lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <1444177807-15524-4-git-send-email-k.kozlowski@samsung.com>
Date:	Wed, 07 Oct 2015 09:30:07 +0900
From:	Krzysztof Kozlowski <k.kozlowski@...sung.com>
To:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Peter Chen <peter.chen@...escale.com>,
	Marek Szyprowski <m.szyprowski@...sung.com>,
	Ben Gamari <ben@...rt-cactus.org>,
	Wolfram Sang <wsa@...-dreams.de>,
	Krzysztof Kozlowski <k.kozlowski@...sung.com>,
	linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
	devicetree@...r.kernel.org, Kukjin Kim <kgene@...nel.org>,
	linux-arm-kernel@...ts.infradead.org,
	linux-samsung-soc@...r.kernel.org
Cc:	Kevin Hilman <khilman@...nel.org>, Arnd Bergmann <arnd@...db.de>,
	riku.voipio@...aro.org
Subject: [RFT 3/3] ARM: dts: Fix usb3503 probe by enabling phy on
 exynos5250-arndale

On Arndale board (unlike Odroid U3) the USB3503 hub controller is
connected in phy mode (not through I2C). For successful probe it needs
to get reference to proper phy and enable it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
Reported-by: Kevin Hilman <khilman@...nel.org>
Reported-by: Arnd Bergmann <arnd@...db.de>
Cc: Kevin Hilman <khilman@...nel.org>
Cc: Arnd Bergmann <arnd@...db.de>
Cc: riku.voipio@...aro.org
Cc: Marek Szyprowski <m.szyprowski@...sung.com>
---
 arch/arm/boot/dts/exynos5250-arndale.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index c000532c1444..e213f31acbf3 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -114,6 +114,8 @@
 
 		reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
 		connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
+		phys = <&usb2_phy_gen 3>;
+		phy-names = "usb2-phy";
 	};
 };
 
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ