lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20151018020214.777691639@linuxfoundation.org>
Date:	Sat, 17 Oct 2015 19:05:24 -0700
From:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:	linux-kernel@...r.kernel.org
Cc:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	stable@...r.kernel.org, Filipe Manana <fdmanana@...e.com>,
	Qu Wenruo <quwenruo@...fujitsu.com>,
	Liu Bo <bo.li.liu@...cle.com>
Subject: [PATCH 3.14 32/79] Btrfs: fix read corruption of compressed and shared extents

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Filipe Manana <fdmanana@...e.com>

commit 005efedf2c7d0a270ffbe28d8997b03844f3e3e7 upstream.

If a file has a range pointing to a compressed extent, followed by
another range that points to the same compressed extent and a read
operation attempts to read both ranges (either completely or part of
them), the pages that correspond to the second range are incorrectly
filled with zeroes.

Consider the following example:

  File layout
  [0 - 8K]                      [8K - 24K]
      |                             |
      |                             |
   points to extent X,         points to extent X,
   offset 4K, length of 8K     offset 0, length 16K

  [extent X, compressed length = 4K uncompressed length = 16K]

If a readpages() call spans the 2 ranges, a single bio to read the extent
is submitted - extent_io.c:submit_extent_page() would only create a new
bio to cover the second range pointing to the extent if the extent it
points to had a different logical address than the extent associated with
the first range. This has a consequence of the compressed read end io
handler (compression.c:end_compressed_bio_read()) finish once the extent
is decompressed into the pages covering the first range, leaving the
remaining pages (belonging to the second range) filled with zeroes (done
by compression.c:btrfs_clear_biovec_end()).

So fix this by submitting the current bio whenever we find a range
pointing to a compressed extent that was preceded by a range with a
different extent map. This is the simplest solution for this corner
case. Making the end io callback populate both ranges (or more, if we
have multiple pointing to the same extent) is a much more complex
solution since each bio is tightly coupled with a single extent map and
the extent maps associated to the ranges pointing to the shared extent
can have different offsets and lengths.

The following test case for fstests triggers the issue:

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"
  tmp=/tmp/$$
  status=1	# failure is the default!
  trap "_cleanup; exit \$status" 0 1 2 3 15

  _cleanup()
  {
      rm -f $tmp.*
  }

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter

  # real QA test starts here
  _need_to_be_root
  _supported_fs btrfs
  _supported_os Linux
  _require_scratch
  _require_cloner

  rm -f $seqres.full

  test_clone_and_read_compressed_extent()
  {
      local mount_opts=$1

      _scratch_mkfs >>$seqres.full 2>&1
      _scratch_mount $mount_opts

      # Create a test file with a single extent that is compressed (the
      # data we write into it is highly compressible no matter which
      # compression algorithm is used, zlib or lzo).
      $XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 4K"        \
                      -c "pwrite -S 0xbb 4K 8K"        \
                      -c "pwrite -S 0xcc 12K 4K"       \
                      $SCRATCH_MNT/foo | _filter_xfs_io

      # Now clone our extent into an adjacent offset.
      $CLONER_PROG -s $((4 * 1024)) -d $((16 * 1024)) -l $((8 * 1024)) \
          $SCRATCH_MNT/foo $SCRATCH_MNT/foo

      # Same as before but for this file we clone the extent into a lower
      # file offset.
      $XFS_IO_PROG -f -c "pwrite -S 0xaa 8K 4K"         \
                      -c "pwrite -S 0xbb 12K 8K"        \
                      -c "pwrite -S 0xcc 20K 4K"        \
                      $SCRATCH_MNT/bar | _filter_xfs_io

      $CLONER_PROG -s $((12 * 1024)) -d 0 -l $((8 * 1024)) \
          $SCRATCH_MNT/bar $SCRATCH_MNT/bar

      echo "File digests before unmounting filesystem:"
      md5sum $SCRATCH_MNT/foo | _filter_scratch
      md5sum $SCRATCH_MNT/bar | _filter_scratch

      # Evicting the inode or clearing the page cache before reading
      # again the file would also trigger the bug - reads were returning
      # all bytes in the range corresponding to the second reference to
      # the extent with a value of 0, but the correct data was persisted
      # (it was a bug exclusively in the read path). The issue happened
      # only if the same readpages() call targeted pages belonging to the
      # first and second ranges that point to the same compressed extent.
      _scratch_remount

      echo "File digests after mounting filesystem again:"
      # Must match the same digests we got before.
      md5sum $SCRATCH_MNT/foo | _filter_scratch
      md5sum $SCRATCH_MNT/bar | _filter_scratch
  }

  echo -e "\nTesting with zlib compression..."
  test_clone_and_read_compressed_extent "-o compress=zlib"

  _scratch_unmount

  echo -e "\nTesting with lzo compression..."
  test_clone_and_read_compressed_extent "-o compress=lzo"

  status=0
  exit

Signed-off-by: Filipe Manana <fdmanana@...e.com>
Reviewed-by: Qu Wenruo<quwenruo@...fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@...cle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 fs/btrfs/extent_io.c |   65 ++++++++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 57 insertions(+), 8 deletions(-)

--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -2681,7 +2681,8 @@ static int submit_extent_page(int rw, st
 			      bio_end_io_t end_io_func,
 			      int mirror_num,
 			      unsigned long prev_bio_flags,
-			      unsigned long bio_flags)
+			      unsigned long bio_flags,
+			      bool force_bio_submit)
 {
 	int ret = 0;
 	struct bio *bio;
@@ -2699,6 +2700,7 @@ static int submit_extent_page(int rw, st
 			contig = bio_end_sector(bio) == sector;
 
 		if (prev_bio_flags != bio_flags || !contig ||
+		    force_bio_submit ||
 		    merge_bio(rw, tree, page, offset, page_size, bio, bio_flags) ||
 		    bio_add_page(bio, page, page_size, offset) < page_size) {
 			ret = submit_one_bio(rw, bio, mirror_num,
@@ -2790,7 +2792,8 @@ static int __do_readpage(struct extent_i
 			 get_extent_t *get_extent,
 			 struct extent_map **em_cached,
 			 struct bio **bio, int mirror_num,
-			 unsigned long *bio_flags, int rw)
+			 unsigned long *bio_flags, int rw,
+			 u64 *prev_em_start)
 {
 	struct inode *inode = page->mapping->host;
 	u64 start = page_offset(page);
@@ -2838,6 +2841,7 @@ static int __do_readpage(struct extent_i
 	}
 	while (cur <= end) {
 		unsigned long pnr = (last_byte >> PAGE_CACHE_SHIFT) + 1;
+		bool force_bio_submit = false;
 
 		if (cur >= last_byte) {
 			char *userpage;
@@ -2888,6 +2892,49 @@ static int __do_readpage(struct extent_i
 		block_start = em->block_start;
 		if (test_bit(EXTENT_FLAG_PREALLOC, &em->flags))
 			block_start = EXTENT_MAP_HOLE;
+
+		/*
+		 * If we have a file range that points to a compressed extent
+		 * and it's followed by a consecutive file range that points to
+		 * to the same compressed extent (possibly with a different
+		 * offset and/or length, so it either points to the whole extent
+		 * or only part of it), we must make sure we do not submit a
+		 * single bio to populate the pages for the 2 ranges because
+		 * this makes the compressed extent read zero out the pages
+		 * belonging to the 2nd range. Imagine the following scenario:
+		 *
+		 *  File layout
+		 *  [0 - 8K]                     [8K - 24K]
+		 *    |                               |
+		 *    |                               |
+		 * points to extent X,         points to extent X,
+		 * offset 4K, length of 8K     offset 0, length 16K
+		 *
+		 * [extent X, compressed length = 4K uncompressed length = 16K]
+		 *
+		 * If the bio to read the compressed extent covers both ranges,
+		 * it will decompress extent X into the pages belonging to the
+		 * first range and then it will stop, zeroing out the remaining
+		 * pages that belong to the other range that points to extent X.
+		 * So here we make sure we submit 2 bios, one for the first
+		 * range and another one for the third range. Both will target
+		 * the same physical extent from disk, but we can't currently
+		 * make the compressed bio endio callback populate the pages
+		 * for both ranges because each compressed bio is tightly
+		 * coupled with a single extent map, and each range can have
+		 * an extent map with a different offset value relative to the
+		 * uncompressed data of our extent and different lengths. This
+		 * is a corner case so we prioritize correctness over
+		 * non-optimal behavior (submitting 2 bios for the same extent).
+		 */
+		if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags) &&
+		    prev_em_start && *prev_em_start != (u64)-1 &&
+		    *prev_em_start != em->orig_start)
+			force_bio_submit = true;
+
+		if (prev_em_start)
+			*prev_em_start = em->orig_start;
+
 		free_extent_map(em);
 		em = NULL;
 
@@ -2937,7 +2984,8 @@ static int __do_readpage(struct extent_i
 					 bdev, bio, pnr,
 					 end_bio_extent_readpage, mirror_num,
 					 *bio_flags,
-					 this_bio_flag);
+					 this_bio_flag,
+					 force_bio_submit);
 		if (!ret) {
 			nr++;
 			*bio_flags = this_bio_flag;
@@ -2969,6 +3017,7 @@ static inline void __do_contiguous_readp
 	struct inode *inode;
 	struct btrfs_ordered_extent *ordered;
 	int index;
+	u64 prev_em_start = (u64)-1;
 
 	inode = pages[0]->mapping->host;
 	while (1) {
@@ -2984,7 +3033,7 @@ static inline void __do_contiguous_readp
 
 	for (index = 0; index < nr_pages; index++) {
 		__do_readpage(tree, pages[index], get_extent, em_cached, bio,
-			      mirror_num, bio_flags, rw);
+			      mirror_num, bio_flags, rw, &prev_em_start);
 		page_cache_release(pages[index]);
 	}
 }
@@ -3052,7 +3101,7 @@ static int __extent_read_full_page(struc
 	}
 
 	ret = __do_readpage(tree, page, get_extent, NULL, bio, mirror_num,
-			    bio_flags, rw);
+			    bio_flags, rw, NULL);
 	return ret;
 }
 
@@ -3078,7 +3127,7 @@ int extent_read_full_page_nolock(struct
 	int ret;
 
 	ret = __do_readpage(tree, page, get_extent, NULL, &bio, mirror_num,
-				      &bio_flags, READ);
+			    &bio_flags, READ, NULL);
 	if (bio)
 		ret = submit_one_bio(READ, bio, mirror_num, bio_flags);
 	return ret;
@@ -3347,7 +3396,7 @@ static int __extent_writepage(struct pag
 						 sector, iosize, pg_offset,
 						 bdev, &epd->bio, max_nr,
 						 end_bio_extent_writepage,
-						 0, 0, 0);
+						 0, 0, 0, false);
 			if (ret)
 				SetPageError(page);
 		}
@@ -3516,7 +3565,7 @@ static int write_one_eb(struct extent_bu
 		ret = submit_extent_page(rw, tree, p, offset >> 9,
 					 PAGE_CACHE_SIZE, 0, bdev, &epd->bio,
 					 -1, end_bio_extent_buffer_writepage,
-					 0, epd->bio_flags, bio_flags);
+					 0, epd->bio_flags, bio_flags, false);
 		epd->bio_flags = bio_flags;
 		if (ret) {
 			set_bit(EXTENT_BUFFER_IOERR, &eb->bflags);


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ