linux-kernel - [PATCH v2] ARM: edma: special case slot limit workaround

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <87a8rjt7p9.fsf_-_@linutronix.de>
Date:	Fri, 16 Oct 2015 12:43:14 +0200
From:	John Ogness <john.ogness@...utronix.de>
To:	vinod.koul@...el.com
Cc:	peter.ujfalusi@...com
Subject: [PATCH v2] ARM: edma: special case slot limit workaround

Currently drivers are limited to 19 slots for cyclic transfers.
However, if the DMA burst size is the same as the period size,
the period size can be changed to the full buffer size and
intermediate interrupts activated. Since intermediate interrupts
will trigger for each burst and the burst size is the same as
the period size, the driver will get interrupts each period as
expected. This has the benefit of allowing the functionality of
many more slots, but only uses 2 slots.

This workaround is only active if more than 19 slots are needed
and the burst size matches the period size.

Signed-off-by: John Ogness <john.ogness@...utronix.de>
---
 v1-v2 changes
 . rebased for next-20151016

 drivers/dma/edma.c |   25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index 7eefbf1..f846935 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -1364,6 +1364,7 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
 	struct edma_desc *edesc;
 	dma_addr_t src_addr, dst_addr;
 	enum dma_slave_buswidth dev_width;
+	bool use_intermediate = false;
 	u32 burst;
 	int i, ret, nslots;
 
@@ -1405,8 +1406,21 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
 	 * but the synchronization is difficult to achieve with Cyclic and
 	 * cannot be guaranteed, so we error out early.
 	 */
-	if (nslots > MAX_NR_SG)
-		return NULL;
+	if (nslots > MAX_NR_SG) {
+		/*
+		 * If the burst and period sizes are the same, we can put
+		 * the full buffer into a single period and activate
+		 * intermediate interrupts. This will produce interrupts
+		 * after each burst, which is also after each desired period.
+		 */
+		if (burst == period_len) {
+			period_len = buf_len;
+			nslots = 2;
+			use_intermediate = true;
+		} else {
+			return NULL;
+		}
+	}
 
 	edesc = kzalloc(sizeof(*edesc) + nslots * sizeof(edesc->pset[0]),
 			GFP_ATOMIC);
@@ -1484,8 +1498,13 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
 		/*
 		 * Enable period interrupt only if it is requested
 		 */
-		if (tx_flags & DMA_PREP_INTERRUPT)
+		if (tx_flags & DMA_PREP_INTERRUPT) {
 			edesc->pset[i].param.opt |= TCINTEN;
+
+			/* Also enable intermediate interrupts if necessary */
+			if (use_intermediate)
+				edesc->pset[i].param.opt |= ITCINTEN;
+		}
 	}
 
 	/* Place the cyclic channel to highest priority queue */
-- 
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/