| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 7 Oct 2015 15:33:43 +0300
From: Mika Westerberg <mika.westerberg@...ux.intel.com>
To: Jiri Kosina <jikos@...nel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@...hat.com>,
Mika Westerberg <mika.westerberg@...ux.intel.com>,
linux-input@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2] HID: multitouch: Fetch feature reports on demand for Win8 devices
Some newer Intel Skylake based Dell laptops with Win8 precision touchpad
fail when initial feature reports are fetched from it. Below is an example
output with some additional debug included:
i2c_hid i2c-DLL0704:01: Fetching the HID descriptor
i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=20 00
i2c_hid i2c-DLL0704:01: HID Descriptor: 1e 00 00 01 99 02 21 00 24 ...
...
i2c_hid i2c-DLL0704:01: i2c_hid_get_report
i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=22 00 38 02 23 00
i2c_hid i2c-DLL0704:01: report (len=4): 04 00 08 05
i2c_hid i2c-DLL0704:01: report id 13
i2c_hid i2c-DLL0704:01: i2c_hid_get_report
i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=22 00 3d 02 23 00
i2c_hid i2c-DLL0704:01: failed to retrieve report from device.
i2c_hid i2c-DLL0704:01: report id 7
i2c_hid i2c-DLL0704:01: i2c_hid_get_report
i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=22 00 37 02 23 00
i2c_hid i2c-DLL0704:01: report (len=259): 03 01 07 fc 28 fe 84 40 ...
i2c_hid i2c-DLL0704:01: report id 4
i2c_hid i2c-DLL0704:01: i2c_hid_get_report
i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=22 00 34 02 23 00
We manage to fetch few reports but then the touchpad dies:
i2c_designware i2c_designware.1: i2c_dw_handle_tx_abort: lost arbitration
i2c_hid i2c-DLL0704:01: failed to retrieve report from device.
it eventually pulls the whole I2C bus low:
i2c_designware i2c_designware.1: controller timed out
i2c_hid i2c-DLL0704:01: failed to set a report to device.
Fix this by preventing initial feature report retrieval for Win8 devices.
Instead we fetch reports as needed in mt_feature_mapping(). This prevents
fetching reports which might cause problems with the device in question.
Suggested-by: Benjamin Tissoires <benjamin.tissoires@...hat.com>
Signed-off-by: Mika Westerberg <mika.westerberg@...ux.intel.com>
---
Added check for MT_CLS_WIN_8 so that the fix is only done for real Win8
devices.
drivers/hid/hid-multitouch.c | 45 +++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 44 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 661b4fce1a5d..dd64461e5e85 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -309,6 +309,41 @@ static struct attribute_group mt_attribute_group = {
.attrs = sysfs_attrs
};
+static void mt_get_feature(struct hid_device *hdev, struct hid_report *report)
+{
+ struct mt_device *td = hid_get_drvdata(hdev);
+ int ret, size = hid_report_len(report);
+ u8 *buf;
+
+ /*
+ * Only fetch the feature report if initial reports are not already
+ * been retrieved. Currently this is only done for Windows 8 touch
+ * devices.
+ */
+ if (!(hdev->quirks & HID_QUIRK_NO_INIT_REPORTS))
+ return;
+ if (td->mtclass.name != MT_CLS_WIN_8)
+ return;
+
+ buf = hid_alloc_report_buf(report, GFP_KERNEL);
+ if (!buf)
+ return;
+
+ ret = hid_hw_raw_request(hdev, report->id, buf, size,
+ HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
+ if (ret < 0) {
+ dev_warn(&hdev->dev, "failed to fetch feature %d\n",
+ report->id);
+ } else {
+ ret = hid_report_raw_event(hdev, HID_FEATURE_REPORT, buf,
+ size, 0);
+ if (ret)
+ dev_warn(&hdev->dev, "failed to report feature\n");
+ }
+
+ kfree(buf);
+}
+
static void mt_feature_mapping(struct hid_device *hdev,
struct hid_field *field, struct hid_usage *usage)
{
@@ -327,6 +362,8 @@ static void mt_feature_mapping(struct hid_device *hdev,
break;
case HID_DG_CONTACTMAX:
+ mt_get_feature(hdev, field->report);
+
td->maxcontact_report_id = field->report->id;
td->maxcontacts = field->value[0];
if (!td->maxcontacts &&
@@ -343,6 +380,7 @@ static void mt_feature_mapping(struct hid_device *hdev,
break;
}
+ mt_get_feature(hdev, field->report);
if (field->value[usage->usage_index] == MT_BUTTONTYPE_CLICKPAD)
td->is_buttonpad = true;
@@ -1029,8 +1067,13 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
* reports. Fortunately, the Win8 spec says that all touches
* should be sent during each report, making the initialization
* of input reports unnecessary.
+ *
+ * In addition some touchpads do not behave well if we read
+ * all feature reports from them. Instead we prevent
+ * initial report fetching and then selectively fetch each
+ * report we are interested in.
*/
- hdev->quirks |= HID_QUIRK_NO_INIT_INPUT_REPORTS;
+ hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS;
td = devm_kzalloc(&hdev->dev, sizeof(struct mt_device), GFP_KERNEL);
if (!td) {
--
2.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists