[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1444729078-26585-2-git-send-email-chaotian.jing@mediatek.com>
Date: Tue, 13 Oct 2015 17:37:55 +0800
From: Chaotian Jing <chaotian.jing@...iatek.com>
To: Ulf Hansson <ulf.hansson@...aro.org>
CC: Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Hans de Goede <hdegoede@...hat.com>,
Lars-Peter Clausen <lars@...afoo.de>,
Javier Martinez Canillas <javier.martinez@...labora.co.uk>,
Sascha Hauer <s.hauer@...gutronix.de>,
Howard Chen <ibanezchen@...il.com>,
Daniel Kurtz <djkurtz@...omium.org>,
Adrian Hunter <adrian.hunter@...el.com>,
Kristina Martsenko <kristina.martsenko@...il.com>,
Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>, <linux-mmc@...r.kernel.org>,
<srv_heupstream@...iatek.com>,
Chaotian Jing <chaotian.jing@...iatek.com>
Subject: [PATCH 1/4] mmc: core: Add DT bindings for eMMC hardware reset support
Sometime only need set MMC_CAP_HW_RESET for one of MMC hosts,
So set it in device tree is better.
Signed-off-by: Chaotian Jing <chaotian.jing@...iatek.com>
---
Documentation/devicetree/bindings/mmc/mmc.txt | 1 +
drivers/mmc/core/host.c | 2 ++
2 files changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index 0384fc3..f693baf 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -37,6 +37,7 @@ Optional properties:
- sd-uhs-sdr104: SD UHS SDR104 speed is supported
- sd-uhs-ddr50: SD UHS DDR50 speed is supported
- cap-power-off-card: powering off the card is safe
+- cap-mmc-hw-reset: eMMC hardware reset is supported
- cap-sdio-irq: enable SDIO IRQ signalling on this interface
- full-pwr-cycle: full power cycle of the card is supported
- mmc-ddr-1_8v: eMMC high-speed DDR mode(1.8V I/O) is supported
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index abd933b..04fdc2f 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -507,6 +507,8 @@ int mmc_of_parse(struct mmc_host *host)
host->caps |= MMC_CAP_UHS_DDR50;
if (of_property_read_bool(np, "cap-power-off-card"))
host->caps |= MMC_CAP_POWER_OFF_CARD;
+ if (of_property_read_bool(np, "cap-mmc-hw-reset"))
+ host->caps |= MMC_CAP_HW_RESET;
if (of_property_read_bool(np, "cap-sdio-irq"))
host->caps |= MMC_CAP_SDIO_IRQ;
if (of_property_read_bool(np, "full-pwr-cycle"))
--
1.8.1.1.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists