[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1445489163-11045-2-git-send-email-appanad@xilinx.com>
Date: Thu, 22 Oct 2015 10:16:03 +0530
From: Kedareswara rao Appana <appana.durga.rao@...inx.com>
To: <anirudh@...inx.com>, <wg@...ndegger.com>, <mkl@...gutronix.de>,
<michal.simek@...inx.com>, <soren.brinkmann@...inx.com>,
<appanad@...inx.com>
CC: <linux-can@...r.kernel.org>, <netdev@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH 2/2] can: xilinx: fix bug in bus error handling
Simply resetting the peripheral on bus off condition is not enough,
Because we also need to re-initialize the whole device.
This patch fixes this issue.
Signed-off-by: Kedareswara rao Appana <appanad@...inx.com>
---
drivers/net/can/xilinx_can.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 055d6f3..9aeb85f 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -529,6 +529,8 @@ static int xcan_rx(struct net_device *ndev)
return 1;
}
+static void xcan_chip_stop(struct net_device *ndev);
+
/**
* xcan_err_interrupt - error frame Isr
* @ndev: net_device pointer
@@ -558,8 +560,9 @@ static void xcan_err_interrupt(struct net_device *ndev, u32 isr)
if (isr & XCAN_IXR_BSOFF_MASK) {
priv->can.state = CAN_STATE_BUS_OFF;
priv->can.can_stats.bus_off++;
- /* Leave device in Config Mode in bus-off state */
- priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_RESET_MASK);
+ /* Re-initialize the whole device in bus-off state */
+ xcan_chip_stop(ndev);
+ xcan_chip_start(ndev);
can_bus_off(ndev);
if (skb)
cf->can_id |= CAN_ERR_BUSOFF;
--
2.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists