| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5614CAC7.3080002@ti.com>
Date: Wed, 7 Oct 2015 10:33:27 +0300
From: Roger Quadros <rogerq@...com>
To: Chanwoo Choi <cw00.choi@...sung.com>,
<linux-kernel@...r.kernel.org>
CC: <k.kozlowski@...sung.com>, <ckeepax@...nsource.wolfsonmicro.com>,
<gregkh@...uxfoundation.org>, <ramakrishna.pallala@...el.com>,
<patches@...nsource.wolfsonmicro.com>, <myungjoo.ham@...sung.com>
Subject: Re: [PATCH v3] extcon: Modify the id and name of external connector
On 07/10/15 03:48, Chanwoo Choi wrote:
> This patch modifies the id and name of external connector with the
> additional prefix to clarify both attribute and meaning of external
> connector as following:
> - EXTCON_CHG_* mean the charger connector.
> - EXTCON_JACK_* mean the jack connector.
> - EXTCON_DISP_* mean the display port connector.
>
> Following table show the new name of external connector with old name:
> --------------------------------------------------
> Old extcon name | New extcon name |
> --------------------------------------------------
> EXTCON_TA | EXTCON_CHG_USB_DCP |
> EXTCON_CHARGE_DOWNSTREAM| EXTCON_CHG_USB_CDP |
> EXTCON_FAST_CHARGER | EXTCON_CHG_USB_DCP_FAST|
> EXTCON_SLOW_CHARGER | EXTCON_CHG_USB_DCP_SLOW|
I still have some concerns regarding the name DCP_FAST and DCP_SLOW.
If I see the charger IC drivers that use FAST & SLOW, they either call it
APPLE_500MA/1A or SPECIAL_500MA/1A.
They are probably not compliant with USB DCP specification and hence
the special name.
So, should we call them EXTCON_CHG_USB_SPECIAL_FAST/SLOW instead?
> --------------------------------------------------
> EXTCON_MICROPHONE | EXTCON_JACK_MICROPHONE |
> EXTCON_HEADPHONE | EXTCON_JACK_HEADPHONE |
> EXTCON_LINE_IN | EXTCON_JACK_LINE_IN |
> EXTCON_LINE_OUT | EXTCON_JACK_LINE_OUT |
> EXTCON_VIDEO_IN | EXTCON_JACK_VIDEO_IN |
> EXTCON_VIDEO_OUT | EXTCON_JACK_VIDEO_OUT |
> EXTCON_SPDIF_IN | EXTCON_JACK_SPDIF_IN |
> EXTCON_SPDIF_OUT | EXTCON_JACK_SPDIF_OUT |
> --------------------------------------------------
> EXTCON_HMDI | EXTCON_DISP_HDMI |
> EXTCON_MHL | EXTCON_DISP_MHL |
> EXTCON_DVI | EXTCON_DISP_DVI |
> EXTCON_VGA | EXTCON_DISP_VGA |
> --------------------------------------------------
>
> And, when altering the name of USB charger connector, EXTCON refers to the
> "Battery Charging v1.2 Spec and Adopters Agreement"[1] to use the standard
> name of USB charging port as following. Following name of USB charging port
> are already used in power_supply subsystem. We chan check it on patch[2].
> - EXTCON_CHG_USB_DCP /* Dedicated Charging Port */
> - EXTCON_CHG_USB_CDP /* Charging Downstream Port */
> - EXTCON_CHG_USB_ACA /* Accessory Charger Adapter */
>
> [1] www.usb.org/developers/docs/devclass_docs/BCv1.2_070312.zip
> [2] commit 85efc8a18ced ("power_supply: Add types for USB chargers")
>
> Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
> [ckeepax: For the Arizona changes]
> Acked-by: Charles Keepax <ckeepax@...nsource.wolfsonmicro.com>
> ---
> Changes from v2:
> (https://lkml.org/lkml/2015/10/6/239)
> - Remove the EXTCON_CHG_USB type to remove the possible confusion according to
> Roger's comment and drop patch2 about EXTCON_CHG_USB.
> - Fix the warning issue provided by scripts/checkpatch.pl
>
> Changes from v1:
> (https://lkml.org/lkml/2015/10/3/304)
> - Add acked tag by Charles Keepax for arizona changes
> - Modify the name of USB charger connector as following:
> : EXTCON_CHG_USB_FAST -> EXTCON_CHG_USB_DCP_FAST
> : EXTCON_CHG_USB_SLOW -> EXTCON_CHG_USB_DCP_SLOW
> - Add the missing EXTCON_CHG_USB_ACA charger connector
> - Add one more patch to support the EXTCON_CHG_USB when SDP port is connected
> or not
>
> drivers/extcon/extcon-arizona.c | 18 ++++++------
> drivers/extcon/extcon-axp288.c | 12 ++++----
> drivers/extcon/extcon-max14577.c | 17 +++++------
> drivers/extcon/extcon-max77693.c | 32 +++++++++++----------
> drivers/extcon/extcon-max77843.c | 27 ++++++++++--------
> drivers/extcon/extcon-max8997.c | 21 +++++++-------
> drivers/extcon/extcon-rt8973a.c | 4 +--
> drivers/extcon/extcon-sm5502.c | 4 +--
> drivers/extcon/extcon.c | 60 ++++++++++++++++++++-------------------
> include/linux/extcon.h | 61 +++++++++++++++++++++++-----------------
> 10 files changed, 137 insertions(+), 119 deletions(-)
>
> diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
> index a1ab0a56b798..e4890dd4fefd 100644
> --- a/drivers/extcon/extcon-arizona.c
> +++ b/drivers/extcon/extcon-arizona.c
> @@ -137,9 +137,9 @@ static const int arizona_micd_levels[] = {
>
> static const unsigned int arizona_cable[] = {
> EXTCON_MECHANICAL,
> - EXTCON_MICROPHONE,
> - EXTCON_HEADPHONE,
> - EXTCON_LINE_OUT,
> + EXTCON_JACK_MICROPHONE,
> + EXTCON_JACK_HEADPHONE,
> + EXTCON_JACK_LINE_OUT,
> EXTCON_NONE,
> };
>
> @@ -600,7 +600,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
> struct arizona_extcon_info *info = data;
> struct arizona *arizona = info->arizona;
> int id_gpio = arizona->pdata.hpdet_id_gpio;
> - unsigned int report = EXTCON_HEADPHONE;
> + unsigned int report = EXTCON_JACK_HEADPHONE;
> int ret, reading;
> bool mic = false;
>
> @@ -645,9 +645,9 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
>
> /* Report high impedence cables as line outputs */
> if (reading >= 5000)
> - report = EXTCON_LINE_OUT;
> + report = EXTCON_JACK_LINE_OUT;
> else
> - report = EXTCON_HEADPHONE;
> + report = EXTCON_JACK_HEADPHONE;
>
> ret = extcon_set_cable_state_(info->edev, report, true);
> if (ret != 0)
> @@ -732,7 +732,7 @@ err:
> ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
>
> /* Just report headphone */
> - ret = extcon_set_cable_state_(info->edev, EXTCON_HEADPHONE, true);
> + ret = extcon_set_cable_state_(info->edev, EXTCON_JACK_HEADPHONE, true);
> if (ret != 0)
> dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
>
> @@ -789,7 +789,7 @@ err:
> ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
>
> /* Just report headphone */
> - ret = extcon_set_cable_state_(info->edev, EXTCON_HEADPHONE, true);
> + ret = extcon_set_cable_state_(info->edev, EXTCON_JACK_HEADPHONE, true);
> if (ret != 0)
> dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
>
> @@ -915,7 +915,7 @@ static void arizona_micd_detect(struct work_struct *work)
> arizona_identify_headphone(info);
>
> ret = extcon_set_cable_state_(info->edev,
> - EXTCON_MICROPHONE, true);
> + EXTCON_JACK_MICROPHONE, true);
> if (ret != 0)
> dev_err(arizona->dev, "Headset report failed: %d\n",
> ret);
> diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
> index 9668d6a94e38..14e748051288 100644
> --- a/drivers/extcon/extcon-axp288.c
> +++ b/drivers/extcon/extcon-axp288.c
> @@ -102,9 +102,9 @@ enum axp288_extcon_irq {
> };
>
> static const unsigned int axp288_extcon_cables[] = {
> - EXTCON_SLOW_CHARGER,
> - EXTCON_CHARGE_DOWNSTREAM,
> - EXTCON_FAST_CHARGER,
> + EXTCON_CHG_USB_DCP_SLOW,
> + EXTCON_CHG_USB_CDP,
> + EXTCON_CHG_USB_DCP_FAST,
> EXTCON_NONE,
> };
>
> @@ -192,18 +192,18 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
> dev_dbg(info->dev, "sdp cable is connecetd\n");
as per comment this seems to be SDP.
> notify_otg = true;
> notify_charger = true;
> - cable = EXTCON_SLOW_CHARGER;
> + cable = EXTCON_CHG_USB_DCP_SLOW;
So shouldn't this be cable = EXTCON_USB?
> break;
> case DET_STAT_CDP:
> dev_dbg(info->dev, "cdp cable is connecetd\n");
> notify_otg = true;
> notify_charger = true;
> - cable = EXTCON_CHARGE_DOWNSTREAM;
> + cable = EXTCON_CHG_USB_CDP;
> break;
> case DET_STAT_DCP:
> dev_dbg(info->dev, "dcp cable is connecetd\n");
This looks like standard DCP.
> notify_charger = true;
> - cable = EXTCON_FAST_CHARGER;
> + cable = EXTCON_CHG_USB_DCP_FAST;
Shouldn't this be cable = EXTCON_CHG_USB_DCP?
> break;
> default:
> dev_warn(info->dev,
> diff --git a/drivers/extcon/extcon-max14577.c b/drivers/extcon/extcon-max14577.c
> index df0659d98e5a..15c2dcc73fc6 100644
> --- a/drivers/extcon/extcon-max14577.c
> +++ b/drivers/extcon/extcon-max14577.c
> @@ -150,10 +150,10 @@ enum max14577_muic_acc_type {
>
> static const unsigned int max14577_extcon_cable[] = {
> EXTCON_USB,
> - EXTCON_TA,
> - EXTCON_FAST_CHARGER,
> - EXTCON_SLOW_CHARGER,
> - EXTCON_CHARGE_DOWNSTREAM,
> + EXTCON_CHG_USB_DCP,
> + EXTCON_CHG_USB_DCP_FAST,
> + EXTCON_CHG_USB_DCP_SLOW,
> + EXTCON_CHG_USB_CDP,
> EXTCON_JIG,
> EXTCON_NONE,
> };
> @@ -456,18 +456,19 @@ static int max14577_muic_chg_handler(struct max14577_muic_info *info)
> extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
> break;
> case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
> - extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
> + extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
> + attached);
> break;
> case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
> - extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
> + extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
> attached);
> break;
> case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
> - extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
> + extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP_SLOW,
> attached);
> break;
> case MAX14577_CHARGER_TYPE_SPECIAL_1A:
> - extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
> + extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP_FAST,
> attached);
> break;
> case MAX14577_CHARGER_TYPE_NONE:
> diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
> index 35b9e118b2fb..794199920070 100644
> --- a/drivers/extcon/extcon-max77693.c
> +++ b/drivers/extcon/extcon-max77693.c
> @@ -204,11 +204,11 @@ enum max77693_muic_acc_type {
> static const unsigned int max77693_extcon_cable[] = {
> EXTCON_USB,
> EXTCON_USB_HOST,
> - EXTCON_TA,
> - EXTCON_FAST_CHARGER,
> - EXTCON_SLOW_CHARGER,
> - EXTCON_CHARGE_DOWNSTREAM,
> - EXTCON_MHL,
> + EXTCON_CHG_USB_DCP,
> + EXTCON_CHG_USB_DCP_FAST,
> + EXTCON_CHG_USB_DCP_SLOW,
> + EXTCON_CHG_USB_CDP,
> + EXTCON_DISP_MHL,
> EXTCON_JIG,
> EXTCON_DOCK,
> EXTCON_NONE,
> @@ -505,7 +505,7 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
> return ret;
>
> extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached);
> - extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
> + extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
> goto out;
> case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE: /* Dock-Desk */
> dock_id = EXTCON_DOCK;
> @@ -605,7 +605,7 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
> case MAX77693_MUIC_GND_MHL:
> case MAX77693_MUIC_GND_MHL_VB:
> /* MHL or MHL with USB/TA cable */
> - extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
> + extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
> break;
> default:
> dev_err(info->dev, "failed to detect %s cable of gnd type\n",
> @@ -801,10 +801,11 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
> * - Support charging through micro-usb port without
> * data connection
> */
> - extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
> + extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
> + attached);
> if (!cable_attached)
> - extcon_set_cable_state_(info->edev, EXTCON_MHL,
> - cable_attached);
> + extcon_set_cable_state_(info->edev,
> + EXTCON_DISP_MHL, cable_attached);
> break;
> }
>
> @@ -862,7 +863,7 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
>
> extcon_set_cable_state_(info->edev, EXTCON_DOCK,
> attached);
> - extcon_set_cable_state_(info->edev, EXTCON_MHL,
> + extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL,
> attached);
> break;
> }
> @@ -901,20 +902,21 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
> break;
> case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
> /* Only TA cable */
> - extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
> + extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
> + attached);
> break;
> }
> break;
> case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT:
> - extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
> + extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
> attached);
> break;
> case MAX77693_CHARGER_TYPE_APPLE_500MA:
> - extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
> + extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP_SLOW,
> attached);
Here it says APPLE_500MA. Looks like it is not same as USB DCP.
So probably USB_DCP_SLOW is a wrong name for it.
So EXTCON_CHG_USB_SPECIAL_SLOW?
> break;
> case MAX77693_CHARGER_TYPE_APPLE_1A_2A:
> - extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
> + extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP_FAST,
> attached);
EXTCON_CHG_USB_SPECIAL_FAST?
> break;
> case MAX77693_CHARGER_TYPE_DEAD_BATTERY:
> diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c
> index fdd928542c19..97aebe5d67a6 100644
> --- a/drivers/extcon/extcon-max77843.c
> +++ b/drivers/extcon/extcon-max77843.c
> @@ -122,11 +122,11 @@ enum max77843_muic_charger_type {
> static const unsigned int max77843_extcon_cable[] = {
> EXTCON_USB,
> EXTCON_USB_HOST,
> - EXTCON_TA,
> - EXTCON_CHARGE_DOWNSTREAM,
> - EXTCON_FAST_CHARGER,
> - EXTCON_SLOW_CHARGER,
> - EXTCON_MHL,
> + EXTCON_CHG_USB_DCP,
> + EXTCON_CHG_USB_CDP,
> + EXTCON_CHG_USB_DCP_FAST,
> + EXTCON_CHG_USB_DCP_SLOW,
> + EXTCON_DISP_MHL,
> EXTCON_JIG,
> EXTCON_NONE,
> };
> @@ -355,7 +355,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
> if (ret < 0)
> return ret;
>
> - extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
> + extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
> break;
> default:
> dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n",
> @@ -494,7 +494,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
> if (ret < 0)
> return ret;
>
> - extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
> + extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
> attached);
> break;
> case MAX77843_MUIC_CHG_DEDICATED:
> @@ -504,7 +504,8 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
> if (ret < 0)
> return ret;
>
> - extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
> + extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
> + attached);
> break;
> case MAX77843_MUIC_CHG_SPECIAL_500MA:
> ret = max77843_muic_set_path(info,
> @@ -513,7 +514,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
> if (ret < 0)
> return ret;
>
> - extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
> + extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP_SLOW,
> attached);
Here it is SPECIAL_500MA. Again this might not be compliant to USB DCP.
EXTCON_CHG_USB_SPECIAL_SLOW?
> break;
> case MAX77843_MUIC_CHG_SPECIAL_1A:
> @@ -523,7 +524,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
> if (ret < 0)
> return ret;
>
> - extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
> + extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP_FAST,
> attached);
EXTCON_CHG_USB_SPECIAL_FAST?
> break;
> case MAX77843_MUIC_CHG_GND:
> @@ -532,9 +533,11 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
>
> /* Charger cable on MHL accessory is attach or detach */
> if (gnd_type == MAX77843_MUIC_GND_MHL_VB)
> - extcon_set_cable_state_(info->edev, EXTCON_TA, true);
> + extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
> + true);
> else if (gnd_type == MAX77843_MUIC_GND_MHL)
> - extcon_set_cable_state_(info->edev, EXTCON_TA, false);
> + extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
> + false);
> break;
> case MAX77843_MUIC_CHG_NONE:
> break;
> diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
> index 7b1ef200b121..8dbec5febdb6 100644
> --- a/drivers/extcon/extcon-max8997.c
> +++ b/drivers/extcon/extcon-max8997.c
> @@ -148,11 +148,11 @@ struct max8997_muic_info {
> static const unsigned int max8997_extcon_cable[] = {
> EXTCON_USB,
> EXTCON_USB_HOST,
> - EXTCON_TA,
> - EXTCON_FAST_CHARGER,
> - EXTCON_SLOW_CHARGER,
> - EXTCON_CHARGE_DOWNSTREAM,
> - EXTCON_MHL,
> + EXTCON_CHG_USB_DCP,
> + EXTCON_CHG_USB_DCP_FAST,
> + EXTCON_CHG_USB_DCP_SLOW,
> + EXTCON_CHG_USB_CDP,
> + EXTCON_DISP_MHL,
> EXTCON_DOCK,
> EXTCON_JIG,
> EXTCON_NONE,
> @@ -403,7 +403,7 @@ static int max8997_muic_adc_handler(struct max8997_muic_info *info)
> return ret;
> break;
> case MAX8997_MUIC_ADC_MHL:
> - extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
> + extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
> break;
> case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF:
> case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON:
> @@ -486,18 +486,19 @@ static int max8997_muic_chg_handler(struct max8997_muic_info *info)
> }
> break;
> case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
> - extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
> + extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
> attached);
> break;
> case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
> - extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
> + extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
> + attached);
> break;
> case MAX8997_CHARGER_TYPE_500MA:
> - extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
> + extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP_SLOW,
> attached);
EXTCON_CHG_USB_SPECIAL_SLOW?
> break;
> case MAX8997_CHARGER_TYPE_1A:
> - extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
> + extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP_FAST,
> attached);
EXTCON_CHG_USB_SPECIAL_FAST?
> break;
> default:
> diff --git a/drivers/extcon/extcon-rt8973a.c b/drivers/extcon/extcon-rt8973a.c
> index 1bc3737ea01c..36bf1d63791c 100644
> --- a/drivers/extcon/extcon-rt8973a.c
> +++ b/drivers/extcon/extcon-rt8973a.c
> @@ -93,7 +93,7 @@ static struct reg_data rt8973a_reg_data[] = {
> static const unsigned int rt8973a_extcon_cable[] = {
> EXTCON_USB,
> EXTCON_USB_HOST,
> - EXTCON_TA,
> + EXTCON_CHG_USB_DCP,
> EXTCON_JIG,
> EXTCON_NONE,
> };
> @@ -333,7 +333,7 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info,
> con_sw = DM_DP_SWITCH_USB;
> break;
> case RT8973A_MUIC_ADC_TA:
> - id = EXTCON_TA;
> + id = EXTCON_CHG_USB_DCP;
> con_sw = DM_DP_SWITCH_OPEN;
> break;
> case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB:
> diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c
> index 2945091bfd0e..7aac3cc7efd7 100644
> --- a/drivers/extcon/extcon-sm5502.c
> +++ b/drivers/extcon/extcon-sm5502.c
> @@ -95,7 +95,7 @@ static struct reg_data sm5502_reg_data[] = {
> static const unsigned int sm5502_extcon_cable[] = {
> EXTCON_USB,
> EXTCON_USB_HOST,
> - EXTCON_TA,
> + EXTCON_CHG_USB_DCP,
> EXTCON_NONE,
> };
>
> @@ -389,7 +389,7 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
> vbus_sw = VBUSIN_SWITCH_VBUSOUT_WITH_USB;
> break;
> case SM5502_MUIC_ADC_OPEN_TA:
> - id = EXTCON_TA;
> + id = EXTCON_CHG_USB_DCP;
> con_sw = DM_DP_SWITCH_OPEN;
> vbus_sw = VBUSIN_SWITCH_VBUSOUT;
> break;
> diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
> index 8dd0af1d50bc..3caa993259fb 100644
> --- a/drivers/extcon/extcon.c
> +++ b/drivers/extcon/extcon.c
> @@ -39,37 +39,39 @@
> #define CABLE_NAME_MAX 30
>
> static const char *extcon_name[] = {
> - [EXTCON_NONE] = "NONE",
> + [EXTCON_NONE] = "EXTCON_NONE",
>
> /* USB external connector */
> - [EXTCON_USB] = "USB",
> - [EXTCON_USB_HOST] = "USB-HOST",
> -
> - /* Charger external connector */
> - [EXTCON_TA] = "TA",
> - [EXTCON_FAST_CHARGER] = "FAST-CHARGER",
> - [EXTCON_SLOW_CHARGER] = "SLOW-CHARGER",
> - [EXTCON_CHARGE_DOWNSTREAM] = "CHARGE-DOWNSTREAM",
> -
> - /* Audio/Video external connector */
> - [EXTCON_LINE_IN] = "LINE-IN",
> - [EXTCON_LINE_OUT] = "LINE-OUT",
> - [EXTCON_MICROPHONE] = "MICROPHONE",
> - [EXTCON_HEADPHONE] = "HEADPHONE",
> -
> - [EXTCON_HDMI] = "HDMI",
> - [EXTCON_MHL] = "MHL",
> - [EXTCON_DVI] = "DVI",
> - [EXTCON_VGA] = "VGA",
> - [EXTCON_SPDIF_IN] = "SPDIF-IN",
> - [EXTCON_SPDIF_OUT] = "SPDIF-OUT",
> - [EXTCON_VIDEO_IN] = "VIDEO-IN",
> - [EXTCON_VIDEO_OUT] = "VIDEO-OUT",
> -
> - /* Etc external connector */
> - [EXTCON_DOCK] = "DOCK",
> - [EXTCON_JIG] = "JIG",
> - [EXTCON_MECHANICAL] = "MECHANICAL",
> + [EXTCON_USB] = "EXTCON_USB",
> + [EXTCON_USB_HOST] = "EXTCON_USB_HOST",
> +
> + /* Charging external connector */
> + [EXTCON_CHG_USB_DCP] = "EXTCON_CHG_USB_DCP",
> + [EXTCON_CHG_USB_CDP] = "EXTCON_CHG_USB_CDP",
> + [EXTCON_CHG_USB_ACA] = "EXTCON_CHG_USB_ACA",
> + [EXTCON_CHG_USB_DCP_FAST] = "EXTCON_CHG_USB_DCP_FAST",
> + [EXTCON_CHG_USB_DCP_SLOW] = "EXTCON_CHG_USB_DCP_SLOW",
> +
> + /* Jack external connector */
> + [EXTCON_JACK_MICROPHONE] = "EXTCON_JACK_MICROPHONE",
> + [EXTCON_JACK_HEADPHONE] = "EXTCON_JACK_HEADPHONE",
> + [EXTCON_JACK_LINE_IN] = "EXTCON_JACK_LINE_IN",
> + [EXTCON_JACK_LINE_OUT] = "EXTCON_JACK_LINE_OUT",
> + [EXTCON_JACK_VIDEO_IN] = "EXTCON_JACK_VIDEO_IN",
> + [EXTCON_JACK_VIDEO_OUT] = "EXTCON_JACK_VIDEO_OUT",
> + [EXTCON_JACK_SPDIF_IN] = "EXTCON_JACK_SPDIF_IN",
> + [EXTCON_JACK_SPDIF_OUT] = "EXTCON_JACK_SPDIF_OUT",
> +
> + /* Display external connector */
> + [EXTCON_DISP_HDMI] = "EXTCON_DISP_HDMI",
> + [EXTCON_DISP_MHL] = "EXTCON_DISP_MHL",
> + [EXTCON_DISP_DVI] = "EXTCON_DISP_DVI",
> + [EXTCON_DISP_VGA] = "EXTCON_DISP_VGA",
> +
> + /* Miscellaneous external connector */
> + [EXTCON_DOCK] = "EXTCON_DOCK",
> + [EXTCON_JIG] = "EXTCON_JIG",
> + [EXTCON_MECHANICAL] = "EXTCON_MECHANICAL",
>
> NULL,
> };
> diff --git a/include/linux/extcon.h b/include/linux/extcon.h
> index c0f8c4fc5d45..2625a89c2809 100644
> --- a/include/linux/extcon.h
> +++ b/include/linux/extcon.h
> @@ -31,32 +31,41 @@
> /*
> * Define the unique id of supported external connectors
> */
> -#define EXTCON_NONE 0
> -
> -#define EXTCON_USB 1 /* USB connector */
> -#define EXTCON_USB_HOST 2
> -
> -#define EXTCON_TA 3 /* Charger connector */
> -#define EXTCON_FAST_CHARGER 4
> -#define EXTCON_SLOW_CHARGER 5
> -#define EXTCON_CHARGE_DOWNSTREAM 6
> -
> -#define EXTCON_LINE_IN 7 /* Audio/Video connector */
> -#define EXTCON_LINE_OUT 8
> -#define EXTCON_MICROPHONE 9
> -#define EXTCON_HEADPHONE 10
> -#define EXTCON_HDMI 11
> -#define EXTCON_MHL 12
> -#define EXTCON_DVI 13
> -#define EXTCON_VGA 14
> -#define EXTCON_SPDIF_IN 15
> -#define EXTCON_SPDIF_OUT 16
> -#define EXTCON_VIDEO_IN 17
> -#define EXTCON_VIDEO_OUT 18
> -
> -#define EXTCON_DOCK 19 /* Misc connector */
> -#define EXTCON_JIG 20
> -#define EXTCON_MECHANICAL 21
> +#define EXTCON_NONE 0
> +
> +/* USB external connector */
> +#define EXTCON_USB 1 /* Standard Downstream Port */
> +#define EXTCON_USB_HOST 2
> +
> +/* Charging external connector */
> +#define EXTCON_CHG_USB_DCP 5 /* Dedicated Charging Port */
> +#define EXTCON_CHG_USB_CDP 6 /* Charging Downstream Port */
> +#define EXTCON_CHG_USB_ACA 7 /* Accessory Charger Adapter */
> +#define EXTCON_CHG_USB_DCP_FAST 8
> +#define EXTCON_CHG_USB_DCP_SLOW 9
> +
> +/* Jack external connector */
> +#define EXTCON_JACK_MICROPHONE 20
> +#define EXTCON_JACK_HEADPHONE 21
> +#define EXTCON_JACK_LINE_IN 22
> +#define EXTCON_JACK_LINE_OUT 23
> +#define EXTCON_JACK_VIDEO_IN 24
> +#define EXTCON_JACK_VIDEO_OUT 25
> +#define EXTCON_JACK_SPDIF_IN 26 /* Sony Philips Digital InterFace */
> +#define EXTCON_JACK_SPDIF_OUT 27
> +
> +/* Display external connector */
> +#define EXTCON_DISP_HDMI 40 /* High-Definition Multimedia Interface */
> +#define EXTCON_DISP_MHL 41 /* Mobile High-Definition Link */
> +#define EXTCON_DISP_DVI 42 /* Digital Visual Interface */
> +#define EXTCON_DISP_VGA 43 /* Video Graphics Array */
> +
> +/* Miscellaneous external connector */
> +#define EXTCON_DOCK 60
> +#define EXTCON_JIG 61
> +#define EXTCON_MECHANICAL 62
> +
> +#define EXTCON_NUM 63
>
> struct extcon_cable;
>
>
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists