lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Fri, 9 Oct 2015 14:49:59 +0100
From:	Jon Hunter <jonathanh@...dia.com>
To:	Laxman Dewangan <ldewangan@...dia.com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Jiri Slaby <jslaby@...e.com>,
	Stephen Warren <swarren@...dotorg.org>,
	Thierry Reding <thierry.reding@...il.com>,
	Alexandre Courbot <gnurou@...il.com>
CC:	Viresh Kumar <viresh.kumar@...aro.org>,
	<linux-serial@...r.kernel.org>, <linux-tegra@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, Jon Hunter <jonathanh@...dia.com>
Subject: [PATCH 1/4] serial: tegra: Handle another RX race condition

Commit 853a699739fe ("serial: tegra: handle race condition on uart rx
side") attempted to fix a race condition between the RX end of
transmission interrupt and RX DMA completion callback. Despite this
fix there is still another case where these two paths can race and
result in duplicated data. The race condition is as follows:

1. DMA completion interrupt occurs and schedules tasklet to call DMA
   callback.
2. DMA callback for the UART driver starts to execute. This will copy
   the data from the DMA buffer and restart the DMA. This is done under
   uart port spinlock.
3. During the callback, UART interrupt is raised for end of receive. The
   UART ISR runs and waits to acquire port spinlock held by the DMA
   callback.
4. DMA callback gives up spinlock after copying the data, but before
   restarting DMA.
5. UART ISR acquires the spin lock and reads the same DMA buffer because
   DMA has not been restarted yet.

The release of the spinlock during the DMA callback was introduced by
commit 9b88748b362c ("tty: serial: tegra: drop uart_port->lock before
calling tty_flip_buffer_push()") to fix a spinlock lock-up issue when
calling tty_flip_buffer_push(). However, since then commit a9c3f68f3cd8
("tty: Fix low_latency BUG") migrated tty_flip_buffer_push() to always
use a workqueue, allowing tty_flip_buffer_push() to be called from
within atomic sections. Therefore, we can remove the unlocking of the
spinlock from the DMA callback and UART ISR and this will ensure that
the race condition no longer occurs.

Reported-by: Christopher Freeman <cfreeman@...dia.com>
Signed-off-by: Jon Hunter <jonathanh@...dia.com>
---
 drivers/tty/serial/serial-tegra.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index cf0133ae762d..38b49f447bd7 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -607,9 +607,7 @@ static void tegra_uart_rx_dma_complete(void *args)
 
 	tegra_uart_handle_rx_pio(tup, port);
 	if (tty) {
-		spin_unlock_irqrestore(&u->lock, flags);
 		tty_flip_buffer_push(port);
-		spin_lock_irqsave(&u->lock, flags);
 		tty_kref_put(tty);
 	}
 	tegra_uart_start_rx_dma(tup);
@@ -622,13 +620,11 @@ done:
 	spin_unlock_irqrestore(&u->lock, flags);
 }
 
-static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup,
-		unsigned long *flags)
+static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup)
 {
 	struct dma_tx_state state;
 	struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port);
 	struct tty_port *port = &tup->uport.state->port;
-	struct uart_port *u = &tup->uport;
 	unsigned int count;
 
 	/* Deactivate flow control to stop sender */
@@ -645,9 +641,7 @@ static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup,
 
 	tegra_uart_handle_rx_pio(tup, port);
 	if (tty) {
-		spin_unlock_irqrestore(&u->lock, *flags);
 		tty_flip_buffer_push(port);
-		spin_lock_irqsave(&u->lock, *flags);
 		tty_kref_put(tty);
 	}
 	tegra_uart_start_rx_dma(tup);
@@ -714,7 +708,7 @@ static irqreturn_t tegra_uart_isr(int irq, void *data)
 		iir = tegra_uart_read(tup, UART_IIR);
 		if (iir & UART_IIR_NO_INT) {
 			if (is_rx_int) {
-				tegra_uart_handle_rx_dma(tup, &flags);
+				tegra_uart_handle_rx_dma(tup);
 				if (tup->rx_in_progress) {
 					ier = tup->ier_shadow;
 					ier |= (UART_IER_RLSI | UART_IER_RTOIE |
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ