| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 15 Oct 2015 15:48:25 -0400
From: Jon Mason <jonmason@...adcom.com>
To: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>
CC: Florian Fainelli <f.fainelli@...il.com>,
Hauke Mehrtens <hauke@...ke-m.de>, Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
<linux-clk@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
<bcm-kernel-feedback-list@...adcom.com>
Subject: [PATCH v3 02/10] clk: cygnus: Convert all macros to all caps
The macros that are being used to initialize the values of the clk
structures should be all caps. Find and replace all of them with their
relevant counterparts.
Signed-off-by: Jon Mason <jonmason@...adcom.com>
---
drivers/clk/bcm/clk-cygnus.c | 146 +++++++++++++++++++++----------------------
1 file changed, 73 insertions(+), 73 deletions(-)
diff --git a/drivers/clk/bcm/clk-cygnus.c b/drivers/clk/bcm/clk-cygnus.c
index 316c603..aac82c6 100644
--- a/drivers/clk/bcm/clk-cygnus.c
+++ b/drivers/clk/bcm/clk-cygnus.c
@@ -23,28 +23,28 @@
#include <dt-bindings/clock/bcm-cygnus.h>
#include "clk-iproc.h"
-#define reg_val(o, s, w) { .offset = o, .shift = s, .width = w, }
+#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
-#define aon_val(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
+#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
.pwr_shift = ps, .iso_shift = is }
-#define sw_ctrl_val(o, s) { .offset = o, .shift = s, }
+#define SW_CTRL_VAL(o, s) { .offset = o, .shift = s, }
-#define asiu_div_val(o, es, hs, hw, ls, lw) \
+#define ASIU_DIV_VAL(o, es, hs, hw, ls, lw) \
{ .offset = o, .en_shift = es, .high_shift = hs, \
.high_width = hw, .low_shift = ls, .low_width = lw }
-#define reset_val(o, rs, prs, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \
+#define RESET_VAL(o, rs, prs, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \
.reset_shift = rs, .p_reset_shift = prs, .ki_shift = kis, \
.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
.ka_width = kaw }
-#define vco_ctrl_val(uo, lo) { .u_offset = uo, .l_offset = lo }
+#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
-#define enable_val(o, es, hs, bs) { .offset = o, .enable_shift = es, \
+#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
.hold_shift = hs, .bypass_shift = bs }
-#define asiu_gate_val(o, es) { .offset = o, .en_shift = es }
+#define ASIU_GATE_VAL(o, es) { .offset = o, .en_shift = es }
static void __init cygnus_armpll_init(struct device_node *node)
{
@@ -55,52 +55,52 @@ CLK_OF_DECLARE(cygnus_armpll, "brcm,cygnus-armpll", cygnus_armpll_init);
static const struct iproc_pll_ctrl genpll = {
.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
IPROC_CLK_PLL_NEEDS_SW_CFG,
- .aon = aon_val(0x0, 2, 1, 0),
- .reset = reset_val(0x0, 11, 10, 4, 3, 0, 4, 7, 3),
- .sw_ctrl = sw_ctrl_val(0x10, 31),
- .ndiv_int = reg_val(0x10, 20, 10),
- .ndiv_frac = reg_val(0x10, 0, 20),
- .pdiv = reg_val(0x14, 0, 4),
- .vco_ctrl = vco_ctrl_val(0x18, 0x1c),
- .status = reg_val(0x28, 12, 1),
+ .aon = AON_VAL(0x0, 2, 1, 0),
+ .reset = RESET_VAL(0x0, 11, 10, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .vco_ctrl = VCO_CTRL_VAL(0x18, 0x1c),
+ .status = REG_VAL(0x28, 12, 1),
};
static const struct iproc_clk_ctrl genpll_clk[] = {
[BCM_CYGNUS_GENPLL_AXI21_CLK] = {
.channel = BCM_CYGNUS_GENPLL_AXI21_CLK,
.flags = IPROC_CLK_AON,
- .enable = enable_val(0x4, 6, 0, 12),
- .mdiv = reg_val(0x20, 0, 8),
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x20, 0, 8),
},
[BCM_CYGNUS_GENPLL_250MHZ_CLK] = {
.channel = BCM_CYGNUS_GENPLL_250MHZ_CLK,
.flags = IPROC_CLK_AON,
- .enable = enable_val(0x4, 7, 1, 13),
- .mdiv = reg_val(0x20, 10, 8),
+ .enable = ENABLE_VAL(0x4, 7, 1, 13),
+ .mdiv = REG_VAL(0x20, 10, 8),
},
[BCM_CYGNUS_GENPLL_IHOST_SYS_CLK] = {
.channel = BCM_CYGNUS_GENPLL_IHOST_SYS_CLK,
.flags = IPROC_CLK_AON,
- .enable = enable_val(0x4, 8, 2, 14),
- .mdiv = reg_val(0x20, 20, 8),
+ .enable = ENABLE_VAL(0x4, 8, 2, 14),
+ .mdiv = REG_VAL(0x20, 20, 8),
},
[BCM_CYGNUS_GENPLL_ENET_SW_CLK] = {
.channel = BCM_CYGNUS_GENPLL_ENET_SW_CLK,
.flags = IPROC_CLK_AON,
- .enable = enable_val(0x4, 9, 3, 15),
- .mdiv = reg_val(0x24, 0, 8),
+ .enable = ENABLE_VAL(0x4, 9, 3, 15),
+ .mdiv = REG_VAL(0x24, 0, 8),
},
[BCM_CYGNUS_GENPLL_AUDIO_125_CLK] = {
.channel = BCM_CYGNUS_GENPLL_AUDIO_125_CLK,
.flags = IPROC_CLK_AON,
- .enable = enable_val(0x4, 10, 4, 16),
- .mdiv = reg_val(0x24, 10, 8),
+ .enable = ENABLE_VAL(0x4, 10, 4, 16),
+ .mdiv = REG_VAL(0x24, 10, 8),
},
[BCM_CYGNUS_GENPLL_CAN_CLK] = {
.channel = BCM_CYGNUS_GENPLL_CAN_CLK,
.flags = IPROC_CLK_AON,
- .enable = enable_val(0x4, 11, 5, 17),
- .mdiv = reg_val(0x24, 20, 8),
+ .enable = ENABLE_VAL(0x4, 11, 5, 17),
+ .mdiv = REG_VAL(0x24, 20, 8),
},
};
@@ -113,51 +113,51 @@ CLK_OF_DECLARE(cygnus_genpll, "brcm,cygnus-genpll", cygnus_genpll_clk_init);
static const struct iproc_pll_ctrl lcpll0 = {
.flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
- .aon = aon_val(0x0, 2, 5, 4),
- .reset = reset_val(0x0, 31, 30, 27, 3, 23, 4, 19, 4),
- .sw_ctrl = sw_ctrl_val(0x4, 31),
- .ndiv_int = reg_val(0x4, 16, 10),
- .pdiv = reg_val(0x4, 26, 4),
- .vco_ctrl = vco_ctrl_val(0x10, 0x14),
- .status = reg_val(0x18, 12, 1),
+ .aon = AON_VAL(0x0, 2, 5, 4),
+ .reset = RESET_VAL(0x0, 31, 30, 27, 3, 23, 4, 19, 4),
+ .sw_ctrl = SW_CTRL_VAL(0x4, 31),
+ .ndiv_int = REG_VAL(0x4, 16, 10),
+ .pdiv = REG_VAL(0x4, 26, 4),
+ .vco_ctrl = VCO_CTRL_VAL(0x10, 0x14),
+ .status = REG_VAL(0x18, 12, 1),
};
static const struct iproc_clk_ctrl lcpll0_clk[] = {
[BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK] = {
.channel = BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK,
.flags = IPROC_CLK_AON,
- .enable = enable_val(0x0, 7, 1, 13),
- .mdiv = reg_val(0x8, 0, 8),
+ .enable = ENABLE_VAL(0x0, 7, 1, 13),
+ .mdiv = REG_VAL(0x8, 0, 8),
},
[BCM_CYGNUS_LCPLL0_DDR_PHY_CLK] = {
.channel = BCM_CYGNUS_LCPLL0_DDR_PHY_CLK,
.flags = IPROC_CLK_AON,
- .enable = enable_val(0x0, 8, 2, 14),
- .mdiv = reg_val(0x8, 10, 8),
+ .enable = ENABLE_VAL(0x0, 8, 2, 14),
+ .mdiv = REG_VAL(0x8, 10, 8),
},
[BCM_CYGNUS_LCPLL0_SDIO_CLK] = {
.channel = BCM_CYGNUS_LCPLL0_SDIO_CLK,
.flags = IPROC_CLK_AON,
- .enable = enable_val(0x0, 9, 3, 15),
- .mdiv = reg_val(0x8, 20, 8),
+ .enable = ENABLE_VAL(0x0, 9, 3, 15),
+ .mdiv = REG_VAL(0x8, 20, 8),
},
[BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK] = {
.channel = BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK,
.flags = IPROC_CLK_AON,
- .enable = enable_val(0x0, 10, 4, 16),
- .mdiv = reg_val(0xc, 0, 8),
+ .enable = ENABLE_VAL(0x0, 10, 4, 16),
+ .mdiv = REG_VAL(0xc, 0, 8),
},
[BCM_CYGNUS_LCPLL0_SMART_CARD_CLK] = {
.channel = BCM_CYGNUS_LCPLL0_SMART_CARD_CLK,
.flags = IPROC_CLK_AON,
- .enable = enable_val(0x0, 11, 5, 17),
- .mdiv = reg_val(0xc, 10, 8),
+ .enable = ENABLE_VAL(0x0, 11, 5, 17),
+ .mdiv = REG_VAL(0xc, 10, 8),
},
[BCM_CYGNUS_LCPLL0_CH5_UNUSED] = {
.channel = BCM_CYGNUS_LCPLL0_CH5_UNUSED,
.flags = IPROC_CLK_AON,
- .enable = enable_val(0x0, 12, 6, 18),
- .mdiv = reg_val(0xc, 20, 8),
+ .enable = ENABLE_VAL(0x0, 12, 6, 18),
+ .mdiv = REG_VAL(0xc, 20, 8),
},
};
@@ -189,52 +189,52 @@ static const struct iproc_pll_vco_param mipipll_vco_params[] = {
static const struct iproc_pll_ctrl mipipll = {
.flags = IPROC_CLK_PLL_ASIU | IPROC_CLK_PLL_HAS_NDIV_FRAC |
IPROC_CLK_NEEDS_READ_BACK,
- .aon = aon_val(0x0, 4, 17, 16),
- .asiu = asiu_gate_val(0x0, 3),
- .reset = reset_val(0x0, 11, 10, 4, 3, 0, 4, 7, 4),
- .ndiv_int = reg_val(0x10, 20, 10),
- .ndiv_frac = reg_val(0x10, 0, 20),
- .pdiv = reg_val(0x14, 0, 4),
- .vco_ctrl = vco_ctrl_val(0x18, 0x1c),
- .status = reg_val(0x28, 12, 1),
+ .aon = AON_VAL(0x0, 4, 17, 16),
+ .asiu = ASIU_GATE_VAL(0x0, 3),
+ .reset = RESET_VAL(0x0, 11, 10, 4, 3, 0, 4, 7, 4),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .vco_ctrl = VCO_CTRL_VAL(0x18, 0x1c),
+ .status = REG_VAL(0x28, 12, 1),
};
static const struct iproc_clk_ctrl mipipll_clk[] = {
[BCM_CYGNUS_MIPIPLL_CH0_UNUSED] = {
.channel = BCM_CYGNUS_MIPIPLL_CH0_UNUSED,
.flags = IPROC_CLK_NEEDS_READ_BACK,
- .enable = enable_val(0x4, 12, 6, 18),
- .mdiv = reg_val(0x20, 0, 8),
+ .enable = ENABLE_VAL(0x4, 12, 6, 18),
+ .mdiv = REG_VAL(0x20, 0, 8),
},
[BCM_CYGNUS_MIPIPLL_CH1_LCD] = {
.channel = BCM_CYGNUS_MIPIPLL_CH1_LCD,
.flags = IPROC_CLK_NEEDS_READ_BACK,
- .enable = enable_val(0x4, 13, 7, 19),
- .mdiv = reg_val(0x20, 10, 8),
+ .enable = ENABLE_VAL(0x4, 13, 7, 19),
+ .mdiv = REG_VAL(0x20, 10, 8),
},
[BCM_CYGNUS_MIPIPLL_CH2_V3D] = {
.channel = BCM_CYGNUS_MIPIPLL_CH2_V3D,
.flags = IPROC_CLK_NEEDS_READ_BACK,
- .enable = enable_val(0x4, 14, 8, 20),
- .mdiv = reg_val(0x20, 20, 8),
+ .enable = ENABLE_VAL(0x4, 14, 8, 20),
+ .mdiv = REG_VAL(0x20, 20, 8),
},
[BCM_CYGNUS_MIPIPLL_CH3_UNUSED] = {
.channel = BCM_CYGNUS_MIPIPLL_CH3_UNUSED,
.flags = IPROC_CLK_NEEDS_READ_BACK,
- .enable = enable_val(0x4, 15, 9, 21),
- .mdiv = reg_val(0x24, 0, 8),
+ .enable = ENABLE_VAL(0x4, 15, 9, 21),
+ .mdiv = REG_VAL(0x24, 0, 8),
},
[BCM_CYGNUS_MIPIPLL_CH4_UNUSED] = {
.channel = BCM_CYGNUS_MIPIPLL_CH4_UNUSED,
.flags = IPROC_CLK_NEEDS_READ_BACK,
- .enable = enable_val(0x4, 16, 10, 22),
- .mdiv = reg_val(0x24, 10, 8),
+ .enable = ENABLE_VAL(0x4, 16, 10, 22),
+ .mdiv = REG_VAL(0x24, 10, 8),
},
[BCM_CYGNUS_MIPIPLL_CH5_UNUSED] = {
.channel = BCM_CYGNUS_MIPIPLL_CH5_UNUSED,
.flags = IPROC_CLK_NEEDS_READ_BACK,
- .enable = enable_val(0x4, 17, 11, 23),
- .mdiv = reg_val(0x24, 20, 8),
+ .enable = ENABLE_VAL(0x4, 17, 11, 23),
+ .mdiv = REG_VAL(0x24, 20, 8),
},
};
@@ -247,15 +247,15 @@ static void __init cygnus_mipipll_clk_init(struct device_node *node)
CLK_OF_DECLARE(cygnus_mipipll, "brcm,cygnus-mipipll", cygnus_mipipll_clk_init);
static const struct iproc_asiu_div asiu_div[] = {
- [BCM_CYGNUS_ASIU_KEYPAD_CLK] = asiu_div_val(0x0, 31, 16, 10, 0, 10),
- [BCM_CYGNUS_ASIU_ADC_CLK] = asiu_div_val(0x4, 31, 16, 10, 0, 10),
- [BCM_CYGNUS_ASIU_PWM_CLK] = asiu_div_val(0x8, 31, 16, 10, 0, 10),
+ [BCM_CYGNUS_ASIU_KEYPAD_CLK] = ASIU_DIV_VAL(0x0, 31, 16, 10, 0, 10),
+ [BCM_CYGNUS_ASIU_ADC_CLK] = ASIU_DIV_VAL(0x4, 31, 16, 10, 0, 10),
+ [BCM_CYGNUS_ASIU_PWM_CLK] = ASIU_DIV_VAL(0x8, 31, 16, 10, 0, 10),
};
static const struct iproc_asiu_gate asiu_gate[] = {
- [BCM_CYGNUS_ASIU_KEYPAD_CLK] = asiu_gate_val(0x0, 7),
- [BCM_CYGNUS_ASIU_ADC_CLK] = asiu_gate_val(0x0, 9),
- [BCM_CYGNUS_ASIU_PWM_CLK] = asiu_gate_val(IPROC_CLK_INVALID_OFFSET, 0),
+ [BCM_CYGNUS_ASIU_KEYPAD_CLK] = ASIU_GATE_VAL(0x0, 7),
+ [BCM_CYGNUS_ASIU_ADC_CLK] = ASIU_GATE_VAL(0x0, 9),
+ [BCM_CYGNUS_ASIU_PWM_CLK] = ASIU_GATE_VAL(IPROC_CLK_INVALID_OFFSET, 0),
};
static void __init cygnus_asiu_init(struct device_node *node)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists