| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <tip-e9849777d0e27cdd2902805be51da73e7c79578c@git.kernel.org>
Date: Sun, 11 Oct 2015 02:36:34 -0700
From: tip-bot for Thomas Gleixner <tipbot@...or.com>
To: linux-tip-commits@...r.kernel.org
Cc: dhdang@....com, mingo@...nel.org, jason@...edaemon.net,
marc.zyngier@....com, linux-kernel@...r.kernel.org, hpa@...or.com,
tglx@...utronix.de
Subject: [tip:irq/core] genirq: Add flag to force mask in disable_irq[
_nosync]()
Commit-ID: e9849777d0e27cdd2902805be51da73e7c79578c
Gitweb: http://git.kernel.org/tip/e9849777d0e27cdd2902805be51da73e7c79578c
Author: Thomas Gleixner <tglx@...utronix.de>
AuthorDate: Fri, 9 Oct 2015 23:28:58 +0200
Committer: Thomas Gleixner <tglx@...utronix.de>
CommitDate: Sun, 11 Oct 2015 11:33:42 +0200
genirq: Add flag to force mask in disable_irq[_nosync]()
If an irq chip does not implement the irq_disable callback, then we
use a lazy approach for disabling the interrupt. That means that the
interrupt is marked disabled, but the interrupt line is not
immediately masked in the interrupt chip. It only becomes masked if
the interrupt is raised while it's marked disabled. We use this to avoid
possibly expensive mask/unmask operations for common case operations.
Unfortunately there are devices which do not allow the interrupt to be
disabled easily at the device level. They are forced to use
disable_irq_nosync(). This can result in taking each interrupt twice.
Instead of enforcing the non lazy mode on all interrupts of a irq
chip, provide a settings flag, which can be set by the driver for that
particular interrupt line.
Reported-and-tested-by: Duc Dang <dhdang@....com>
Signed-off-by: Thomas Gleixner <tglx@...utronix.de>
Cc: Marc Zyngier <marc.zyngier@....com>
Cc: Jason Cooper <jason@...edaemon.net>
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1510092348370.6097@nanos
---
include/linux/irq.h | 4 +++-
kernel/irq/chip.c | 9 +++++++++
kernel/irq/manage.c | 1 +
kernel/irq/settings.h | 12 ++++++++++++
4 files changed, 25 insertions(+), 1 deletion(-)
diff --git a/include/linux/irq.h b/include/linux/irq.h
index ba72b60..3c1c967 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -72,6 +72,7 @@ enum irqchip_irq_state;
* IRQ_IS_POLLED - Always polled by another interrupt. Exclude
* it from the spurious interrupt detection
* mechanism and from core side polling.
+ * IRQ_DISABLE_UNLAZY - Disable lazy irq disable
*/
enum {
IRQ_TYPE_NONE = 0x00000000,
@@ -97,13 +98,14 @@ enum {
IRQ_NOTHREAD = (1 << 16),
IRQ_PER_CPU_DEVID = (1 << 17),
IRQ_IS_POLLED = (1 << 18),
+ IRQ_DISABLE_UNLAZY = (1 << 19),
};
#define IRQF_MODIFY_MASK \
(IRQ_TYPE_SENSE_MASK | IRQ_NOPROBE | IRQ_NOREQUEST | \
IRQ_NOAUTOEN | IRQ_MOVE_PCNTXT | IRQ_LEVEL | IRQ_NO_BALANCING | \
IRQ_PER_CPU | IRQ_NESTED_THREAD | IRQ_NOTHREAD | IRQ_PER_CPU_DEVID | \
- IRQ_IS_POLLED)
+ IRQ_IS_POLLED | IRQ_DISABLE_UNLAZY)
#define IRQ_NO_BALANCING_MASK (IRQ_PER_CPU | IRQ_NO_BALANCING)
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index 4aa00d3..1520645 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -241,6 +241,13 @@ void irq_enable(struct irq_desc *desc)
* disabled. If an interrupt happens, then the interrupt flow
* handler masks the line at the hardware level and marks it
* pending.
+ *
+ * If the interrupt chip does not implement the irq_disable callback,
+ * a driver can disable the lazy approach for a particular irq line by
+ * calling 'irq_set_status_flags(irq, IRQ_DISABLE_UNLAZY)'. This can
+ * be used for devices which cannot disable the interrupt at the
+ * device level under certain circumstances and have to use
+ * disable_irq[_nosync] instead.
*/
void irq_disable(struct irq_desc *desc)
{
@@ -248,6 +255,8 @@ void irq_disable(struct irq_desc *desc)
if (desc->irq_data.chip->irq_disable) {
desc->irq_data.chip->irq_disable(&desc->irq_data);
irq_state_set_masked(desc);
+ } else if (irq_settings_disable_unlazy(desc)) {
+ mask_irq(desc);
}
}
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 312f9cb..a71175f 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -1463,6 +1463,7 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id)
/* If this was the last handler, shut down the IRQ line: */
if (!desc->action) {
+ irq_settings_clr_disable_unlazy(desc);
irq_shutdown(desc);
irq_release_resources(desc);
}
diff --git a/kernel/irq/settings.h b/kernel/irq/settings.h
index 3320b84..320579d 100644
--- a/kernel/irq/settings.h
+++ b/kernel/irq/settings.h
@@ -15,6 +15,7 @@ enum {
_IRQ_NESTED_THREAD = IRQ_NESTED_THREAD,
_IRQ_PER_CPU_DEVID = IRQ_PER_CPU_DEVID,
_IRQ_IS_POLLED = IRQ_IS_POLLED,
+ _IRQ_DISABLE_UNLAZY = IRQ_DISABLE_UNLAZY,
_IRQF_MODIFY_MASK = IRQF_MODIFY_MASK,
};
@@ -28,6 +29,7 @@ enum {
#define IRQ_NESTED_THREAD GOT_YOU_MORON
#define IRQ_PER_CPU_DEVID GOT_YOU_MORON
#define IRQ_IS_POLLED GOT_YOU_MORON
+#define IRQ_DISABLE_UNLAZY GOT_YOU_MORON
#undef IRQF_MODIFY_MASK
#define IRQF_MODIFY_MASK GOT_YOU_MORON
@@ -154,3 +156,13 @@ static inline bool irq_settings_is_polled(struct irq_desc *desc)
{
return desc->status_use_accessors & _IRQ_IS_POLLED;
}
+
+static inline bool irq_settings_disable_unlazy(struct irq_desc *desc)
+{
+ return desc->status_use_accessors & _IRQ_DISABLE_UNLAZY;
+}
+
+static inline void irq_settings_clr_disable_unlazy(struct irq_desc *desc)
+{
+ desc->status_use_accessors &= ~_IRQ_DISABLE_UNLAZY;
+}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists