| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1445114011-4191-7-git-send-email-kishon@ti.com>
Date: Sun, 18 Oct 2015 02:03:30 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: <gregkh@...uxfoundation.org>
CC: <kishon@...com>, <linux-kernel@...r.kernel.org>
Subject: [PATCH 6/7] phy: cygnus: pcie: Add Cygnus PCIe PHY support
From: Ray Jui <rjui@...adcom.com>
This patch adds the PCIe PHY support for the Broadcom PCIe RC interface
on Cygnus
Signed-off-by: Ray Jui <rjui@...adcom.com>
Reviewed-by: Arun Parameswaran <aparames@...adcom.com>
Reviewed-by: JD (Jiandong) Zheng <jdzheng@...adcom.com>
Reviewed-by: Scott Branden <sbranden@...adcom.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
---
drivers/phy/Kconfig | 9 ++
drivers/phy/Makefile | 1 +
drivers/phy/phy-bcm-cygnus-pcie.c | 213 +++++++++++++++++++++++++++++++++++++
3 files changed, 223 insertions(+)
create mode 100644 drivers/phy/phy-bcm-cygnus-pcie.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index ec436c1..7eb5859d 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -380,4 +380,13 @@ config PHY_BRCMSTB_SATA
Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
Likely useful only with CONFIG_SATA_BRCMSTB enabled.
+config PHY_CYGNUS_PCIE
+ tristate "Broadcom Cygnus PCIe PHY driver"
+ depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
+ select GENERIC_PHY
+ default ARCH_BCM_CYGNUS
+ help
+ Enable this to support the Broadcom Cygnus PCIe PHY.
+ If unsure, say N.
+
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index a7cc629..075db1a 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -47,3 +47,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
+obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
diff --git a/drivers/phy/phy-bcm-cygnus-pcie.c b/drivers/phy/phy-bcm-cygnus-pcie.c
new file mode 100644
index 0000000..7ad72b7
--- /dev/null
+++ b/drivers/phy/phy-bcm-cygnus-pcie.c
@@ -0,0 +1,213 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define PCIE_CFG_OFFSET 0x00
+#define PCIE1_PHY_IDDQ_SHIFT 10
+#define PCIE0_PHY_IDDQ_SHIFT 2
+
+enum cygnus_pcie_phy_id {
+ CYGNUS_PHY_PCIE0 = 0,
+ CYGNUS_PHY_PCIE1,
+ MAX_NUM_PHYS,
+};
+
+struct cygnus_pcie_phy_core;
+
+/**
+ * struct cygnus_pcie_phy - Cygnus PCIe PHY device
+ * @core: pointer to the Cygnus PCIe PHY core control
+ * @id: internal ID to identify the Cygnus PCIe PHY
+ * @phy: pointer to the kernel PHY device
+ */
+struct cygnus_pcie_phy {
+ struct cygnus_pcie_phy_core *core;
+ enum cygnus_pcie_phy_id id;
+ struct phy *phy;
+};
+
+/**
+ * struct cygnus_pcie_phy_core - Cygnus PCIe PHY core control
+ * @dev: pointer to device
+ * @base: base register
+ * @lock: mutex to protect access to individual PHYs
+ * @phys: pointer to Cygnus PHY device
+ */
+struct cygnus_pcie_phy_core {
+ struct device *dev;
+ void __iomem *base;
+ struct mutex lock;
+ struct cygnus_pcie_phy phys[MAX_NUM_PHYS];
+};
+
+static int cygnus_pcie_power_config(struct cygnus_pcie_phy *phy, bool enable)
+{
+ struct cygnus_pcie_phy_core *core = phy->core;
+ unsigned shift;
+ u32 val;
+
+ mutex_lock(&core->lock);
+
+ switch (phy->id) {
+ case CYGNUS_PHY_PCIE0:
+ shift = PCIE0_PHY_IDDQ_SHIFT;
+ break;
+
+ case CYGNUS_PHY_PCIE1:
+ shift = PCIE1_PHY_IDDQ_SHIFT;
+ break;
+
+ default:
+ mutex_unlock(&core->lock);
+ dev_err(core->dev, "PCIe PHY %d invalid\n", phy->id);
+ return -EINVAL;
+ }
+
+ if (enable) {
+ val = readl(core->base + PCIE_CFG_OFFSET);
+ val &= ~BIT(shift);
+ writel(val, core->base + PCIE_CFG_OFFSET);
+ /*
+ * Wait 50 ms for the PCIe Serdes to stabilize after the analog
+ * front end is brought up
+ */
+ msleep(50);
+ } else {
+ val = readl(core->base + PCIE_CFG_OFFSET);
+ val |= BIT(shift);
+ writel(val, core->base + PCIE_CFG_OFFSET);
+ }
+
+ mutex_unlock(&core->lock);
+ dev_dbg(core->dev, "PCIe PHY %d %s\n", phy->id,
+ enable ? "enabled" : "disabled");
+ return 0;
+}
+
+static int cygnus_pcie_phy_power_on(struct phy *p)
+{
+ struct cygnus_pcie_phy *phy = phy_get_drvdata(p);
+
+ return cygnus_pcie_power_config(phy, true);
+}
+
+static int cygnus_pcie_phy_power_off(struct phy *p)
+{
+ struct cygnus_pcie_phy *phy = phy_get_drvdata(p);
+
+ return cygnus_pcie_power_config(phy, false);
+}
+
+static struct phy_ops cygnus_pcie_phy_ops = {
+ .power_on = cygnus_pcie_phy_power_on,
+ .power_off = cygnus_pcie_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int cygnus_pcie_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node, *child;
+ struct cygnus_pcie_phy_core *core;
+ struct phy_provider *provider;
+ struct resource *res;
+ unsigned cnt = 0;
+
+ if (of_get_child_count(node) == 0) {
+ dev_err(dev, "PHY no child node\n");
+ return -ENODEV;
+ }
+
+ core = devm_kzalloc(dev, sizeof(*core), GFP_KERNEL);
+ if (!core)
+ return -ENOMEM;
+
+ core->dev = dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ core->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(core->base))
+ return PTR_ERR(core->base);
+
+ mutex_init(&core->lock);
+
+ for_each_available_child_of_node(node, child) {
+ unsigned int id;
+ struct cygnus_pcie_phy *p;
+
+ if (of_property_read_u32(child, "reg", &id)) {
+ dev_err(dev, "missing reg property for %s\n",
+ child->name);
+ return -EINVAL;
+ }
+
+ if (id >= MAX_NUM_PHYS) {
+ dev_err(dev, "invalid PHY id: %u\n", id);
+ return -EINVAL;
+ }
+
+ if (core->phys[id].phy) {
+ dev_err(dev, "duplicated PHY id: %u\n", id);
+ return -EINVAL;
+ }
+
+ p = &core->phys[id];
+ p->phy = devm_phy_create(dev, child, &cygnus_pcie_phy_ops);
+ if (IS_ERR(p->phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(p->phy);
+ }
+
+ p->core = core;
+ p->id = id;
+ phy_set_drvdata(p->phy, p);
+ cnt++;
+ }
+
+ dev_set_drvdata(dev, core);
+
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(provider)) {
+ dev_err(dev, "failed to register PHY provider\n");
+ return PTR_ERR(provider);
+ }
+
+ dev_dbg(dev, "registered %u PCIe PHY(s)\n", cnt);
+
+ return 0;
+}
+
+static const struct of_device_id cygnus_pcie_phy_match_table[] = {
+ { .compatible = "brcm,cygnus-pcie-phy" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, cygnus_pcie_phy_match_table);
+
+static struct platform_driver cygnus_pcie_phy_driver = {
+ .driver = {
+ .name = "cygnus-pcie-phy",
+ .of_match_table = cygnus_pcie_phy_match_table,
+ },
+ .probe = cygnus_pcie_phy_probe,
+};
+module_platform_driver(cygnus_pcie_phy_driver);
+
+MODULE_AUTHOR("Ray Jui <rjui@...adcom.com>");
+MODULE_DESCRIPTION("Broadcom Cygnus PCIe PHY driver");
+MODULE_LICENSE("GPL v2");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists