| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1444822986-20562-3-git-send-email-peter.ujfalusi@ti.com>
Date: Wed, 14 Oct 2015 14:42:44 +0300
From: Peter Ujfalusi <peter.ujfalusi@...com>
To: <vinod.koul@...el.com>, <nsekhar@...com>, <linux@....linux.org.uk>
CC: <olof@...om.net>, <arnd@...db.de>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-omap@...r.kernel.org>,
<dmaengine@...r.kernel.org>
Subject: [PATCH v5 02/24] ARM: common: edma: Remove unused functions
We no longer have users for these functions so they can be removed.
Remove also unused enums from the header file.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@...com>
---
arch/arm/common/edma.c | 376 -------------------------------------
include/linux/platform_data/edma.h | 33 ----
2 files changed, 409 deletions(-)
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index 56fc339571f9..e9c4cb16a47e 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -510,62 +510,6 @@ static irqreturn_t dma_ccerr_handler(int irq, void *data)
return IRQ_HANDLED;
}
-static int reserve_contiguous_slots(int ctlr, unsigned int id,
- unsigned int num_slots,
- unsigned int start_slot)
-{
- int i, j;
- unsigned int count = num_slots;
- int stop_slot = start_slot;
- DECLARE_BITMAP(tmp_inuse, EDMA_MAX_PARAMENTRY);
-
- for (i = start_slot; i < edma_cc[ctlr]->num_slots; ++i) {
- j = EDMA_CHAN_SLOT(i);
- if (!test_and_set_bit(j, edma_cc[ctlr]->edma_inuse)) {
- /* Record our current beginning slot */
- if (count == num_slots)
- stop_slot = i;
-
- count--;
- set_bit(j, tmp_inuse);
-
- if (count == 0)
- break;
- } else {
- clear_bit(j, tmp_inuse);
-
- if (id == EDMA_CONT_PARAMS_FIXED_EXACT) {
- stop_slot = i;
- break;
- } else {
- count = num_slots;
- }
- }
- }
-
- /*
- * We have to clear any bits that we set
- * if we run out parameter RAM slots, i.e we do find a set
- * of contiguous parameter RAM slots but do not find the exact number
- * requested as we may reach the total number of parameter RAM slots
- */
- if (i == edma_cc[ctlr]->num_slots)
- stop_slot = i;
-
- j = start_slot;
- for_each_set_bit_from(j, tmp_inuse, stop_slot)
- clear_bit(j, edma_cc[ctlr]->edma_inuse);
-
- if (count)
- return -EBUSY;
-
- for (j = i - num_slots + 1; j <= i; ++j)
- memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j),
- &dummy_paramset, PARM_SIZE);
-
- return EDMA_CTLR_CHAN(ctlr, i - num_slots + 1);
-}
-
static int prepare_unused_channel_list(struct device *dev, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
@@ -818,186 +762,11 @@ void edma_free_slot(unsigned slot)
}
EXPORT_SYMBOL(edma_free_slot);
-
-/**
- * edma_alloc_cont_slots- alloc contiguous parameter RAM slots
- * The API will return the starting point of a set of
- * contiguous parameter RAM slots that have been requested
- *
- * @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT
- * or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
- * @count: number of contiguous Paramter RAM slots
- * @slot - the start value of Parameter RAM slot that should be passed if id
- * is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
- *
- * If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of
- * contiguous Parameter RAM slots from parameter RAM 64 in the case of
- * DaVinci SOCs and 32 in the case of DA8xx SOCs.
- *
- * If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a
- * set of contiguous parameter RAM slots from the "slot" that is passed as an
- * argument to the API.
- *
- * If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries
- * starts looking for a set of contiguous parameter RAMs from the "slot"
- * that is passed as an argument to the API. On failure the API will try to
- * find a set of contiguous Parameter RAM slots from the remaining Parameter
- * RAM slots
- */
-int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
-{
- /*
- * The start slot requested should be greater than
- * the number of channels and lesser than the total number
- * of slots
- */
- if ((id != EDMA_CONT_PARAMS_ANY) &&
- (slot < edma_cc[ctlr]->num_channels ||
- slot >= edma_cc[ctlr]->num_slots))
- return -EINVAL;
-
- /*
- * The number of parameter RAM slots requested cannot be less than 1
- * and cannot be more than the number of slots minus the number of
- * channels
- */
- if (count < 1 || count >
- (edma_cc[ctlr]->num_slots - edma_cc[ctlr]->num_channels))
- return -EINVAL;
-
- switch (id) {
- case EDMA_CONT_PARAMS_ANY:
- return reserve_contiguous_slots(ctlr, id, count,
- edma_cc[ctlr]->num_channels);
- case EDMA_CONT_PARAMS_FIXED_EXACT:
- case EDMA_CONT_PARAMS_FIXED_NOT_EXACT:
- return reserve_contiguous_slots(ctlr, id, count, slot);
- default:
- return -EINVAL;
- }
-
-}
-EXPORT_SYMBOL(edma_alloc_cont_slots);
-
-/**
- * edma_free_cont_slots - deallocate DMA parameter RAM slots
- * @slot: first parameter RAM of a set of parameter RAM slots to be freed
- * @count: the number of contiguous parameter RAM slots to be freed
- *
- * This deallocates the parameter RAM slots allocated by
- * edma_alloc_cont_slots.
- * Callers/applications need to keep track of sets of contiguous
- * parameter RAM slots that have been allocated using the edma_alloc_cont_slots
- * API.
- * Callers are responsible for ensuring the slots are inactive, and will
- * not be activated.
- */
-int edma_free_cont_slots(unsigned slot, int count)
-{
- unsigned ctlr, slot_to_free;
- int i;
-
- ctlr = EDMA_CTLR(slot);
- slot = EDMA_CHAN_SLOT(slot);
-
- if (slot < edma_cc[ctlr]->num_channels ||
- slot >= edma_cc[ctlr]->num_slots ||
- count < 1)
- return -EINVAL;
-
- for (i = slot; i < slot + count; ++i) {
- ctlr = EDMA_CTLR(i);
- slot_to_free = EDMA_CHAN_SLOT(i);
-
- memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot_to_free),
- &dummy_paramset, PARM_SIZE);
- clear_bit(slot_to_free, edma_cc[ctlr]->edma_inuse);
- }
-
- return 0;
-}
-EXPORT_SYMBOL(edma_free_cont_slots);
-
/*-----------------------------------------------------------------------*/
/* Parameter RAM operations (i) -- read/write partial slots */
/**
- * edma_set_src - set initial DMA source address in parameter RAM slot
- * @slot: parameter RAM slot being configured
- * @src_port: physical address of source (memory, controller FIFO, etc)
- * @addressMode: INCR, except in very rare cases
- * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
- * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
- *
- * Note that the source address is modified during the DMA transfer
- * according to edma_set_src_index().
- */
-void edma_set_src(unsigned slot, dma_addr_t src_port,
- enum address_mode mode, enum fifo_width width)
-{
- unsigned ctlr;
-
- ctlr = EDMA_CTLR(slot);
- slot = EDMA_CHAN_SLOT(slot);
-
- if (slot < edma_cc[ctlr]->num_slots) {
- unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
-
- if (mode) {
- /* set SAM and program FWID */
- i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8));
- } else {
- /* clear SAM */
- i &= ~SAM;
- }
- edma_parm_write(ctlr, PARM_OPT, slot, i);
-
- /* set the source port address
- in source register of param structure */
- edma_parm_write(ctlr, PARM_SRC, slot, src_port);
- }
-}
-EXPORT_SYMBOL(edma_set_src);
-
-/**
- * edma_set_dest - set initial DMA destination address in parameter RAM slot
- * @slot: parameter RAM slot being configured
- * @dest_port: physical address of destination (memory, controller FIFO, etc)
- * @addressMode: INCR, except in very rare cases
- * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
- * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
- *
- * Note that the destination address is modified during the DMA transfer
- * according to edma_set_dest_index().
- */
-void edma_set_dest(unsigned slot, dma_addr_t dest_port,
- enum address_mode mode, enum fifo_width width)
-{
- unsigned ctlr;
-
- ctlr = EDMA_CTLR(slot);
- slot = EDMA_CHAN_SLOT(slot);
-
- if (slot < edma_cc[ctlr]->num_slots) {
- unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
-
- if (mode) {
- /* set DAM and program FWID */
- i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8));
- } else {
- /* clear DAM */
- i &= ~DAM;
- }
- edma_parm_write(ctlr, PARM_OPT, slot, i);
- /* set the destination port address
- in dest register of param structure */
- edma_parm_write(ctlr, PARM_DST, slot, dest_port);
- }
-}
-EXPORT_SYMBOL(edma_set_dest);
-
-/**
* edma_get_position - returns the current transfer point
* @slot: parameter RAM slot being examined
* @dst: true selects the dest position, false the source
@@ -1017,110 +786,6 @@ dma_addr_t edma_get_position(unsigned slot, bool dst)
}
/**
- * edma_set_src_index - configure DMA source address indexing
- * @slot: parameter RAM slot being configured
- * @src_bidx: byte offset between source arrays in a frame
- * @src_cidx: byte offset between source frames in a block
- *
- * Offsets are specified to support either contiguous or discontiguous
- * memory transfers, or repeated access to a hardware register, as needed.
- * When accessing hardware registers, both offsets are normally zero.
- */
-void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx)
-{
- unsigned ctlr;
-
- ctlr = EDMA_CTLR(slot);
- slot = EDMA_CHAN_SLOT(slot);
-
- if (slot < edma_cc[ctlr]->num_slots) {
- edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
- 0xffff0000, src_bidx);
- edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
- 0xffff0000, src_cidx);
- }
-}
-EXPORT_SYMBOL(edma_set_src_index);
-
-/**
- * edma_set_dest_index - configure DMA destination address indexing
- * @slot: parameter RAM slot being configured
- * @dest_bidx: byte offset between destination arrays in a frame
- * @dest_cidx: byte offset between destination frames in a block
- *
- * Offsets are specified to support either contiguous or discontiguous
- * memory transfers, or repeated access to a hardware register, as needed.
- * When accessing hardware registers, both offsets are normally zero.
- */
-void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx)
-{
- unsigned ctlr;
-
- ctlr = EDMA_CTLR(slot);
- slot = EDMA_CHAN_SLOT(slot);
-
- if (slot < edma_cc[ctlr]->num_slots) {
- edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
- 0x0000ffff, dest_bidx << 16);
- edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
- 0x0000ffff, dest_cidx << 16);
- }
-}
-EXPORT_SYMBOL(edma_set_dest_index);
-
-/**
- * edma_set_transfer_params - configure DMA transfer parameters
- * @slot: parameter RAM slot being configured
- * @acnt: how many bytes per array (at least one)
- * @bcnt: how many arrays per frame (at least one)
- * @ccnt: how many frames per block (at least one)
- * @bcnt_rld: used only for A-Synchronized transfers; this specifies
- * the value to reload into bcnt when it decrements to zero
- * @sync_mode: ASYNC or ABSYNC
- *
- * See the EDMA3 documentation to understand how to configure and link
- * transfers using the fields in PaRAM slots. If you are not doing it
- * all at once with edma_write_slot(), you will use this routine
- * plus two calls each for source and destination, setting the initial
- * address and saying how to index that address.
- *
- * An example of an A-Synchronized transfer is a serial link using a
- * single word shift register. In that case, @acnt would be equal to
- * that word size; the serial controller issues a DMA synchronization
- * event to transfer each word, and memory access by the DMA transfer
- * controller will be word-at-a-time.
- *
- * An example of an AB-Synchronized transfer is a device using a FIFO.
- * In that case, @acnt equals the FIFO width and @bcnt equals its depth.
- * The controller with the FIFO issues DMA synchronization events when
- * the FIFO threshold is reached, and the DMA transfer controller will
- * transfer one frame to (or from) the FIFO. It will probably use
- * efficient burst modes to access memory.
- */
-void edma_set_transfer_params(unsigned slot,
- u16 acnt, u16 bcnt, u16 ccnt,
- u16 bcnt_rld, enum sync_dimension sync_mode)
-{
- unsigned ctlr;
-
- ctlr = EDMA_CTLR(slot);
- slot = EDMA_CHAN_SLOT(slot);
-
- if (slot < edma_cc[ctlr]->num_slots) {
- edma_parm_modify(ctlr, PARM_LINK_BCNTRLD, slot,
- 0x0000ffff, bcnt_rld << 16);
- if (sync_mode == ASYNC)
- edma_parm_and(ctlr, PARM_OPT, slot, ~SYNCDIM);
- else
- edma_parm_or(ctlr, PARM_OPT, slot, SYNCDIM);
- /* Set the acount, bcount, ccount registers */
- edma_parm_write(ctlr, PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
- edma_parm_write(ctlr, PARM_CCNT, slot, ccnt);
- }
-}
-EXPORT_SYMBOL(edma_set_transfer_params);
-
-/**
* edma_link - link one parameter RAM slot to another
* @from: parameter RAM slot originating the link
* @to: parameter RAM slot which is the link target
@@ -1145,26 +810,6 @@ void edma_link(unsigned from, unsigned to)
}
EXPORT_SYMBOL(edma_link);
-/**
- * edma_unlink - cut link from one parameter RAM slot
- * @from: parameter RAM slot originating the link
- *
- * The originating slot should not be part of any active DMA transfer.
- * Its link is set to 0xffff.
- */
-void edma_unlink(unsigned from)
-{
- unsigned ctlr;
-
- ctlr = EDMA_CTLR(from);
- from = EDMA_CHAN_SLOT(from);
-
- if (from >= edma_cc[ctlr]->num_slots)
- return;
- edma_parm_or(ctlr, PARM_LINK_BCNTRLD, from, 0xffff);
-}
-EXPORT_SYMBOL(edma_unlink);
-
/*-----------------------------------------------------------------------*/
/* Parameter RAM operations (ii) -- read/write whole parameter sets */
@@ -1402,27 +1047,6 @@ void edma_clean_channel(unsigned channel)
EXPORT_SYMBOL(edma_clean_channel);
/*
- * edma_clear_event - clear an outstanding event on the DMA channel
- * Arguments:
- * channel - channel number
- */
-void edma_clear_event(unsigned channel)
-{
- unsigned ctlr;
-
- ctlr = EDMA_CTLR(channel);
- channel = EDMA_CHAN_SLOT(channel);
-
- if (channel >= edma_cc[ctlr]->num_channels)
- return;
- if (channel < 32)
- edma_write(ctlr, EDMA_ECR, BIT(channel));
- else
- edma_write(ctlr, EDMA_ECRH, BIT(channel - 32));
-}
-EXPORT_SYMBOL(edma_clear_event);
-
-/*
* edma_assign_channel_eventq - move given channel to desired eventq
* Arguments:
* channel - channel number
diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
index bdb2710e2aab..c1862423b356 100644
--- a/include/linux/platform_data/edma.h
+++ b/include/linux/platform_data/edma.h
@@ -72,20 +72,6 @@ struct edmacc_param {
#define EDMA_DMA_TC1_ERROR 3
#define EDMA_DMA_TC2_ERROR 4
-enum address_mode {
- INCR = 0,
- FIFO = 1
-};
-
-enum fifo_width {
- W8BIT = 0,
- W16BIT = 1,
- W32BIT = 2,
- W64BIT = 3,
- W128BIT = 4,
- W256BIT = 5
-};
-
enum dma_event_q {
EVENTQ_0 = 0,
EVENTQ_1 = 1,
@@ -94,11 +80,6 @@ enum dma_event_q {
EVENTQ_DEFAULT = -1
};
-enum sync_dimension {
- ASYNC = 0,
- ABSYNC = 1
-};
-
#define EDMA_CTLR_CHAN(ctlr, chan) (((ctlr) << 16) | (chan))
#define EDMA_CTLR(i) ((i) >> 16)
#define EDMA_CHAN_SLOT(i) ((i) & 0xffff)
@@ -121,22 +102,9 @@ void edma_free_channel(unsigned channel);
int edma_alloc_slot(unsigned ctlr, int slot);
void edma_free_slot(unsigned slot);
-/* alloc/free a set of contiguous parameter RAM slots */
-int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count);
-int edma_free_cont_slots(unsigned slot, int count);
-
/* calls that operate on part of a parameter RAM slot */
-void edma_set_src(unsigned slot, dma_addr_t src_port,
- enum address_mode mode, enum fifo_width);
-void edma_set_dest(unsigned slot, dma_addr_t dest_port,
- enum address_mode mode, enum fifo_width);
dma_addr_t edma_get_position(unsigned slot, bool dst);
-void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
-void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
-void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
- u16 bcnt_rld, enum sync_dimension sync_mode);
void edma_link(unsigned from, unsigned to);
-void edma_unlink(unsigned from);
/* calls that operate on an entire parameter RAM slot */
void edma_write_slot(unsigned slot, const struct edmacc_param *params);
@@ -146,7 +114,6 @@ void edma_read_slot(unsigned slot, struct edmacc_param *params);
int edma_start(unsigned channel);
void edma_stop(unsigned channel);
void edma_clean_channel(unsigned channel);
-void edma_clear_event(unsigned channel);
void edma_pause(unsigned channel);
void edma_resume(unsigned channel);
--
2.6.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists