| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1445868903-183817-19-git-send-email-john.garry@huawei.com>
Date: Mon, 26 Oct 2015 22:14:49 +0800
From: John Garry <john.garry@...wei.com>
To: <JBottomley@...n.com>, <robh+dt@...nel.org>, <pawel.moll@....com>,
<mark.rutland@....com>, <ijc+devicetree@...lion.org.uk>,
<galak@...eaurora.org>, <arnd@...db.de>
CC: <linux-scsi@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linuxarm@...wei.com>,
<john.garry2@...l.dcu.ie>, <hare@...e.de>, <xuwei5@...ilicon.com>,
<zhangfei.gao@...aro.org>, John Garry <john.garry@...wei.com>
Subject: [PATCH v2 18/32] scsi: hisi_sas: add v1 hardware register definitions
Signed-off-by: John Garry <john.garry@...wei.com>
---
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 389 +++++++++++++++++++++++++++++++++
1 file changed, 389 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 011bfe3..d1c9c27 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -12,10 +12,399 @@
#include "hisi_sas.h"
#define DRV_NAME "hisi_sas_v1_hw"
+/* global registers need init*/
+#define DLVRY_QUEUE_ENABLE 0x0
+#define IOST_BASE_ADDR_LO 0x8
+#define IOST_BASE_ADDR_HI 0xc
+#define ITCT_BASE_ADDR_LO 0x10
+#define ITCT_BASE_ADDR_HI 0x14
+#define BROKEN_MSG_ADDR_LO 0x18
+#define BROKEN_MSG_ADDR_HI 0x1c
+#define PHY_CONTEXT 0x20
+#define PHY_STATE 0x24
+#define PHY_PORT_NUM_MA 0x28
+#define PORT_STATE 0x2c
+#define PHY_CONN_RATE 0x30
+#define HGC_TRANS_TASK_CNT_LIMIT 0x38
+#define AXI_AHB_CLK_CFG 0x3c
+#define HGC_SAS_TXFAIL_RETRY_CTRL 0x84
+#define HGC_GET_ITV_TIME 0x90
+#define DEVICE_MSG_WORK_MODE 0x94
+#define I_T_NEXUS_LOSS_TIME 0xa0
+#define BUS_INACTIVE_LIMIT_TIME 0xa8
+#define REJECT_TO_OPEN_LIMIT_TIME 0xac
+#define CFG_AGING_TIME 0xbc
+#define CFG_AGING_TIME_ITCT_REL_OFF 0
+#define CFG_AGING_TIME_ITCT_REL_MSK (0x1 << CFG_AGING_TIME_ITCT_REL_OFF)
+#define HGC_DFX_CFG2 0xc0
+#define FIS_LIST_BADDR_L 0xc4
+#define CFG_1US_TIMER_TRSH 0xcc
+#define CFG_SAS_CONFIG 0xd4
+#define HGC_IOST_ECC_ADDR 0x140
+#define HGC_IOST_ECC_ADDR_BAD_OFF 16
+#define HGC_IOST_ECC_ADDR_BAD_MSK (0x3ff << HGC_IOST_ECC_ADDR_BAD_OFF)
+#define HGC_DQ_ECC_ADDR 0x144
+#define HGC_DQ_ECC_ADDR_BAD_OFF 16
+#define HGC_DQ_ECC_ADDR_BAD_MSK (0xfff << HGC_DQ_ECC_ADDR_BAD_OFF)
+#define HGC_INVLD_DQE_INFO 0x148
+#define HGC_INVLD_DQE_INFO_DQ_OFF 0
+#define HGC_INVLD_DQE_INFO_DQ_MSK (0xffff << HGC_INVLD_DQE_INFO_DQ_OFF)
+#define HGC_INVLD_DQE_INFO_TYPE_OFF 16
+#define HGC_INVLD_DQE_INFO_TYPE_MSK (0x1 << HGC_INVLD_DQE_INFO_TYPE_OFF)
+#define HGC_INVLD_DQE_INFO_FORCE_OFF 17
+#define HGC_INVLD_DQE_INFO_FORCE_MSK (0x1 << HGC_INVLD_DQE_INFO_FORCE_OFF)
+#define HGC_INVLD_DQE_INFO_PHY_OFF 18
+#define HGC_INVLD_DQE_INFO_PHY_MSK (0x1 << HGC_INVLD_DQE_INFO_PHY_OFF)
+#define HGC_INVLD_DQE_INFO_ABORT_OFF 19
+#define HGC_INVLD_DQE_INFO_ABORT_MSK (0x1 << HGC_INVLD_DQE_INFO_ABORT_OFF)
+#define HGC_INVLD_DQE_INFO_IPTT_OF_OFF 20
+#define HGC_INVLD_DQE_INFO_IPTT_OF_MSK (0x1 << HGC_INVLD_DQE_INFO_IPTT_OF_OFF)
+#define HGC_INVLD_DQE_INFO_SSP_ERR_OFF 21
+#define HGC_INVLD_DQE_INFO_SSP_ERR_MSK (0x1 << HGC_INVLD_DQE_INFO_SSP_ERR_OFF)
+#define HGC_INVLD_DQE_INFO_OFL_OFF 22
+#define HGC_INVLD_DQE_INFO_OFL_MSK (0x1 << HGC_INVLD_DQE_INFO_OFL_OFF)
+#define HGC_ITCT_ECC_ADDR 0x150
+#define HGC_ITCT_ECC_ADDR_BAD_OFF 16
+#define HGC_ITCT_ECC_ADDR_BAD_MSK (0x3ff << HGC_ITCT_ECC_ADDR_BAD_OFF)
+#define HGC_AXI_FIFO_ERR_INFO 0x154
+#define INT_COAL_EN 0x1bc
+#define OQ_INT_COAL_TIME 0x1c0
+#define OQ_INT_COAL_CNT 0x1c4
+#define ENT_INT_COAL_TIME 0x1c8
+#define ENT_INT_COAL_CNT 0x1cc
+#define OQ_INT_SRC 0x1d0
+#define OQ_INT_SRC_MSK 0x1d4
+#define ENT_INT_SRC1 0x1d8
+#define ENT_INT_SRC2 0x1dc
+#define ENT_INT_SRC2_DQ_CFG_ERR_OFF 25
+#define ENT_INT_SRC2_DQ_CFG_ERR_MSK (0x1 << ENT_INT_SRC2_DQ_CFG_ERR_OFF)
+#define ENT_INT_SRC2_CQ_CFG_ERR_OFF 27
+#define ENT_INT_SRC2_CQ_CFG_ERR_MSK (0x1 << ENT_INT_SRC2_CQ_CFG_ERR_OFF)
+#define ENT_INT_SRC2_AXI_WRONG_INT_OFF 28
+#define ENT_INT_SRC2_AXI_WRONG_INT_MSK (0x1 << ENT_INT_SRC2_AXI_WRONG_INT_OFF)
+#define ENT_INT_SRC2_AXI_OVERLF_INT_OFF 29
+#define ENT_INT_SRC2_AXI_OVERLF_INT_MSK (0x1 << ENT_INT_SRC2_AXI_OVERLF_INT_OFF)
+#define ENT_INT_SRC_MSK1 0x1e0
+#define ENT_INT_SRC_MSK2 0x1e4
+#define SAS_ECC_INTR 0x1e8
+#define SAS_ECC_INTR_DQ_ECC1B_OFF 0
+#define SAS_ECC_INTR_DQ_ECC1B_MSK (0x1 << SAS_ECC_INTR_DQ_ECC1B_OFF)
+#define SAS_ECC_INTR_DQ_ECCBAD_OFF 1
+#define SAS_ECC_INTR_DQ_ECCBAD_MSK (0x1 << SAS_ECC_INTR_DQ_ECCBAD_OFF)
+#define SAS_ECC_INTR_IOST_ECC1B_OFF 2
+#define SAS_ECC_INTR_IOST_ECC1B_MSK (0x1 << SAS_ECC_INTR_IOST_ECC1B_OFF)
+#define SAS_ECC_INTR_IOST_ECCBAD_OFF 3
+#define SAS_ECC_INTR_IOST_ECCBAD_MSK (0x1 << SAS_ECC_INTR_IOST_ECCBAD_OFF)
+#define SAS_ECC_INTR_ITCT_ECC1B_OFF 4
+#define SAS_ECC_INTR_ITCT_ECC1B_MSK (0x1 << SAS_ECC_INTR_ITCT_ECC1B_OFF)
+#define SAS_ECC_INTR_ITCT_ECCBAD_OFF 5
+#define SAS_ECC_INTR_ITCT_ECCBAD_MSK (0x1 << SAS_ECC_INTR_ITCT_ECCBAD_OFF)
+#define SAS_ECC_INTR_MSK 0x1ec
+#define HGC_ERR_STAT_EN 0x238
+#define DLVRY_Q_0_BASE_ADDR_LO 0x260
+#define DLVRY_Q_0_BASE_ADDR_HI 0x264
+#define DLVRY_Q_0_DEPTH 0x268
+#define DLVRY_Q_0_WR_PTR 0x26c
+#define DLVRY_Q_0_RD_PTR 0x270
+#define COMPL_Q_0_BASE_ADDR_LO 0x4e0
+#define COMPL_Q_0_BASE_ADDR_HI 0x4e4
+#define COMPL_Q_0_DEPTH 0x4e8
+#define COMPL_Q_0_WR_PTR 0x4ec
+#define COMPL_Q_0_RD_PTR 0x4f0
+#define HGC_ECC_ERR 0x7d0
+
+/* phy registers need init */
+#define PORT_BASE (0x800)
+
+#define PHY_CFG (PORT_BASE + 0x0)
+#define PHY_CFG_ENA_OFF 0
+#define PHY_CFG_ENA_MSK (0x1 << PHY_CFG_ENA_OFF)
+#define PHY_CFG_DC_OPT_OFF 2
+#define PHY_CFG_DC_OPT_MSK (0x1 << PHY_CFG_DC_OPT_OFF)
+#define PROG_PHY_LINK_RATE (PORT_BASE + 0xc)
+#define PROG_PHY_LINK_RATE_MAX_OFF 0
+#define PROG_PHY_LINK_RATE_MAX_MSK (0xf << PROG_PHY_LINK_RATE_MAX_OFF)
+#define PROG_PHY_LINK_RATE_MIN_OFF 4
+#define PROG_PHY_LINK_RATE_MIN_MSK (0xf << PROG_PHY_LINK_RATE_MIN_OFF)
+#define PROG_PHY_LINK_RATE_OOB_OFF 8
+#define PROG_PHY_LINK_RATE_OOB_MSK (0xf << PROG_PHY_LINK_RATE_OOB_OFF)
+#define PHY_CTRL (PORT_BASE + 0x14)
+#define PHY_CTRL_RESET_OFF 0
+#define PHY_CTRL_RESET_MSK (0x1 << PHY_CTRL_RESET_OFF)
+#define PHY_RATE_NEGO (PORT_BASE + 0x30)
+#define PHY_PCN (PORT_BASE + 0x44)
+#define SL_TOUT_CFG (PORT_BASE + 0x8c)
+#define SL_CONTROL (PORT_BASE + 0x94)
+#define SL_CONTROL_NOTIFY_EN_OFF 0
+#define SL_CONTROL_NOTIFY_EN_MSK (0x1 << SL_CONTROL_NOTIFY_EN_OFF)
+#define TX_ID_DWORD0 (PORT_BASE + 0x9c)
+#define TX_ID_DWORD1 (PORT_BASE + 0xa0)
+#define TX_ID_DWORD2 (PORT_BASE + 0xa4)
+#define TX_ID_DWORD3 (PORT_BASE + 0xa8)
+#define TX_ID_DWORD4 (PORT_BASE + 0xaC)
+#define TX_ID_DWORD5 (PORT_BASE + 0xb0)
+#define TX_ID_DWORD6 (PORT_BASE + 0xb4)
+#define RX_IDAF_DWORD0 (PORT_BASE + 0xc4)
+#define RX_IDAF_DWORD1 (PORT_BASE + 0xc8)
+#define RX_IDAF_DWORD2 (PORT_BASE + 0xcc)
+#define RX_IDAF_DWORD3 (PORT_BASE + 0xd0)
+#define RX_IDAF_DWORD4 (PORT_BASE + 0xd4)
+#define RX_IDAF_DWORD5 (PORT_BASE + 0xd8)
+#define RX_IDAF_DWORD6 (PORT_BASE + 0xdc)
+#define RXOP_CHECK_CFG_H (PORT_BASE + 0xfc)
+#define DONE_RECEIVED_TIME (PORT_BASE + 0x12c)
+#define CON_CFG_DRIVER (PORT_BASE + 0x130)
+#define PHY_CONFIG2 (PORT_BASE + 0x1a8)
+#define PHY_CONFIG2_FORCE_TXDEEMPH_OFF 3
+#define PHY_CONFIG2_FORCE_TXDEEMPH_MSK (0x1 << PHY_CONFIG2_FORCE_TXDEEMPH_OFF)
+#define PHY_CONFIG2_TX_TRAIN_COMP_OFF 24
+#define PHY_CONFIG2_TX_TRAIN_COMP_MSK (0x1 << PHY_CONFIG2_TX_TRAIN_COMP_OFF)
+#define CHL_INT0 (PORT_BASE + 0x1b0)
+#define CHL_INT0_PHYCTRL_NOTRDY_OFF 0
+#define CHL_INT0_PHYCTRL_NOTRDY_MSK (0x1 << CHL_INT0_PHYCTRL_NOTRDY_OFF)
+#define CHL_INT0_SN_FAIL_NGR_OFF 2
+#define CHL_INT0_SN_FAIL_NGR_MSK (0x1 << CHL_INT0_SN_FAIL_NGR_OFF)
+#define CHL_INT0_DWS_LOST_OFF 4
+#define CHL_INT0_DWS_LOST_MSK (0x1 << CHL_INT0_DWS_LOST_OFF)
+#define CHL_INT0_SL_IDAF_FAIL_OFF 10
+#define CHL_INT0_SL_IDAF_FAIL_MSK (0x1 << CHL_INT0_SL_IDAF_FAIL_OFF)
+#define CHL_INT0_ID_TIMEOUT_OFF 11
+#define CHL_INT0_ID_TIMEOUT_MSK (0x1 << CHL_INT0_ID_TIMEOUT_OFF)
+#define CHL_INT0_SL_OPAF_FAIL_OFF 12
+#define CHL_INT0_SL_OPAF_FAIL_MSK (0x1 << CHL_INT0_SL_OPAF_FAIL_OFF)
+#define CHL_INT0_SL_PS_FAIL_OFF 21
+#define CHL_INT0_SL_PS_FAIL_MSK (0x1 << CHL_INT0_SL_PS_FAIL_OFF)
+#define CHL_INT1 (PORT_BASE + 0x1b4)
+#define CHL_INT2 (PORT_BASE + 0x1b8)
+#define CHL_INT2_SL_RX_BC_ACK_OFF 2
+#define CHL_INT2_SL_RX_BC_ACK_MSK (0x1 << CHL_INT2_SL_RX_BC_ACK_OFF)
+#define CHL_INT2_SL_PHY_ENA_OFF 6
+#define CHL_INT2_SL_PHY_ENA_MSK (0x1 << CHL_INT2_SL_PHY_ENA_OFF)
+#define CHL_INT0_MSK (PORT_BASE + 0x1bc)
+#define CHL_INT0_MSK_PHYCTRL_NOTRDY_OFF 0
+#define CHL_INT0_MSK_PHYCTRL_NOTRDY_MSK (0x1 << CHL_INT0_MSK_PHYCTRL_NOTRDY_OFF)
+#define CHL_INT1_MSK (PORT_BASE + 0x1c0)
+#define CHL_INT2_MSK (PORT_BASE + 0x1c4)
+#define CHL_INT_COAL_EN (PORT_BASE + 0x1d0)
+#define DMA_TX_STATUS (PORT_BASE + 0x2d0)
+#define DMA_TX_STATUS_BUSY_OFF 0
+#define DMA_TX_STATUS_BUSY_MSK (0x1 << DMA_TX_STATUS_BUSY_OFF)
+#define DMA_RX_STATUS (PORT_BASE + 0x2e8)
+#define DMA_RX_STATUS_BUSY_OFF 0
+#define DMA_RX_STATUS_BUSY_MSK (0x1 << DMA_RX_STATUS_BUSY_OFF)
+
+#define AXI_CFG 0x5100
+#define RESET_VALUE 0x7ffff
+
+/* HW dma structures */
+/* Delivery queue header */
+/* dw0 */
+#define CMD_HDR_RESP_REPORT_OFF 5
+#define CMD_HDR_RESP_REPORT_MSK 0x20
+#define CMD_HDR_TLR_CTRL_OFF 6
+#define CMD_HDR_TLR_CTRL_MSK 0xc0
+#define CMD_HDR_PORT_OFF 17
+#define CMD_HDR_PORT_MSK 0xe0000
+#define CMD_HDR_PRIORITY_OFF 27
+#define CMD_HDR_PRIORITY_MSK 0x8000000
+#define CMD_HDR_MODE_OFF 28
+#define CMD_HDR_MODE_MSK 0x10000000
+#define CMD_HDR_CMD_OFF 29
+#define CMD_HDR_CMD_MSK 0xe0000000
+/* dw1 */
+#define CMD_HDR_VERIFY_DTL_OFF 10
+#define CMD_HDR_VERIFY_DTL_MSK 0x400
+#define CMD_HDR_SSP_FRAME_TYPE_OFF 13
+#define CMD_HDR_SSP_FRAME_TYPE_MSK 0xe000
+#define CMD_HDR_DEVICE_ID_OFF 16
+#define CMD_HDR_DEVICE_ID_MSK 0xffff0000
+/* dw2 */
+#define CMD_HDR_CFL_OFF 0
+#define CMD_HDR_CFL_MSK 0x1ff
+#define CMD_HDR_MRFL_OFF 15
+#define CMD_HDR_MRFL_MSK 0xff8000
+#define CMD_HDR_FIRST_BURST_OFF 25
+#define CMD_HDR_FIRST_BURST_MSK 0x2000000
+/* dw3 */
+#define CMD_HDR_IPTT_OFF 0
+#define CMD_HDR_IPTT_MSK 0xffff
+/* dw6 */
+#define CMD_HDR_DATA_SGL_LEN_OFF 16
+#define CMD_HDR_DATA_SGL_LEN_MSK 0xffff0000
+
+/* Completion header */
+#define CMPLT_HDR_IPTT_OFF 0
+#define CMPLT_HDR_IPTT_MSK (0xffff << CMPLT_HDR_IPTT_OFF)
+#define CMPLT_HDR_CMD_CMPLT_OFF 17
+#define CMPLT_HDR_CMD_CMPLT_MSK (0x1 << CMPLT_HDR_CMD_CMPLT_OFF)
+#define CMPLT_HDR_ERR_RCRD_XFRD_OFF 18
+#define CMPLT_HDR_ERR_RCRD_XFRD_MSK (0x1 << CMPLT_HDR_ERR_RCRD_XFRD_OFF)
+#define CMPLT_HDR_RSPNS_XFRD_OFF 19
+#define CMPLT_HDR_RSPNS_XFRD_MSK (0x1 << CMPLT_HDR_RSPNS_XFRD_OFF)
+#define CMPLT_HDR_IO_CFG_ERR_OFF 27
+#define CMPLT_HDR_IO_CFG_ERR_MSK (0x1 << CMPLT_HDR_IO_CFG_ERR_OFF)
+
+/* ITCT header */
+/* qw0 */
+#define ITCT_HDR_DEV_TYPE_OFF 0
+#define ITCT_HDR_DEV_TYPE_MSK (0x3 << ITCT_HDR_DEV_TYPE_OFF)
+#define ITCT_HDR_VALID_OFF 2
+#define ITCT_HDR_VALID_MSK (0x1 << ITCT_HDR_VALID_OFF)
+#define ITCT_HDR_BREAK_REPLY_ENA_OFF 3
+#define ITCT_HDR_BREAK_REPLY_ENA_MSK (0x1 << ITCT_HDR_BREAK_REPLY_ENA_OFF)
+#define ITCT_HDR_AWT_CONTROL_OFF 4
+#define ITCT_HDR_AWT_CONTROL_MSK (0x1 << ITCT_HDR_AWT_CONTROL_OFF)
+#define ITCT_HDR_MAX_CONN_RATE_OFF 5
+#define ITCT_HDR_MAX_CONN_RATE_MSK (0xf << ITCT_HDR_MAX_CONN_RATE_OFF)
+#define ITCT_HDR_VALID_LINK_NUM_OFF 9
+#define ITCT_HDR_VALID_LINK_NUM_MSK (0xf << ITCT_HDR_VALID_LINK_NUM_OFF)
+#define ITCT_HDR_PORT_ID_OFF 13
+#define ITCT_HDR_PORT_ID_MSK (0x7 << ITCT_HDR_PORT_ID_OFF)
+#define ITCT_HDR_SMP_TIMEOUT_OFF 16
+#define ITCT_HDR_SMP_TIMEOUT_MSK (0xffff << ITCT_HDR_SMP_TIMEOUT_OFF)
+#define ITCT_HDR_MAX_BURST_BYTES_OFF 16
+#define ITCT_HDR_MAX_BURST_BYTES_MSK (0xffffffff << \
+ ITCT_MAX_BURST_BYTES_OFF)
+/* qw1 */
+#define ITCT_HDR_MAX_SAS_ADDR_OFF 0
+#define ITCT_HDR_MAX_SAS_ADDR_MSK (0xffffffffffffffff << \
+ ITCT_HDR_MAX_SAS_ADDR_OFF)
+/* qw2 */
+#define ITCT_HDR_IT_NEXUS_LOSS_TL_OFF 0
+#define ITCT_HDR_IT_NEXUS_LOSS_TL_MSK (0xffff << \
+ ITCT_HDR_IT_NEXUS_LOSS_TL_OFF)
+#define ITCT_HDR_BUS_INACTIVE_TL_OFF 16
+#define ITCT_HDR_BUS_INACTIVE_TL_MSK (0xffff << \
+ ITCT_HDR_BUS_INACTIVE_TL_OFF)
+#define ITCT_HDR_MAX_CONN_TL_OFF 32
+#define ITCT_HDR_MAX_CONN_TL_MSK (0xffff << \
+ ITCT_HDR_MAX_CONN_TL_OFF)
+#define ITCT_HDR_REJ_OPEN_TL_OFF 48
+#define ITCT_HDR_REJ_OPEN_TL_MSK (0xffff << \
+ ITCT_REJ_OPEN_TL_OFF)
+
+/* Err record header */
+#define ERR_HDR_DMA_TX_ERR_TYPE_OFF 0
+#define ERR_HDR_DMA_TX_ERR_TYPE_MSK (0xffff << ERR_HDR_DMA_TX_ERR_TYPE_OFF)
+#define ERR_HDR_DMA_RX_ERR_TYPE_OFF 16
+#define ERR_HDR_DMA_RX_ERR_TYPE_MSK (0xffff << ERR_HDR_DMA_RX_ERR_TYPE_OFF)
struct hisi_sas_complete_v1_hdr {
__le32 data;
};
+
+enum {
+ HISI_SAS_PHY_BCAST_ACK = 0,
+ HISI_SAS_PHY_SL_PHY_ENABLED,
+ HISI_SAS_PHY_INT_ABNORMAL,
+ HISI_SAS_PHY_INT_NR
+};
+
+enum {
+ DMA_TX_ERR_BASE = 0x0,
+ DMA_RX_ERR_BASE = 0x100,
+ TRANS_TX_FAIL_BASE = 0x200,
+ TRANS_RX_FAIL_BASE = 0x300,
+
+ /* dma tx */
+ DMA_TX_DIF_CRC_ERR = DMA_TX_ERR_BASE, /* 0x0 */
+ DMA_TX_DIF_APP_ERR, /* 0x1 */
+ DMA_TX_DIF_RPP_ERR, /* 0x2 */
+ DMA_TX_AXI_BUS_ERR, /* 0x3 */
+ DMA_TX_DATA_SGL_OVERFLOW_ERR, /* 0x4 */
+ DMA_TX_DIF_SGL_OVERFLOW_ERR, /* 0x5 */
+ DMA_TX_UNEXP_XFER_RDY_ERR, /* 0x6 */
+ DMA_TX_XFER_RDY_OFFSET_ERR, /* 0x7 */
+ DMA_TX_DATA_UNDERFLOW_ERR, /* 0x8 */
+ DMA_TX_XFER_RDY_LENGTH_OVERFLOW_ERR, /* 0x9 */
+
+ /* dma rx */
+ DMA_RX_BUFFER_ECC_ERR = DMA_RX_ERR_BASE, /* 0x100 */
+ DMA_RX_DIF_CRC_ERR, /* 0x101 */
+ DMA_RX_DIF_APP_ERR, /* 0x102 */
+ DMA_RX_DIF_RPP_ERR, /* 0x103 */
+ DMA_RX_RESP_BUFFER_OVERFLOW_ERR, /* 0x104 */
+ DMA_RX_AXI_BUS_ERR, /* 0x105 */
+ DMA_RX_DATA_SGL_OVERFLOW_ERR, /* 0x106 */
+ DMA_RX_DIF_SGL_OVERFLOW_ERR, /* 0x107 */
+ DMA_RX_DATA_OFFSET_ERR, /* 0x108 */
+ DMA_RX_UNEXP_RX_DATA_ERR, /* 0x109 */
+ DMA_RX_DATA_OVERFLOW_ERR, /* 0x10a */
+ DMA_RX_DATA_UNDERFLOW_ERR, /* 0x10b */
+ DMA_RX_UNEXP_RETRANS_RESP_ERR, /* 0x10c */
+
+ /* trans tx */
+ TRANS_TX_RSVD0_ERR = TRANS_TX_FAIL_BASE, /* 0x200 */
+ TRANS_TX_PHY_NOT_ENABLE_ERR, /* 0x201 */
+ TRANS_TX_OPEN_REJCT_WRONG_DEST_ERR, /* 0x202 */
+ TRANS_TX_OPEN_REJCT_ZONE_VIOLATION_ERR, /* 0x203 */
+ TRANS_TX_OPEN_REJCT_BY_OTHER_ERR, /* 0x204 */
+ TRANS_TX_RSVD1_ERR, /* 0x205 */
+ TRANS_TX_OPEN_REJCT_AIP_TIMEOUT_ERR, /* 0x206 */
+ TRANS_TX_OPEN_REJCT_STP_BUSY_ERR, /* 0x207 */
+ TRANS_TX_OPEN_REJCT_PROTOCOL_NOT_SUPPORT_ERR, /* 0x208 */
+ TRANS_TX_OPEN_REJCT_RATE_NOT_SUPPORT_ERR, /* 0x209 */
+ TRANS_TX_OPEN_REJCT_BAD_DEST_ERR, /* 0x20a */
+ TRANS_TX_OPEN_BREAK_RECEIVE_ERR, /* 0x20b */
+ TRANS_TX_LOW_PHY_POWER_ERR, /* 0x20c */
+ TRANS_TX_OPEN_REJCT_PATHWAY_BLOCKED_ERR, /* 0x20d */
+ TRANS_TX_OPEN_TIMEOUT_ERR, /* 0x20e */
+ TRANS_TX_OPEN_REJCT_NO_DEST_ERR, /* 0x20f */
+ TRANS_TX_OPEN_RETRY_ERR, /* 0x210 */
+ TRANS_TX_RSVD2_ERR, /* 0x211 */
+ TRANS_TX_BREAK_TIMEOUT_ERR, /* 0x212 */
+ TRANS_TX_BREAK_REQUEST_ERR, /* 0x213 */
+ TRANS_TX_BREAK_RECEIVE_ERR, /* 0x214 */
+ TRANS_TX_CLOSE_TIMEOUT_ERR, /* 0x215 */
+ TRANS_TX_CLOSE_NORMAL_ERR, /* 0x216 */
+ TRANS_TX_CLOSE_PHYRESET_ERR, /* 0x217 */
+ TRANS_TX_WITH_CLOSE_DWS_TIMEOUT_ERR, /* 0x218 */
+ TRANS_TX_WITH_CLOSE_COMINIT_ERR, /* 0x219 */
+ TRANS_TX_NAK_RECEIVE_ERR, /* 0x21a */
+ TRANS_TX_ACK_NAK_TIMEOUT_ERR, /* 0x21b */
+ TRANS_TX_CREDIT_TIMEOUT_ERR, /* 0x21c */
+ TRANS_TX_IPTT_CONFLICT_ERR, /* 0x21d */
+ TRANS_TX_TXFRM_TYPE_ERR, /* 0x21e */
+ TRANS_TX_TXSMP_LENGTH_ERR, /* 0x21f */
+
+ /* trans rx */
+ TRANS_RX_FRAME_CRC_ERR = TRANS_RX_FAIL_BASE, /* 0x300 */
+ TRANS_RX_FRAME_DONE_ERR, /* 0x301 */
+ TRANS_RX_FRAME_ERRPRM_ERR, /* 0x302 */
+ TRANS_RX_FRAME_NO_CREDIT_ERR, /* 0x303 */
+ TRANS_RX_RSVD0_ERR, /* 0x304 */
+ TRANS_RX_FRAME_OVERRUN_ERR, /* 0x305 */
+ TRANS_RX_FRAME_NO_EOF_ERR, /* 0x306 */
+ TRANS_RX_LINK_BUF_OVERRUN_ERR, /* 0x307 */
+ TRANS_RX_BREAK_TIMEOUT_ERR, /* 0x308 */
+ TRANS_RX_BREAK_REQUEST_ERR, /* 0x309 */
+ TRANS_RX_BREAK_RECEIVE_ERR, /* 0x30a */
+ TRANS_RX_CLOSE_TIMEOUT_ERR, /* 0x30b */
+ TRANS_RX_CLOSE_NORMAL_ERR, /* 0x30c */
+ TRANS_RX_CLOSE_PHYRESET_ERR, /* 0x30d */
+ TRANS_RX_WITH_CLOSE_DWS_TIMEOUT_ERR, /* 0x30e */
+ TRANS_RX_WITH_CLOSE_COMINIT_ERR, /* 0x30f */
+ TRANS_RX_DATA_LENGTH0_ERR, /* 0x310 */
+ TRANS_RX_BAD_HASH_ERR, /* 0x311 */
+ TRANS_RX_XRDY_ZERO_ERR, /* 0x312 */
+ TRANS_RX_SSP_FRAME_LEN_ERR, /* 0x313 */
+ TRANS_RX_TRANS_RX_RSVD1_ERR, /* 0x314 */
+ TRANS_RX_NO_BALANCE_ERR, /* 0x315 */
+ TRANS_RX_TRANS_RX_RSVD2_ERR, /* 0x316 */
+ TRANS_RX_TRANS_RX_RSVD3_ERR, /* 0x317 */
+ TRANS_RX_BAD_FRAME_TYPE_ERR, /* 0x318 */
+ TRANS_RX_SMP_FRAME_LEN_ERR, /* 0x319 */
+ TRANS_RX_SMP_RESP_TIMEOUT_ERR, /* 0x31a */
+};
+
+#define HISI_SAS_PHY_MAX_INT_NR (HISI_SAS_PHY_INT_NR * HISI_SAS_MAX_PHYS)
+#define HISI_SAS_CQ_MAX_INT_NR (HISI_SAS_MAX_QUEUES)
+#define HISI_SAS_FATAL_INT_NR (2)
+
+#define HISI_SAS_MAX_INT_NR \
+ (HISI_SAS_PHY_MAX_INT_NR + HISI_SAS_CQ_MAX_INT_NR +\
+ HISI_SAS_FATAL_INT_NR)
+
static const struct hisi_sas_hw hisi_sas_v1_hw = {
.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists