PPS source ptp1
> [ 8010.597406] igb 0000:15:00.0: added PHC on eth0
> [ 8010.597407] igb 0000:15:00.0: Intel(R) Gigabit Ethernet Network Connection
> [ 8010.597409] igb 0000:15:00.0: eth0: (PCIe:2.5Gb/s:Width x1) e8:ea:6a:00:1b:2a
> [ 8010.597543] igb 0000:15:00.0: eth0: PBA No: 000200-000
> [ 8010.597545] igb 0000:15:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
> [ 8010.600468] igb 0000:15:00.0 enp21s0: renamed from eth0
> [ 8010.619354] IPv6: ADDRCONF(NETDEV_UP): enp21s0: link is not ready
> [ 8010.663999] igb 0000:15:00.0 enp21s0: PCIe link lost, device now detached
> [ 8011.012427] igb 0000:15:00.0: Unable to allocate memory for vectors
>
> CC: Mark Rustad <mark.d.rustad@...el.com>
> CC: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
> CC: Alexand Duyck <alexander.duyck@...il.com>
> CC: intel-wired-lan@...ts.osuosl.org
> CC: netdev@...r.kernel.org
> Signed-off-by: Jarod Wilson <jarod@...hat.com>
> ---
>   drivers/net/ethernet/intel/igb/e1000_regs.h |  7 +++----
>   drivers/net/ethernet/intel/igb/igb_main.c   | 14 +++++++-------
>   2 files changed, 10 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h
> index 4af2870..0227f0b 100644
> --- a/drivers/net/ethernet/intel/igb/e1000_regs.h
> +++ b/drivers/net/ethernet/intel/igb/e1000_regs.h
> @@ -368,7 +368,7 @@
>   
>   struct e1000_hw;
>   
> -u32 igb_rd32(struct e1000_hw *hw, u32 reg);
> +u32 igb_rd32(struct e1000_hw *hw, u32 reg, u32 offset);
>   

There is no need to modify igb_rd32.

>   /* write operations, indexed using DWORDS */
>   #define wr32(reg, val) \
> @@ -378,15 +378,14 @@ do { \
>   		writel((val), &hw_addr[(reg)]); \
>   } while (0)
>   
> -#define rd32(reg) (igb_rd32(hw, reg))
> +#define rd32(reg) (igb_rd32(hw, reg, 0))
>   
>   #define wrfl() ((void)rd32(E1000_STATUS))
>   
>   #define array_wr32(reg, offset, value) \
>   	wr32((reg) + ((offset) << 2), (value))
>   
> -#define array_rd32(reg, offset) \
> -	(readl(hw->hw_addr + reg + ((offset) << 2)))
> +#define array_rd32(reg, offset) (igb_rd32(hw, reg, offset << 2))
>   

What you could do here is just call (igb_rd32(hw, reg + ((offset) << 
2))).  It is important to keep offset wrapped in an extra set of 
parenthesis because this is a macro so if there is some expression being 
passed as the offset you want to make sure the result of the expression 
is shifted instead of the last part of it.

>   /* DMA Coalescing registers */
>   #define E1000_PCIEMISC	0x05BB8 /* PCIE misc config register */
> diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
> index d645d65..3b21f85 100644
> --- a/drivers/net/ethernet/intel/igb/igb_main.c
> +++ b/drivers/net/ethernet/intel/igb/igb_main.c
> @@ -743,7 +743,7 @@ static void igb_cache_ring_register(struct igb_adapter *adapter)
>   	}
>   }
>   
> -u32 igb_rd32(struct e1000_hw *hw, u32 reg)
> +u32 igb_rd32(struct e1000_hw *hw, u32 reg, u32 offset)
>   {
>   	struct igb_adapter *igb = container_of(hw, struct igb_adapter, hw);
>   	u8 __iomem *hw_addr = ACCESS_ONCE(hw->hw_addr);
> @@ -752,10 +752,10 @@ u32 igb_rd32(struct e1000_hw *hw, u32 reg)
>   	if (E1000_REMOVED(hw_addr))
>   		return ~value;
>   
> -	value = readl(&hw_addr[reg]);
> +	value = readl(&hw_addr[reg + offset]);
>   
>   	/* reads should not return all F's */
> -	if (!(~value) && (!reg || !(~readl(hw_addr)))) {
> +	if (!(~value) && (!(reg + offset) || !(~readl(hw_addr)))) {
>   		struct net_device *netdev = igb->netdev;
>   		hw->hw_addr = NULL;
>   		netif_device_detach(netdev);

These changes aren't necessary if you just pass reg + offset instead of 
reg and offset as two separate variables.

> @@ -959,7 +959,7 @@ static int igb_request_msix(struct igb_adapter *adapter)
>   
>   		vector++;
>   
> -		q_vector->itr_register = hw->hw_addr + E1000_EITR(vector);
> +		q_vector->itr_register = adapter->io_addr + E1000_EITR(vector);
>   
>   		if (q_vector->rx.ring && q_vector->tx.ring)
>   			sprintf(q_vector->name, "%s-TxRx-%u", netdev->name,
> @@ -1230,7 +1230,7 @@ static int igb_alloc_q_vector(struct igb_adapter *adapter,
>   	q_vector->tx.work_limit = adapter->tx_work_limit;
>   
>   	/* initialize ITR configuration */
> -	q_vector->itr_register = adapter->hw.hw_addr + E1000_EITR(0);
> +	q_vector->itr_register = adapter->io_addr + E1000_EITR(0);
>   	q_vector->itr_val = IGB_START_ITR;
>   
>   	/* initialize pointer to rings */
> @@ -3284,7 +3284,7 @@ void igb_configure_tx_ring(struct igb_adapter *adapter,
>   	     tdba & 0x00000000ffffffffULL);
>   	wr32(E1000_TDBAH(reg_idx), tdba >> 32);
>   
> -	ring->tail = hw->hw_addr + E1000_TDT(reg_idx);
> +	ring->tail = adapter->io_addr + E1000_TDT(reg_idx);
>   	wr32(E1000_TDH(reg_idx), 0);
>   	writel(0, ring->tail);
>   
> @@ -3640,7 +3640,7 @@ void igb_configure_rx_ring(struct igb_adapter *adapter,
>   	     ring->count * sizeof(union e1000_adv_rx_desc));
>   
>   	/* initialize head and tail */
> -	ring->tail = hw->hw_addr + E1000_RDT(reg_idx);
> +	ring->tail = adapter->io_addr + E1000_RDT(reg_idx);
>   	wr32(E1000_RDH(reg_idx), 0);
>   	writel(0, ring->tail);
>   

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ