linux-kernel - [PATCH v3 0/5] arm64: Juno: Add support for PCIe on R1 board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1444644459-2780-1-git-send-email-Liviu.Dudau@arm.com>
Date:	Mon, 12 Oct 2015 11:07:34 +0100
From:	Liviu Dudau <Liviu.Dudau@....com>
To:	Will Deacon <will.deacon@....com>,
	Catalin Marinas <catalin.marinas@....com>,
	Bjorn Helgaas <bhelgaas@...gle.com>,
	Mark Rutland <mark.rutland@....com>,
	Linus Walleij <linus.walleij@...aro.org>,
	Robin Murphy <robin.murphy@....com>,
	Rob Herring <robh+dt@...nel.org>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Arnd Bergmann <arnd@...db.de>, Jon Medhurst <tixy@...aro.org>
Cc:	linux-pci <linux-pci@...r.kernel.org>,
	device-tree <devicetree@...r.kernel.org>,
	LAKML <linux-arm-kernel@...ts.infradead.org>,
	LKML <linux-kernel@...r.kernel.org>
Subject: [PATCH v3 0/5] arm64: Juno: Add support for PCIe on R1 board

Changes in v3 vs v2:
 - Add Documentation files describing the DT bindings for plda,xpressrich3-axi
   and arm,juno-r1-pcie properties.
 - Cosmetic changes in the .dts to bracket range and interrupt-map entries
   individually.
Changes in v2 vs v1:
 - Add plda as OF vendor prefix
 - Add more specific compatible values to the Juno R1 DT
 

Juno R1 board has a working PCIe host bridge that can be enabled and
configured by the firmware and made use of by Linux. For UEFI, the
Linaro releases contain firmware that configure the XpressRICH3 host
bridge correctly. For U-Boot based setups, one needs the patchset
posted here[1].

This patchset adds a quirk for setting the correct class to the host
bridge device and the device tree changes that enable PCIe on Juno R1.
We also update the defconfig to enable the generic PCI host bridge driver.

Best regards,
Liviu

1. http://lists.denx.de/pipermail/u-boot/2015-October/229669.html


Andrew Murray (1):
  pci: Add PLDA's XpressRICH3 PCIe host bridge PCI ID

Liviu Dudau (4):
  PCI: Add quirk for PLDA's XpressRICH3 host bridge class.
  Documentation: of: Document the bindings used by Juno R1 PCIe host bridge
  arm64: Juno: Add support for the PCIe host bridge on Juno R1
  arm64: defconfig: Enable PCI generic host bridge by default

 .../devicetree/bindings/pci/arm,juno-r1-pcie.txt     | 10 ++++++++++
 .../devicetree/bindings/pci/plda,xpressrich3-axi.txt | 12 ++++++++++++
 .../devicetree/bindings/vendor-prefixes.txt          |  1 +
 arch/arm64/boot/dts/arm/juno-r1.dts                  | 20 ++++++++++++++++++++
 arch/arm64/configs/defconfig                         |  1 +
 drivers/pci/quirks.c                                 | 10 ++++++++++
 include/linux/pci_ids.h                              |  3 +++
 7 files changed, 57 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt
 create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt

-- 
2.6.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/