| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20151014224003.GO15160@broadcom.com>
Date: Wed, 14 Oct 2015 18:40:04 -0400
From: Jon Mason <jonmason@...adcom.com>
To: Hauke Mehrtens <hauke@...ke-m.de>
CC: Kapil Hali <kapilh@...adcom.com>, Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
"Ian Campbell" <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Russell King <linux@....linux.org.uk>,
Ray Jui <rjui@...adcom.com>,
"Scott Branden" <sbranden@...adcom.com>,
Florian Fainelli <f.fainelli@...il.com>,
Gregory Fong <gregory.0xf0@...il.com>,
Lee Jones <lee@...nel.org>, "Heiko Stuebner" <heiko@...ech.de>,
Kever Yang <kever.yang@...k-chips.com>,
"Maxime Ripard" <maxime.ripard@...e-electrons.com>,
Olof Johansson <olof@...om.net>,
Paul Walmsley <paul@...an.com>,
Linus Walleij <linus.walleij@...aro.org>,
Chen-Yu Tsai <wens@...e.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
<bcm-kernel-feedback-list@...adcom.com>
Subject: Re: [PATCH 3/3] ARM: BCM: Add SMP support for Broadcom NSP
On Thu, Oct 15, 2015 at 12:26:25AM +0200, Hauke Mehrtens wrote:
> On 10/14/2015 07:47 PM, Kapil Hali wrote:
> > Add SMP support for Broadcom's Northstar Plus SoC,
> > cpu enable method and pen_release procedures. This
> > changes also consolidates iProc family's - BCM NSP
> > and BCM Kona, SMP handling in a common file.
>
> This will probably also work on normal Northstar CPUs without changes.
I think all that needs to be changed is adding to
arch/arm/boot/dts/bcm4708.dts
+ enable-method = "brcm,bcm-nsp-smp";
+ secondary-boot-reg = <0xffff0400>;
But I have not been able to confirm that yet.
Thanks,
Jon
>
> > Northstar Plus SoC is based on ARM Cortex-A9
> > revision r3p0 which requires configuration for ARM
> > Errata 764369 for SMP. This change adds the needed
> > configuration option.
> >
> > Signed-off-by: Kapil Hali <kapilh@...adcom.com>
> > ---
> > arch/arm/mach-bcm/Kconfig | 2 +
> > arch/arm/mach-bcm/Makefile | 8 +-
> > arch/arm/mach-bcm/bcm_nsp.h | 19 ++++
> > arch/arm/mach-bcm/headsmp.S | 37 ++++++++
> > arch/arm/mach-bcm/{kona_smp.c => platsmp.c} | 142 ++++++++++++++++++++++++++--
> > 5 files changed, 197 insertions(+), 11 deletions(-)
> > create mode 100644 arch/arm/mach-bcm/bcm_nsp.h
> > create mode 100644 arch/arm/mach-bcm/headsmp.S
> > rename arch/arm/mach-bcm/{kona_smp.c => platsmp.c} (63%)
> >
> > diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
> > index 1679fa4..2e9dbb5 100644
> > --- a/arch/arm/mach-bcm/Kconfig
> > +++ b/arch/arm/mach-bcm/Kconfig
> > @@ -40,6 +40,8 @@ config ARCH_BCM_NSP
> > select ARCH_BCM_IPROC
> > select ARM_ERRATA_754322
> > select ARM_ERRATA_775420
> > + select ARM_ERRATA_764369 if SMP
> > + select HAVE_SMP
> > help
> > Support for Broadcom Northstar Plus SoC.
> > Broadcom Northstar Plus family of SoCs are used for switching control
> > diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
> > index 892261f..36a4ca30 100644
> > --- a/arch/arm/mach-bcm/Makefile
> > +++ b/arch/arm/mach-bcm/Makefile
> > @@ -14,7 +14,11 @@
> > obj-$(CONFIG_ARCH_BCM_CYGNUS) += bcm_cygnus.o
> >
> > # Northstar Plus
> > -obj-$(CONFIG_ARCH_BCM_NSP) += bcm_nsp.o
> > +obj-$(CONFIG_ARCH_BCM_NSP) += bcm_nsp.o
> > +
> > +ifeq ($(CONFIG_ARCH_BCM_NSP),y)
> > +obj-$(CONFIG_SMP) += headsmp.o platsmp.o
> > +endif
> >
> > # BCM281XX
> > obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o
> > @@ -23,7 +27,7 @@ obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o
> > obj-$(CONFIG_ARCH_BCM_21664) += board_bcm21664.o
> >
> > # BCM281XX and BCM21664 SMP support
> > -obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += kona_smp.o
> > +obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += platsmp.o
> >
> > # BCM281XX and BCM21664 L2 cache control
> > obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
> > diff --git a/arch/arm/mach-bcm/bcm_nsp.h b/arch/arm/mach-bcm/bcm_nsp.h
> > new file mode 100644
> > index 0000000..58e1e80
> > --- /dev/null
> > +++ b/arch/arm/mach-bcm/bcm_nsp.h
> > @@ -0,0 +1,19 @@
> > +/*
> > + * Copyright (C) 2015 Broadcom Corporation
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation version 2.
> > + *
> > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> > + * kind, whether express or implied; without even the implied warranty
> > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#ifndef __BCM_NSP_H
> > +#define __BCM_NSP_H
> > +
> > +extern void nsp_secondary_startup(void);
> > +
> > +#endif /* __BCM_NSP_H */
> > diff --git a/arch/arm/mach-bcm/headsmp.S b/arch/arm/mach-bcm/headsmp.S
> > new file mode 100644
> > index 0000000..0da13b2
> > --- /dev/null
> > +++ b/arch/arm/mach-bcm/headsmp.S
> > @@ -0,0 +1,37 @@
> > +/*
> > + * Copyright (C) 2015 Broadcom Corporation
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation version 2.
> > + *
> > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> > + * kind, whether express or implied; without even the implied warranty
> > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/linkage.h>
> > +
> > +/*
> > + * iProc specific entry point for secondary CPUs. This provides
> > + * a "holding pen" into which all secondary cores are held until
> > + * we are ready for them to initialise.
> > + */
> > +ENTRY(nsp_secondary_startup)
> > + mrc p15, 0, r0, c0, c0, 5
> > + and r0, r0, #15
> > + adr r4, 1f
> > + ldmia r4, {r5, r6}
> > + sub r4, r4, r5
> > + add r6, r6, r4
> > +pen: ldr r7, [r6]
> > + cmp r7, r0
> > + bne pen
> > +
> > + b secondary_startup
> > +
> > +1: .long .
> > + .long pen_release
> > +
> > +ENDPROC(nsp_secondary_startup)
> > diff --git a/arch/arm/mach-bcm/kona_smp.c b/arch/arm/mach-bcm/platsmp.c
> > similarity index 63%
> > rename from arch/arm/mach-bcm/kona_smp.c
> > rename to arch/arm/mach-bcm/platsmp.c
> > index 66a0465..619030e 100644
> > --- a/arch/arm/mach-bcm/kona_smp.c
> > +++ b/arch/arm/mach-bcm/platsmp.c
> > @@ -1,5 +1,5 @@
> > /*
> > - * Copyright (C) 2014 Broadcom Corporation
> > + * Copyright (C) 2014-2015 Broadcom Corporation
> > * Copyright 2014 Linaro Limited
> > *
> > * This program is free software; you can redistribute it and/or
> > @@ -12,16 +12,23 @@
> > * GNU General Public License for more details.
> > */
> >
> > -#include <linux/init.h>
> > +#include <linux/cpumask.h>
> > +#include <linux/delay.h>
> > #include <linux/errno.h>
> > +#include <linux/init.h>
> > #include <linux/io.h>
> > +#include <linux/jiffies.h>
> > #include <linux/of.h>
> > #include <linux/sched.h>
> > +#include <linux/smp.h>
> >
> > +#include <asm/cacheflush.h>
> > #include <asm/smp.h>
> > #include <asm/smp_plat.h>
> > #include <asm/smp_scu.h>
> >
> > +#include "bcm_nsp.h"
> > +
> > /* Size of mapped Cortex A9 SCU address space */
> > #define CORTEX_A9_SCU_SIZE 0x58
> >
> > @@ -34,6 +41,24 @@
> > /* I/O address of register used to coordinate secondary core startup */
> > static u32 secondary_boot;
> >
> > +static DEFINE_SPINLOCK(boot_lock);
> > +
> > +/*
> > + * Write pen_release in a way that is guaranteed to be visible to all
> > + * observers, irrespective of whether they're taking part in coherency
> > + * or not. This is necessary for the hotplug code to work reliably.
> > + */
> > +static void write_pen_release(int val)
> > +{
> > + pen_release = val;
> > + /*
> > + * Ensure write to pen_release is visible to the other cores,
> > + * here - primary core
> > + */
> > + smp_wmb();
> > + sync_cache_w(&pen_release);
> > +}
> > +
> > /*
> > * Enable the Cortex A9 Snoop Control Unit
> > *
> > @@ -75,6 +100,51 @@ static int __init scu_a9_enable(void)
> > return 0;
> > }
> >
> > +static int nsp_write_lut(void (*secondary_startup) (void))
> > +{
> > + void __iomem *sku_rom_lut;
> > + phys_addr_t secondary_startup_phy;
> > +
> > + if (!secondary_boot) {
> > + pr_warn("required secondary boot register not specified\n");
> > + return -EINVAL;
> > + }
> > +
> > + sku_rom_lut = ioremap_nocache((phys_addr_t)secondary_boot,
> > + sizeof(secondary_boot));
> > + if (!sku_rom_lut) {
> > + pr_warn("unable to ioremap SKU-ROM LUT register\n");
> > + return -ENOMEM;
> > + }
> > +
> > + secondary_startup_phy = virt_to_phys(secondary_startup);
> > + BUG_ON(secondary_startup_phy > (phys_addr_t)U32_MAX);
> > +
> > + writel_relaxed(secondary_startup_phy, sku_rom_lut);
> > + /*
> > + * Ensure the write is visible to the secondary core.
> > + */
> > + smp_wmb();
> > +
> > + iounmap(sku_rom_lut);
> > +
> > + return 0;
> > +}
> > +
> > +static void nsp_secondary_init(unsigned int cpu)
> > +{
> > + /*
> > + * Let the primary cpu know we are out of holding pen.
> > + */
> > + write_pen_release(-1);
> > +
> > + /*
> > + * Synchronise with the boot thread.
> > + */
> > + spin_lock(&boot_lock);
> > + spin_unlock(&boot_lock);
> > +}
> > +
> > static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
> > {
> > static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
> > @@ -95,11 +165,11 @@ static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
> > /*
> > * Our secondary enable method requires a "secondary-boot-reg"
> > * property to specify a register address used to request the
> > - * ROM code boot a secondary code. If we have any trouble
> > + * ROM code boot a secondary core. If we have any trouble
> > * getting this we fall back to uniprocessor mode.
> > */
> > if (of_property_read_u32(node, OF_SECONDARY_BOOT, &secondary_boot)) {
> > - pr_err("%s: missing/invalid " OF_SECONDARY_BOOT " property\n",
> > + pr_warn("%s: missing/invalid " OF_SECONDARY_BOOT " property\n",
> > node->name);
> > ret = -ENOENT; /* Arrange to disable SMP */
> > goto out;
> > @@ -115,7 +185,6 @@ out:
> > of_node_put(node);
> > if (ret) {
> > /* Update the CPU present map to reflect uniprocessor mode */
> > - BUG_ON(ret != -ENOENT);
> > pr_warn("disabling SMP\n");
> > init_cpu_present(&only_cpu_0);
> > }
> > @@ -139,7 +208,7 @@ out:
> > * - Wait for the secondary boot register to be re-written, which
> > * indicates the secondary core has started.
> > */
> > -static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
> > +static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle)
> > {
> > void __iomem *boot_reg;
> > phys_addr_t boot_func;
> > @@ -162,7 +231,7 @@ static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
> > boot_reg = ioremap_nocache((phys_addr_t)secondary_boot, sizeof(u32));
> > if (!boot_reg) {
> > pr_err("unable to map boot register for cpu %u\n", cpu_id);
> > - return -ENOSYS;
> > + return -ENOMEM;
> > }
> >
> > /*
> > @@ -191,12 +260,67 @@ static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
> >
> > pr_err("timeout waiting for cpu %u to start\n", cpu_id);
> >
> > - return -ENOSYS;
> > + return -ENXIO;
> > +}
> > +
> > +static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle)
> > +{
> > + unsigned long timeout;
> > + int ret;
> > +
> > + /*
> > + * After wake up, secondary core branches to the startup
> > + * address programmed at SKU ROM LUT location.
> > + */
> > + ret = nsp_write_lut(nsp_secondary_startup);
> > + if (ret) {
> > + pr_err("unable to write startup addr to SKU ROM LUT\n");
> > + goto out;
> > + }
> > +
> > + /*
> > + * The secondary processor is waiting to be released from
> > + * the holding pen - release it, then wait for it to flag
> > + * that it has been released by resetting pen_release.
> > + */
> > + spin_lock(&boot_lock);
> > +
> > + write_pen_release(cpu_logical_map(cpu));
> > + /*
> > + * Send an Event to wake up the secondary core which is in
> > + * WFE state. Updated pen_release should also be visible to
> > + * the secondary core.
> > + */
> > + dsb_sev();
> > +
> > + timeout = jiffies + (1 * HZ);
> > + while (time_before(jiffies, timeout)) {
> > + /* Make sure loads on other CPU is visible */
> > + smp_rmb();
> > + if (pen_release == -1)
> > + break;
> > +
> > + udelay(10);
> > + }
> > +
> > + spin_unlock(&boot_lock);
>
> Why is this boot_lock needed? As far as I understand it asserts that
> both CPUs leave nsp_boot_secondary() and nsp_secondary_init() at the
> same time.
>
> > +
> > + ret = pen_release != -1 ? -ENXIO : 0;
> > +
> > +out:
> > + return ret;
> > }
> >
> > static struct smp_operations bcm_smp_ops __initdata = {
> > .smp_prepare_cpus = bcm_smp_prepare_cpus,
> > - .smp_boot_secondary = bcm_boot_secondary,
> > + .smp_boot_secondary = kona_boot_secondary,
> > };
> > CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
> > &bcm_smp_ops);
> > +
> > +struct smp_operations nsp_smp_ops __initdata = {
> > + .smp_prepare_cpus = bcm_smp_prepare_cpus,
> > + .smp_secondary_init = nsp_secondary_init,
> > + .smp_boot_secondary = nsp_boot_secondary,
> > +};
> > +CPU_METHOD_OF_DECLARE(bcm_smp_nsp, "brcm,bcm-nsp-smp", &nsp_smp_ops);
> >
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists