| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1445000691-12402-2-git-send-email-ludovic.desroches@atmel.com>
Date: Fri, 16 Oct 2015 15:04:44 +0200
From: Ludovic Desroches <ludovic.desroches@...el.com>
To: <nicolas.ferre@...el.com>, <alexandre.belloni@...e-electrons.com>
CC: <plagnioj@...osoft.com>, <linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<cyrille.pitchen@...el.com>,
Ludovic Desroches <ludovic.desroches@...el.com>
Subject: [PATCH v2 1/8] ARM: at91/dt: sama5d2: add missing devices
Big update of the sama5d2.dtsi file since many patches have reached te
mainline:
- add generated clocks
- enable crypto devices
- add flexcom devices
- add tdes device
- add sdmmc devices
Signed-off-by: Ludovic Desroches <ludovic.desroches@...el.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@...el.com>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@...el.com>
---
arch/arm/boot/dts/sama5d2.dtsi | 152 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 150 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index cc05cde..5afccbc 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -263,6 +263,24 @@
cache-level = <2>;
};
+ sdmmc0: sdio-host@...00000 {
+ compatible = "atmel,sama5d2-sdhci";
+ reg = <0xa0000000 0x300>;
+ interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
+ clock-names = "hclock", "multclk", "baseclk";
+ status = "disabled";
+ };
+
+ sdmmc1: sdio-host@...00000 {
+ compatible = "atmel,sama5d2-sdhci";
+ reg = <0xb0000000 0x300>;
+ interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&sdmmc1_hclk>, <&sdmmc1_gclk>, <&main>;
+ clock-names = "hclock", "multclk", "baseclk";
+ status = "disabled";
+ };
+
apb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -619,6 +637,18 @@
atmel,clk-output-range = <0 83000000>;
};
+ i2s0_clk: i2s0_clk {
+ #clock-cells = <0>;
+ reg = <54>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ i2s1_clk: i2s1_clk {
+ #clock-cells = <0>;
+ reg = <55>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
classd_clk: classd_clk {
#clock-cells = <0>;
reg = <59>;
@@ -697,6 +727,52 @@
reg = <53>;
};
};
+
+ gck {
+ compatible = "atmel,sama5d2-clk-generated";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+ sdmmc0_gclk: sdmmc0_gclk {
+ #clock-cells = <0>;
+ reg = <31>;
+ };
+
+ sdmmc1_gclk: sdmmc1_gclk {
+ #clock-cells = <0>;
+ reg = <32>;
+ };
+
+ tcb0_gclk: tcb0_gclk {
+ #clock-cells = <0>;
+ reg = <35>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ tcb1_gclk: tcb1_gclk {
+ #clock-cells = <0>;
+ reg = <36>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ pwm_gclk: pwm_gclk {
+ #clock-cells = <0>;
+ reg = <38>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ i2s0_gclk: i2s0_gclk {
+ #clock-cells = <0>;
+ reg = <54>;
+ };
+
+ i2s1_gclk: i2s1_gclk {
+ #clock-cells = <0>;
+ reg = <55>;
+ };
+ };
};
sha@...28000 {
@@ -709,7 +785,7 @@
dma-names = "tx";
clocks = <&sha_clk>;
clock-names = "sha_clk";
- status = "disabled";
+ status = "okay";
};
aes@...2c000 {
@@ -725,7 +801,7 @@
dma-names = "tx", "rx";
clocks = <&aes_clk>;
clock-names = "aes_clk";
- status = "disabled";
+ status = "okay";
};
spi0: spi@...00000 {
@@ -820,6 +896,32 @@
status = "disabled";
};
+ flx0: flexcom@...34000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8034000 0x200>;
+ clocks = <&flx0_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8034000 0x800>;
+ status = "disabled";
+ };
+
+ flx1: flexcom@...38000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8038000 0x200>;
+ clocks = <&flx1_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8038000 0x800>;
+ status = "disabled";
+ };
+
+ rstc@...48000 {
+ compatible = "atmel,sama5d3-rstc";
+ reg = <0xf8048000 0x10>;
+ clocks = <&clk32k>;
+ };
+
pit: timer@...48030 {
compatible = "atmel,at91sam9260-pit";
reg = <0xf8048030 0x10>;
@@ -897,6 +999,36 @@
status = "disabled";
};
+ flx2: flexcom@...10000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xfc010000 0x200>;
+ clocks = <&flx2_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xfc010000 0x800>;
+ status = "disabled";
+ };
+
+ flx3: flexcom@...14000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xfc014000 0x200>;
+ clocks = <&flx3_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xfc014000 0x800>;
+ status = "disabled";
+ };
+
+ flx4: flexcom@...18000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xfc018000 0x200>;
+ clocks = <&flx4_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xfc018000 0x800>;
+ status = "disabled";
+ };
+
aic: interrupt-controller@...20000 {
#interrupt-cells = <3>;
compatible = "atmel,sama5d2-aic";
@@ -935,6 +1067,22 @@
#gpio-cells = <2>;
clocks = <&pioA_clk>;
};
+
+ tdes@...44000 {
+ compatible = "atmel,at91sam9g46-tdes";
+ reg = <0xfc044000 0x100>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(28))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(29))>;
+ dma-names = "tx", "rx";
+ clocks = <&tdes_clk>;
+ clock-names = "tdes_clk";
+ status = "okay";
+ };
};
};
};
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists