[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <562E1FB5.1000600@samsung.com>
Date: Mon, 26 Oct 2015 18:12:29 +0530
From: Alim Akhtar <alim.akhtar@...sung.com>
To: Lee Jones <lee.jones@...aro.org>
Cc: broonie@...nel.org, k.kozlowski@...sung.com,
mturquette@...libre.com, linux-samsung-soc@...r.kernel.org,
linux-clk@...r.kernel.org, rtc-linux@...glegroups.com,
linux-kernel@...r.kernel.org,
Thomas Abraham <thomas.ab@...sung.com>,
devicetree@...r.kernel.org
Subject: Re: [PATCH v2 1/5] dt-bindings: mfd: s2mps11: add documentation for
s2mps15 PMIC
On 10/26/2015 04:39 PM, Lee Jones wrote:
> On Mon, 26 Oct 2015, Alim Akhtar wrote:
>
>> From: Thomas Abraham <thomas.ab@...sung.com>
>>
>> Add dt-binding documentation for s2mps15 PMIC device. The s2mps15 device
>> is similar to s2mps11/14 PMIC device and has 27 LDO and 10 buck regulators.
>>
>> Cc: devicetree@...r.kernel.org
>> Signed-off-by: Thomas Abraham <thomas.ab@...sung.com>
>> Signed-off-by: Alim Akhtar <alim.akhtar@...sung.com>
>> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
>> ---
>> Documentation/devicetree/bindings/mfd/s2mps11.txt | 23 ++++++++++++++-------
>> 1 file changed, 15 insertions(+), 8 deletions(-)
>
> Nothing to controversial here.
>
> For my own reference:
> Acked-by: Lee Jones <lee.jones@...aro.org>
>
Thanks, will send v3 of this series.
>> diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
>> index 890f0b0e1643..c0427c9d0886 100644
>> --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
>> +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
>> @@ -1,5 +1,5 @@
>>
>> -* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator
>> +* Samsung S2MPS11/13/14/15 and S2MPU02 Voltage and Current Regulator
>>
>> The Samsung S2MPS11 is a multi-function device which includes voltage and
>> current regulators, RTC, charger controller and other sub-blocks. It is
>> @@ -7,8 +7,12 @@ interfaced to the host controller using an I2C interface. Each sub-block is
>> addressed by the host system using different I2C slave addresses.
>>
>> Required properties:
>> -- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic"
>> - or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic".
>> +- compatible: Should be one of the following
>> + - "samsung,s2mps11-pmic"
>> + - "samsung,s2mps13-pmic"
>> + - "samsung,s2mps14-pmic"
>> + - "samsung,s2mps15-pmic"
>> + - "samsung,s2mpu02-pmic".
>> - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
>>
>> Optional properties:
>> @@ -24,7 +28,7 @@ Optional properties:
>> unwanted buck warm reset (setting buck voltages to default values).
>>
>> Optional nodes:
>> -- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768
>> +- clocks: s2mps11, s2mps13, s2mps15 and s5m8767 provide three(AP/CP/BT) buffered 32.768
>> KHz outputs, so to register these as clocks with common clock framework
>> instantiate a sub-node named "clocks". It uses the common clock binding
>> documented in :
>> @@ -37,12 +41,13 @@ Optional nodes:
>> the clock which they consume.
>> Clock ID Devices
>> ----------------------------------------------------------
>> - 32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S5M8767
>> - 32KhzCP 1 S2MPS11, S2MPS13, S5M8767
>> - 32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S5M8767
>> + 32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767
>> + 32KhzCP 1 S2MPS11, S2MPS13, S2MPS15, S5M8767
>> + 32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767
>>
>> - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
>> - "samsung,s2mps14-clk", "samsung,s5m8767-clk"
>> + "samsung,s2mps14-clk", "samsung,s2mps15-clk",
>> + "samsung,s5m8767-clk"
>>
>> - regulators: The regulators of s2mps11 that have to be instantiated should be
>> included in a sub-node named 'regulators'. Regulator nodes included in this
>> @@ -90,6 +95,7 @@ as per the datasheet of s2mps11.
>> - S2MPS11: 1 to 38
>> - S2MPS13: 1 to 40
>> - S2MPS14: 1 to 25
>> + - S2MPS15: 1 to 27
>> - S2MPU02: 1 to 28
>> - Example: LDO1, LDO2, LDO28
>> - BUCKn
>> @@ -97,6 +103,7 @@ as per the datasheet of s2mps11.
>> - S2MPS11: 1 to 10
>> - S2MPS13: 1 to 10
>> - S2MPS14: 1 to 5
>> + - S2MPS15: 1 to 10
>> - S2MPU02: 1 to 7
>> - Example: BUCK1, BUCK2, BUCK9
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists