lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <1445481048-20789-2-git-send-email-wxt@rock-chips.com> Date: Thu, 22 Oct 2015 10:30:47 +0800 From: Caesar Wang <wxt@...k-chips.com> To: Heiko Stuebner <heiko@...ech.de> Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>, dianders@...omium.org, Eduardo Valentin <edubezval@...il.com>, Caesar Wang <wxt@...k-chips.com>, devicetree@...r.kernel.org, linux-pm@...r.kernel.org, Kumar Gala <galak@...eaurora.org>, linux-kernel@...r.kernel.org, Ian Campbell <ijc+devicetree@...lion.org.uk>, linux-rockchip@...ts.infradead.org, Rob Herring <robh+dt@...nel.org>, linux-arm-kernel@...ts.infradead.org, Pawel Moll <pawel.moll@....com>, Zhang Rui <rui.zhang@...el.com>, Mark Rutland <mark.rutland@....com> Subject: [RESEND PATCH v2 1/2] dt-bindings: rockchip-thermal: Add the "init" pinctrl in this document The "init" pinctrl is defined we'll set pinctrl to this state before probe and then "default" after probe. Add the "init" pinctrl as the OTP gpio state, since we need switch the pin to gpio state before the TSADC controller is reset. As I know, the TSADC controller is reset, the tshut polarity will be a *low* signal in a short period of time for some devices. Says: The TSADC get the temperature on rockchip thermal. If T(current temperature) < (setting temperature), the OTP output the *high* signal. If T(current temperature) > (setting temperature), the OTP output the *low* Signal. In some cases, the OTP pin is connected to the PMIC, maybe the PMIC can accept the reset response time to avoid this issue. In other words, the system will be always reboot if we make the OTP pin is connected the others IC to control the power. Signed-off-by: Caesar Wang <wxt@...k-chips.com> Reviewed-by: Douglas Anderson <dianders@...omium.org> --- Changes in v2: - Add the 'init' pinctrl more decription in commit. - Fix the subject to make more obvious in PATCH[1/2] - Resend this patch v2 since fix the subject to be specific. Changes in v1: - As the Doug comments, add the 'init' property to sync document. Documentation/devicetree/bindings/thermal/rockchip-thermal.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt index ef802de..28e84f7 100644 --- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt @@ -27,8 +27,9 @@ tsadc: tsadc@...80000 { clock-names = "tsadc", "apb_pclk"; resets = <&cru SRST_TSADC>; reset-names = "tsadc-apb"; - pinctrl-names = "default"; - pinctrl-0 = <&otp_out>; + pinctrl-names = "init", "default"; + pinctrl-0 = <&otp_gpio>; + pinctrl-1 = <&otp_out>; #thermal-sensor-cells = <1>; rockchip,hw-tshut-temp = <95000>; rockchip,hw-tshut-mode = <0>; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists