linux-kernel - [PATCH 03/10] pwm: sunxi: Yield some time to the pwm-block to become ready

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1445895161-2317-4-git-send-email-o.schinagl@ultimaker.com>
Date:	Mon, 26 Oct 2015 22:32:34 +0100
From:	Olliver Schinagl <o.schinagl@...imaker.com>
To:	Olliver Schinagl <oliver@...inagl.nl>,
	Thierry Reding <thierry.reding@...il.com>,
	Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Joachim Eastwood <manabian@...il.com>,
	Maxime Ripard <maxime.ripard@...e-electrons.com>,
	Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Cc:	Olliver Schinagl <oliver+list@...inagl.nl>,
	linux-pwm@...r.kernel.org, devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	Olliver Schinagl <o.schinagl@...imaker.com>
Subject: [PATCH 03/10] pwm: sunxi: Yield some time to the pwm-block to become ready

The pwm-block of some of the sunxi chips feature a 'ready' flag to
indicate the software that it is ready for new commands.

Right now, when we call pwm_config and set the period, we write the
values to the registers, and turn off the clock to the IP. Because of
this, the hardware does not have time to configure the hardware and set
the 'ready' flag.

By running the clock just before making new changes and before checking
if the hardware is ready, the hardware has time to reconfigure itself
and set the clear the flag appropriately.

Signed-off-by: Olliver Schinagl <o.schinagl@...imaker.com>
---
 drivers/pwm/pwm-sun4i.c | 43 +++++++++++++++++++++++++------------------
 1 file changed, 25 insertions(+), 18 deletions(-)

diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
index 58ff424..4d84d9d 100644
--- a/drivers/pwm/pwm-sun4i.c
+++ b/drivers/pwm/pwm-sun4i.c
@@ -104,6 +104,22 @@ static int sun4i_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	u64 clk_rate, div = 0;
 	unsigned int prescaler = 0;
 	int err;
+	int ret = 0;
+
+	/* Let the PWM hardware run before making any changes. We do this to
+	 * allow the hardware to have some time to clear the 'ready' flag.
+	 */
+	err = clk_prepare_enable(sun4i_pwm->clk);
+	if (err) {
+		dev_err(chip->dev, "failed to enable PWM clock\n");
+		return err;
+	}
+	spin_lock(&sun4i_pwm->ctrl_lock);
+	val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
+	clk_gate = val & BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
+	val |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
+	sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG);
+	spin_unlock(&sun4i_pwm->ctrl_lock);
 
 	clk_rate = clk_get_rate(sun4i_pwm->clk);
 
@@ -136,7 +152,9 @@ static int sun4i_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 
 		if (div - 1 > PWM_PRD_MASK) {
 			dev_err(chip->dev, "period exceeds the maximum value\n");
-			return -EINVAL;
+			ret = -EINVAL;
+			spin_lock(&sun4i_pwm->ctrl_lock);
+			goto out;
 		}
 	}
 
@@ -145,26 +163,14 @@ static int sun4i_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	do_div(div, period_ns);
 	dty = div;
 
-	err = clk_prepare_enable(sun4i_pwm->clk);
-	if (err) {
-		dev_err(chip->dev, "failed to enable PWM clock\n");
-		return err;
-	}
-
 	spin_lock(&sun4i_pwm->ctrl_lock);
 	val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
-
 	if (sun4i_pwm->data->has_rdy && (val & PWM_RDY(pwm->hwpwm))) {
-		spin_unlock(&sun4i_pwm->ctrl_lock);
-		clk_disable_unprepare(sun4i_pwm->clk);
-		return -EBUSY;
-	}
-
-	clk_gate = val & BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
-	if (clk_gate) {
-		val &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
-		sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG);
+		ret = -EBUSY;
+		goto out;
 	}
+	val &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
+	sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG);
 
 	val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
 	val &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm);
@@ -174,6 +180,7 @@ static int sun4i_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	val = (dty & PWM_DTY_MASK) | PWM_PRD(prd);
 	sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm));
 
+out:
 	if (clk_gate) {
 		val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
 		val |= clk_gate;
@@ -183,7 +190,7 @@ static int sun4i_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	spin_unlock(&sun4i_pwm->ctrl_lock);
 	clk_disable_unprepare(sun4i_pwm->clk);
 
-	return 0;
+	return ret;
 }
 
 static int sun4i_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
-- 
2.6.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/