lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1445455024-5519-1-git-send-email-nathan.sullivan@ni.com>
Date:	Wed, 21 Oct 2015 14:17:04 -0500
From:	Nathan Sullivan <nathan.sullivan@...com>
To:	f.fainelli@...il.com
Cc:	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	Nathan Sullivan <nathan.sullivan@...com>
Subject: [PATCH] net/phy: micrel: Add workaround for bad autoneg

Very rarely, the KSZ9031 will appear to complete autonegotiation, but
will drop all traffic afterwards.  When this happens, the idle error
count will read 0xFF after autonegotiation completes.  Reset the PHY
when in that state.

Signed-off-by: Nathan Sullivan <nathan.sullivan@...com>
---
 drivers/net/phy/micrel.c |   23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 499185e..cf6312f 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -514,6 +514,27 @@ static int ksz8873mll_read_status(struct phy_device *phydev)
 	return 0;
 }
 
+static int ksz9031_read_status(struct phy_device *phydev)
+{
+	int err;
+	int regval;
+
+	err = genphy_read_status(phydev);
+	if (err)
+		return err;
+
+	/* Make sure the PHY is not broken. Read idle error count,
+	 * and reset the PHY if it is maxed out.
+	 */
+	regval = phy_read(phydev, MII_STAT1000);
+	if ((regval & 0xFF) == 0xFF) {
+		phy_init_hw(phydev);
+		phydev->link = 0;
+	}
+
+	return 0;
+}
+
 static int ksz8873mll_config_aneg(struct phy_device *phydev)
 {
 	return 0;
@@ -772,7 +793,7 @@ static struct phy_driver ksphy_driver[] = {
 	.driver_data	= &ksz9021_type,
 	.config_init	= ksz9031_config_init,
 	.config_aneg	= genphy_config_aneg,
-	.read_status	= genphy_read_status,
+	.read_status	= ksz9031_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
 	.suspend	= genphy_suspend,
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ