| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <bae46bbb5ab54cb802f424a6e1e685024b021d09.1445284543.git.menschel-d@posteo.de>
Date: Wed, 21 Oct 2015 23:16:53 +0200
From: Dennis Menschel <menschel-d@...teo.de>
To: Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
Noralf Trønnes <noralf@...nnes.org>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-kernel@...r.kernel.org, devel@...verdev.osuosl.org,
Dennis Menschel <menschel-d@...teo.de>
Subject: [PATCH 1/4] staging: fbtft: use MIPI DCS for ST7789V and C-Berry28
This patch makes use of the standard MIPI Display Command Set to remove
redundant entries from the command enum of the ST7789V display controller
and also some of the magic constants found in the init sequence of the
C-Berry28 display.
Signed-off-by: Dennis Menschel <menschel-d@...teo.de>
---
drivers/staging/fbtft/fb_st7789v.c | 39 +++++++++++++-----------------------
drivers/staging/fbtft/fbtft_device.c | 7 ++++---
2 files changed, 18 insertions(+), 28 deletions(-)
diff --git a/drivers/staging/fbtft/fb_st7789v.c b/drivers/staging/fbtft/fb_st7789v.c
index dc7d304..22a7b5b 100644
--- a/drivers/staging/fbtft/fb_st7789v.c
+++ b/drivers/staging/fbtft/fb_st7789v.c
@@ -18,6 +18,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <video/mipi_display.h>
#include "fbtft.h"
@@ -30,14 +31,6 @@
/**
* enum st7789v_command - ST7789V display controller commands
*
- * @SLPOUT: sleep out
- * @DISPOFF: display off
- * @DISPON: display on
- * @CASET: column address set
- * @RASET: row address set
- * @RAMRW: memory write
- * @MADCTL: memory data access control
- * @COLMOD: interface pixel format
* @PORCTRL: porch setting
* @GCTRL: gate control
* @VCOMS: VCOM setting
@@ -54,16 +47,10 @@
*
* Note that the ST7789V display controller offers quite a few more commands
* which have been omitted from this list as they are not used at the moment.
+ * Furthermore, commands that are compliant with the MIPI DCS have been left
+ * out as well to avoid duplicate entries.
*/
enum st7789v_command {
- SLPOUT = 0x11,
- DISPOFF = 0x28,
- DISPON = 0x29,
- CASET = 0x2A,
- RASET = 0x2B,
- RAMRW = 0x2C,
- MADCTL = 0x36,
- COLMOD = 0x3A,
PORCTRL = 0xB2,
GCTRL = 0xB7,
VCOMS = 0xBB,
@@ -93,11 +80,11 @@ enum st7789v_command {
*/
static int default_init_sequence[] = {
/* turn off sleep mode */
- -1, SLPOUT,
+ -1, MIPI_DCS_EXIT_SLEEP_MODE,
-2, 120,
/* set pixel format to RGB-565 */
- -1, COLMOD, 0x05,
+ -1, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT,
-1, PORCTRL, 0x08, 0x08, 0x00, 0x22, 0x22,
@@ -135,7 +122,7 @@ static int default_init_sequence[] = {
*/
-1, PWCTRL1, 0xA4, 0xA1,
- -1, DISPON,
+ -1, MIPI_DCS_SET_DISPLAY_ON,
-3,
};
@@ -151,9 +138,11 @@ static int default_init_sequence[] = {
*/
static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
{
- write_reg(par, CASET, xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
- write_reg(par, RASET, ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
- write_reg(par, RAMRW);
+ write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+ xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
+ write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+ ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
+ write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
}
/**
@@ -184,7 +173,7 @@ static int set_var(struct fbtft_par *par)
default:
return -EINVAL;
}
- write_reg(par, MADCTL, madctl_par);
+ write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, madctl_par);
return 0;
}
@@ -256,9 +245,9 @@ static int set_gamma(struct fbtft_par *par, unsigned long *curves)
static int blank(struct fbtft_par *par, bool on)
{
if (on)
- write_reg(par, DISPOFF);
+ write_reg(par, MIPI_DCS_SET_DISPLAY_OFF);
else
- write_reg(par, DISPON);
+ write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
return 0;
}
diff --git a/drivers/staging/fbtft/fbtft_device.c b/drivers/staging/fbtft/fbtft_device.c
index 0e501d0..d7475d7 100644
--- a/drivers/staging/fbtft/fbtft_device.c
+++ b/drivers/staging/fbtft/fbtft_device.c
@@ -19,6 +19,7 @@
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
+#include <video/mipi_display.h>
#include "fbtft.h"
@@ -132,11 +133,11 @@ static void adafruit18_green_tab_set_addr_win(struct fbtft_par *par,
static int cberry28_init_sequence[] = {
/* turn off sleep mode */
- -1, 0x11,
+ -1, MIPI_DCS_EXIT_SLEEP_MODE,
-2, 120,
/* set pixel format to RGB-565 */
- -1, 0x3A, 0x05,
+ -1, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT,
-1, 0xB2, 0x0C, 0x0C, 0x00, 0x33, 0x33,
@@ -174,7 +175,7 @@ static int cberry28_init_sequence[] = {
*/
-1, 0xD0, 0xA4, 0x61,
- -1, 0x29,
+ -1, MIPI_DCS_SET_DISPLAY_ON,
-3,
};
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists