[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <tip-c0ff971ef9acacd4d2caa508e444edad958dead9@git.kernel.org>
Date: Fri, 16 Oct 2015 07:33:33 -0700
From: tip-bot for Vitaly Kuznetsov <tipbot@...or.com>
To: linux-tip-commits@...r.kernel.org
Cc: jiang.liu@...ux.intel.com, kys@...rosoft.com, tglx@...utronix.de,
vkuznets@...hat.com, mingo@...nel.org, yinghai@...nel.org,
hpa@...or.com, linux-kernel@...r.kernel.org
Subject: [tip:x86/urgent] x86/ioapic:
Disable interrupts when re-routing legacy IRQs
Commit-ID: c0ff971ef9acacd4d2caa508e444edad958dead9
Gitweb: http://git.kernel.org/tip/c0ff971ef9acacd4d2caa508e444edad958dead9
Author: Vitaly Kuznetsov <vkuznets@...hat.com>
AuthorDate: Thu, 15 Oct 2015 19:42:23 +0200
Committer: Thomas Gleixner <tglx@...utronix.de>
CommitDate: Fri, 16 Oct 2015 16:31:24 +0200
x86/ioapic: Disable interrupts when re-routing legacy IRQs
A sporadic hang with consequent crash is observed when booting Hyper-V Gen1
guests:
Call Trace:
<IRQ>
[<ffffffff810ab68d>] ? trace_hardirqs_off+0xd/0x10
[<ffffffff8107b616>] queue_work_on+0x46/0x90
[<ffffffff81365696>] ? add_interrupt_randomness+0x176/0x1d0
...
<EOI>
[<ffffffff81471ddb>] ? _raw_spin_unlock_irqrestore+0x3b/0x60
[<ffffffff810c295e>] __irq_put_desc_unlock+0x1e/0x40
[<ffffffff810c5c35>] irq_modify_status+0xb5/0xd0
[<ffffffff8104adbb>] mp_register_handler+0x4b/0x70
[<ffffffff8104c55a>] mp_irqdomain_alloc+0x1ea/0x2a0
[<ffffffff810c7f10>] irq_domain_alloc_irqs_recursive+0x40/0xa0
[<ffffffff810c860c>] __irq_domain_alloc_irqs+0x13c/0x2b0
[<ffffffff8104b070>] alloc_isa_irq_from_domain.isra.1+0xc0/0xe0
[<ffffffff8104bfa5>] mp_map_pin_to_irq+0x165/0x2d0
[<ffffffff8104c157>] pin_2_irq+0x47/0x80
[<ffffffff81744253>] setup_IO_APIC+0xfe/0x802
...
[<ffffffff814631c0>] ? rest_init+0x140/0x140
The issue is easily reproducible with a simple instrumentation: if
mdelay(10) is put between mp_setup_entry() and mp_register_handler() calls
in mp_irqdomain_alloc() Hyper-V guest always fails to boot when re-routing
IRQ0. The issue seems to be caused by the fact that we don't disable
interrupts while doing IOPIC programming for legacy IRQs and IRQ0 actually
happens.
Protect the setup sequence against concurrent interrupts.
[ tglx: Make the protection unconditional and not only for legacy
interrupts ]
Signed-off-by: Vitaly Kuznetsov <vkuznets@...hat.com>
Cc: Jiang Liu <jiang.liu@...ux.intel.com>
Cc: Yinghai Lu <yinghai@...nel.org>
Cc: K. Y. Srinivasan <kys@...rosoft.com>
Link: http://lkml.kernel.org/r/1444930943-19336-1-git-send-email-vkuznets@redhat.com
Signed-off-by: Thomas Gleixner <tglx@...utronix.de>
---
arch/x86/kernel/apic/io_apic.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 5c60bb1..bb6bfc0 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2907,6 +2907,7 @@ int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
struct irq_data *irq_data;
struct mp_chip_data *data;
struct irq_alloc_info *info = arg;
+ unsigned long flags;
if (!info || nr_irqs > 1)
return -EINVAL;
@@ -2939,11 +2940,14 @@ int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
cfg = irqd_cfg(irq_data);
add_pin_to_irq_node(data, ioapic_alloc_attr_node(info), ioapic, pin);
+
+ local_irq_save(flags);
if (info->ioapic_entry)
mp_setup_entry(cfg, data, info->ioapic_entry);
mp_register_handler(virq, data->trigger);
if (virq < nr_legacy_irqs())
legacy_pic->mask(virq);
+ local_irq_restore(flags);
apic_printk(APIC_VERBOSE, KERN_DEBUG
"IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i Dest:%d)\n",
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists