[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <562AB6D0.7060807@hauke-m.de>
Date: Sat, 24 Oct 2015 00:38:08 +0200
From: Hauke Mehrtens <hauke@...ke-m.de>
To: Jon Mason <jonmason@...adcom.com>
Cc: Kapil Hali <kapilh@...adcom.com>, Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Russell King <linux@....linux.org.uk>,
Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
Florian Fainelli <f.fainelli@...il.com>,
Gregory Fong <gregory.0xf0@...il.com>,
Lee Jones <lee@...nel.org>, Heiko Stuebner <heiko@...ech.de>,
Kever Yang <kever.yang@...k-chips.com>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Olof Johansson <olof@...om.net>,
Paul Walmsley <paul@...an.com>,
Linus Walleij <linus.walleij@...aro.org>,
Chen-Yu Tsai <wens@...e.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
bcm-kernel-feedback-list@...adcom.com
Subject: Re: [RFC] ARM: BCM: Add SMP support for Broadcom 4708
On 10/15/2015 08:14 PM, Jon Mason wrote:
> ARM: BCM: Add SMP support for Broadcom 4708
>
> Add SMP support for Broadcom's 4708 SoCs.
I tested this and it works on my device, it is also in OpenWrt now:
https://dev.openwrt.org/browser/trunk/target/linux/bcm53xx/patches-4.1/131-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch?rev=47247
>
> Signed-off-by: Jon Mason <jonmason@...adcom.com>
> ---
> arch/arm/boot/dts/bcm4708.dtsi | 2 ++
> arch/arm/boot/dts/bcm94708.dts | 2 +-
> arch/arm/mach-bcm/Kconfig | 1 +
> arch/arm/mach-bcm/Makefile | 3 +++
> 4 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi
> index 31141e8..22a41df 100644
> --- a/arch/arm/boot/dts/bcm4708.dtsi
> +++ b/arch/arm/boot/dts/bcm4708.dtsi
> @@ -15,6 +15,8 @@
> cpus {
> #address-cells = <1>;
> #size-cells = <0>;
> + enable-method = "brcm,bcm-nsp-smp";
> + secondary-boot-reg = <0xffff0400>;
>
> cpu@0 {
> device_type = "cpu";
> diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
> index f60bb1d..49682d6 100644
> --- a/arch/arm/boot/dts/bcm94708.dts
> +++ b/arch/arm/boot/dts/bcm94708.dts
> @@ -32,7 +32,7 @@
>
> /dts-v1/;
>
> -#include "bcm5301x.dtsi"
> +#include "bcm4708.dtsi"
This is already changed in the patch adding this file.
>
> / {
> model = "NorthStar SVK (BCM94708)";
> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
> index 2e9dbb5..4fc8fa3 100644
> --- a/arch/arm/mach-bcm/Kconfig
> +++ b/arch/arm/mach-bcm/Kconfig
> @@ -54,6 +54,7 @@ config ARCH_BCM_NSP
> config ARCH_BCM_5301X
> bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
> select ARCH_BCM_IPROC
> + select HAVE_SMP
probably this is also needed:
select ARM_ERRATA_764369 if SMP
The CPU should be affected by this issue.
> help
> Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
>
> diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
> index 36a4ca30..3ca1cf1 100644
> --- a/arch/arm/mach-bcm/Makefile
> +++ b/arch/arm/mach-bcm/Makefile
> @@ -43,6 +43,9 @@ obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o
>
> # BCM5301X
> obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o
> +ifeq ($(CONFIG_ARCH_BCM_5301X),y)
> +obj-$(CONFIG_SMP) += headsmp.o platsmp.o
> +endif
>
> # BCM63XXx
> ifeq ($(CONFIG_ARCH_BCM_63XX),y)
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists