| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 16 Oct 2015 15:09:19 +0900
From: Ingi Kim <ingi2.kim@...sung.com>
To: Jacek Anaszewski <j.anaszewski@...sung.com>
Cc: robh+dt@...nel.org, pawel.moll@....com, mark.rutland@....com,
ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
sameo@...ux.intel.com, lee.jones@...aro.org, rpurdie@...ys.net,
inki.dae@...sung.com, sw0312.kim@...sung.com,
beomho.seo@...sung.com, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-leds@...r.kernel.org
Subject: Re: [PATCH v2 3/3] leds: rt5033: Add RT5033 Flash led device driver
Hi Jacek,
Sorry I'm late :(
I'll send version3 patch soon
On 2015년 10월 13일 17:53, Jacek Anaszewski wrote:
> Hi Ingi,
>
> On 10/13/2015 04:58 AM, Ingi Kim wrote:
>> Hi Jacek,
>>
>> Thanks for your kind comments
>> I also append reply below
>>
>> On 2015년 10월 13일 00:10, Jacek Anaszewski wrote:
>>> Hi Ingi,
>>>
>>> Thanks for the update. Few comments below.
>>>
>>> On 10/12/2015 03:12 PM, Ingi Kim wrote:
>>>> This patch adds device driver of Richtek RT5033 PMIC.
>>>> The driver supports a current regulated output to drive
>>>> white LEDs for camera flash.
>>>>
>>>> Signed-off-by: Ingi Kim <ingi2.kim@...sung.com>
>>>> ---
>>>> drivers/leds/Kconfig | 8 ++
>>>> drivers/leds/Makefile | 1 +
>>>> drivers/leds/leds-rt5033.c | 223 +++++++++++++++++++++++++++++++++++++
>>>> include/linux/mfd/rt5033-private.h | 49 ++++++++
>>>> include/linux/mfd/rt5033.h | 22 +++-
>>>> 5 files changed, 301 insertions(+), 2 deletions(-)
>>>> create mode 100644 drivers/leds/leds-rt5033.c
>>>>
>>>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>>>> index 42990f2..29613e3 100644
>>>> --- a/drivers/leds/Kconfig
>>>> +++ b/drivers/leds/Kconfig
>>>> @@ -345,6 +345,14 @@ config LEDS_PCA963X
>>>> LED driver chip accessed via the I2C bus. Supported
>>>> devices include PCA9633 and PCA9634
>>>>
>>>> +config LEDS_RT5033
>>>> + tristate "LED support for RT5033 PMIC"
>>>> + depends on LEDS_CLASS_FLASH && OF
>>>> + depends on MFD_RT5033
>>>> + help
>>>> + This option enables support for on-chip LED driver on
>>>> + RT5033 PMIC.
>>>> +
>>>> config LEDS_WM831X_STATUS
>>>> tristate "LED support for status LEDs on WM831x PMICs"
>>>> depends on LEDS_CLASS
>>>> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
>>>> index b503f92..bcc4d93 100644
>>>> --- a/drivers/leds/Makefile
>>>> +++ b/drivers/leds/Makefile
>>>> @@ -23,6 +23,7 @@ obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o
>>>> obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
>>>> obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
>>>> obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
>>>> +obj-$(CONFIG_LEDS_RT5033) += leds-rt5033.o
>>>> obj-$(CONFIG_LEDS_GPIO_REGISTER) += leds-gpio-register.o
>>>> obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
>>>> obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
>>>> diff --git a/drivers/leds/leds-rt5033.c b/drivers/leds/leds-rt5033.c
>>>> new file mode 100644
>>>> index 0000000..b470c94
>>>> --- /dev/null
>>>> +++ b/drivers/leds/leds-rt5033.c
>>>> @@ -0,0 +1,223 @@
>>>> +/*
>>>> + * led driver for RT5033
>>>> + *
>>>> + * Copyright (C) 2015 Samsung Electronics, Co., Ltd.
>>>> + * Ingi Kim <ingi2.kim@...sung.com>
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or modify
>>>> + * it under the terms of the GNU General Public License version 2 as
>>>> + * published by the Free Software Foundation.
>>>> + *
>>>> + */
>>>> +
>>>> +#include <linux/mfd/rt5033.h>
>>>> +#include <linux/mfd/rt5033-private.h>
>>>> +#include <linux/module.h>
>>>> +#include <linux/platform_device.h>
>>>> +
>>>> +#define RT5033_LED_FLASH_TIMEOUT_MIN 64000
>>>> +#define RT5033_LED_FLASH_TIMEOUT_STEPS 32000
>>>> +#define RT5033_LED_TORCH_CURRENT_LEVEL_MAX 16
>>>> +
>>>> +/* Macro for getting offset of flash timeout */
>>>> +#define GET_TIMEOUT_OFFSET(tm, step) ((tm) / (step) - 2)
>>>> +
>>>> +static struct rt5033_led *flcdev_to_led(
>>>> + struct led_classdev_flash *fled_cdev)
>>>> +{
>>>> + return container_of(fled_cdev, struct rt5033_led, fled_cdev);
>>>> +}
>>>> +
>>>> +static int rt5033_led_brightness_set(struct led_classdev *led_cdev,
>>>> + enum led_brightness brightness)
>>>> +{
>>>> + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
>>>> + struct rt5033_led *led = flcdev_to_led(fled_cdev);
>>>
>>> I assume that you don't use mutex here deliberately?
>>>
>>
>> Actually I'm not sure why flash driver uses mutex.
>
> Which flash driver do you have on mind?
>
Oh, nothing on my mind, I can understand it's usage on flash led driver through your description
>> In consideration of blocking competition, however, I'd be better to use it
>>
>
> [...]
>
>>>> +
>>>> +static int rt5033_led_flash_strobe_set(struct led_classdev_flash *fled_cdev,
>>>> + bool state)
>>>> +{
>>>> + struct rt5033_led *led = flcdev_to_led(fled_cdev);
>>>> + u32 flash_tm_reg;
>>>
>>> I think that you need a mutex here and in rt5033_led_flash_strobe_set. Otherwise following is possible:
>>>
>>> Process 1:
>>> rt5033_led_flash_strobe_set(led_cdev, 1);
>>>
>>> regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
>>> RT5033_FLED_FUNC1_MASK, RT5033_FLED_RESET);
>>> fled_cdev->led_cdev.brightness = LED_OFF;
>>>
>>> Process 2:
>>> led_set_brightness(led_cdev, 1);
>>>
>>> fled_cdev->led_cdev.brightness = 1;
>>>
>>> rt5033_led_brightness_set(led_cdev, LED_FULL);
>>>
>>> regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
>>> RT5033_FLED_FUNC1_MASK, RT5033_FLED_PINCTRL);
>>> regmap_update_bits(led->regmap, RT5033_REG_FLED_CTRL1,
>>> RT5033_FLED_CTRL1_MASK,
>>> (brightness - 1) << 4);
>>> regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION2,
>>> RT5033_FLED_CTRL2_MASK, RT5033_FLED_ENFLED);
>>>
>>> Process 1:
>>> regmap_update_bits(led->regmap, RT5033_REG_FLED_STROBE_CTRL2,
>>> RT5033_FLED_STRBCTRL2_MASK, flash_tm_reg);
>>> regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
>>> RT5033_FLED_FUNC1_MASK, RT5033_FLED_STRB_SEL
>>> | RT5033_FLED_PINCTRL);
>>> regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION2,
>>> RT5033_FLED_FUNC2_MASK, RT5033_FLED_ENFLED
>>>
>>> In a result LED class device will report brightness value 1,
>>> whereas it would be inconsistent with hardware state, since
>>> flash strobe turns torch mode off.
>>>
>>>
>>
>> Thanks for your explanation in detail,
>> I was worried about cases of using shared resource for flash led.
>> because I thought flash led would be called just from camera or directly itself.
>> I should consider using mutex
>
> You don't provide support for v4l2-flash-led-class and you don't
> implement external_strobe_set op. Only if the op is implemented a v4l2
> device can switch the strobe source from software to external,
> which allows strobing the flash directly by camera sensor or ISP,
> but without software interaction.
>
Okay, thanks :)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists