[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1445983102-15490-1-git-send-email-robert.jarzmik@free.fr>
Date: Tue, 27 Oct 2015 22:58:21 +0100
From: Robert Jarzmik <robert.jarzmik@...e.fr>
To: Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>,
Lars-Peter Clausen <lars@...afoo.de>,
Charles Keepax <ckeepax@...nsource.wolfsonmicro.com>
Cc: alsa-devel@...a-project.org, linux-kernel@...r.kernel.org,
patches@...nsource.wolfsonmicro.com,
Robert Jarzmik <robert.jarzmik@...e.fr>
Subject: [PATCH v3 1/2] ASoC: wm9713: convert to regmap
Convert the Wolfson WM9713 to regmap API. This will leverage all the
regmap functions (debug, registers update, etc ...).
As a bonus, this will pave the path to gpio chip introduction, and
devicetree support.
Signed-off-by: Robert Jarzmik <robert.jarzmik@...e.fr>
---
Since v1: fix suspend/resume (that specific part is not tested yet)
Since v2: split out the snd_soc_*() from regmap support
---
sound/soc/codecs/Kconfig | 1 +
sound/soc/codecs/wm9713.c | 182 ++++++++++++++++++++++++++++------------------
2 files changed, 114 insertions(+), 69 deletions(-)
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 0c9733ecd17f..ba306f8f3717 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -879,6 +879,7 @@ config SND_SOC_WM9712
config SND_SOC_WM9713
tristate
+ select REGMAP_AC97
# Amp
config SND_SOC_LM4857
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index 4083a5130cbd..8e2cc1112e40 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -19,6 +19,7 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/device.h>
+#include <linux/regmap.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/ac97_codec.h>
@@ -39,33 +40,15 @@ struct wm9713_priv {
struct mutex lock;
};
-static unsigned int ac97_read(struct snd_soc_codec *codec,
- unsigned int reg);
-static int ac97_write(struct snd_soc_codec *codec,
- unsigned int reg, unsigned int val);
-
-/*
- * WM9713 register cache
- * Reg 0x3c bit 15 is used by touch driver.
- */
-static const u16 wm9713_reg[] = {
- 0x6174, 0x8080, 0x8080, 0x8080,
- 0xc880, 0xe808, 0xe808, 0x0808,
- 0x00da, 0x8000, 0xd600, 0xaaa0,
- 0xaaa0, 0xaaa0, 0x0000, 0x0000,
- 0x0f0f, 0x0040, 0x0000, 0x7f00,
- 0x0405, 0x0410, 0xbb80, 0xbb80,
- 0x0000, 0xbb80, 0x0000, 0x4523,
- 0x0000, 0x2000, 0x7eff, 0xffff,
- 0x0000, 0x0000, 0x0080, 0x0000,
- 0x0000, 0x0000, 0xfffe, 0xffff,
- 0x0000, 0x0000, 0x0000, 0xfffe,
- 0x4000, 0x0000, 0x0000, 0x0000,
- 0xb032, 0x3e00, 0x0000, 0x0000,
- 0x0000, 0x0000, 0x0000, 0x0000,
- 0x0000, 0x0000, 0x0000, 0x0006,
- 0x0001, 0x0000, 0x574d, 0x4c13,
-};
+static unsigned int ac97_read(struct snd_soc_codec *codec, unsigned int reg)
+{
+ return snd_soc_read(codec, reg);
+}
+static int ac97_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int val)
+{
+ return snd_soc_write(codec, reg, val);
+}
#define HPL_MIXER 0
#define HPR_MIXER 1
@@ -674,39 +657,97 @@ static const struct snd_soc_dapm_route wm9713_audio_map[] = {
{"Capture Mono Mux", "Right", "Right Capture Source"},
};
-static unsigned int ac97_read(struct snd_soc_codec *codec,
- unsigned int reg)
+static bool wm9713_readable_reg(struct device *dev, unsigned int reg)
{
- struct wm9713_priv *wm9713 = snd_soc_codec_get_drvdata(codec);
- u16 *cache = codec->reg_cache;
-
- if (reg == AC97_RESET || reg == AC97_GPIO_STATUS ||
- reg == AC97_VENDOR_ID1 || reg == AC97_VENDOR_ID2 ||
- reg == AC97_CD)
- return soc_ac97_ops->read(wm9713->ac97, reg);
- else {
- reg = reg >> 1;
-
- if (reg >= (ARRAY_SIZE(wm9713_reg)))
- return -EIO;
-
- return cache[reg];
+ switch (reg) {
+ case AC97_RESET ... AC97_PCM_SURR_DAC_RATE:
+ case AC97_PCM_LR_ADC_RATE:
+ case AC97_CENTER_LFE_MASTER:
+ case AC97_SPDIF ... AC97_LINE1_LEVEL:
+ case AC97_GPIO_CFG ... 0x5c:
+ case AC97_CODEC_CLASS_REV ... AC97_PCI_SID:
+ case 0x74 ... AC97_VENDOR_ID2:
+ return true;
+ default:
+ return false;
}
}
-static int ac97_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int val)
+static bool wm9713_writeable_reg(struct device *dev, unsigned int reg)
{
- struct wm9713_priv *wm9713 = snd_soc_codec_get_drvdata(codec);
+ switch (reg) {
+ case AC97_VENDOR_ID1:
+ case AC97_VENDOR_ID2:
+ return false;
+ default:
+ return wm9713_readable_reg(dev, reg);
+ }
+}
- u16 *cache = codec->reg_cache;
- soc_ac97_ops->write(wm9713->ac97, reg, val);
- reg = reg >> 1;
- if (reg < (ARRAY_SIZE(wm9713_reg)))
- cache[reg] = val;
+static const struct reg_default wm9713_reg_defaults[] = {
+ { 0x02, 0x8080 }, /* Speaker Output Volume */
+ { 0x04, 0x8080 }, /* Headphone Output Volume */
+ { 0x06, 0x8080 }, /* Out3/OUT4 Volume */
+ { 0x08, 0xc880 }, /* Mono Volume */
+ { 0x0a, 0xe808 }, /* LINEIN Volume */
+ { 0x0c, 0xe808 }, /* DAC PGA Volume */
+ { 0x0e, 0x0808 }, /* MIC PGA Volume */
+ { 0x10, 0x00da }, /* MIC Routing Control */
+ { 0x12, 0x8000 }, /* Record PGA Volume */
+ { 0x14, 0xd600 }, /* Record Routing */
+ { 0x16, 0xaaa0 }, /* PCBEEP Volume */
+ { 0x18, 0xaaa0 }, /* VxDAC Volume */
+ { 0x1a, 0xaaa0 }, /* AUXDAC Volume */
+ { 0x1c, 0x0000 }, /* Output PGA Mux */
+ { 0x1e, 0x0000 }, /* DAC 3D control */
+ { 0x20, 0x0f0f }, /* DAC Tone Control*/
+ { 0x22, 0x0040 }, /* MIC Input Select & Bias */
+ { 0x24, 0x0000 }, /* Output Volume Mapping & Jack */
+ { 0x26, 0x7f00 }, /* Powerdown Ctrl/Stat*/
+ { 0x28, 0x0405 }, /* Extended Audio ID */
+ { 0x2a, 0x0410 }, /* Extended Audio Start/Ctrl */
+ { 0x2c, 0xbb80 }, /* Audio DACs Sample Rate */
+ { 0x2e, 0xbb80 }, /* AUXDAC Sample Rate */
+ { 0x32, 0xbb80 }, /* Audio ADCs Sample Rate */
+ { 0x36, 0x4523 }, /* PCM codec control */
+ { 0x3a, 0x2000 }, /* SPDIF control */
+ { 0x3c, 0xfdff }, /* Powerdown 1 */
+ { 0x3e, 0xffff }, /* Powerdown 2 */
+ { 0x40, 0x0000 }, /* General Purpose */
+ { 0x42, 0x0000 }, /* Fast Power-Up Control */
+ { 0x44, 0x0080 }, /* MCLK/PLL Control */
+ { 0x46, 0x0000 }, /* MCLK/PLL Control */
+ { 0x4c, 0xfffe }, /* GPIO Pin Configuration */
+ { 0x4e, 0xffff }, /* GPIO Pin Polarity / Type */
+ { 0x50, 0x0000 }, /* GPIO Pin Sticky */
+ { 0x52, 0x0000 }, /* GPIO Pin Wake-Up */
+ /* GPIO Pin Status */
+ { 0x56, 0xfffe }, /* GPIO Pin Sharing */
+ { 0x58, 0x4000 }, /* GPIO PullUp/PullDown */
+ { 0x5a, 0x0000 }, /* Additional Functions 1 */
+ { 0x5c, 0x0000 }, /* Additional Functions 2 */
+ { 0x60, 0xb032 }, /* ALC Control */
+ { 0x62, 0x3e00 }, /* ALC / Noise Gate Control */
+ { 0x64, 0x0000 }, /* AUXDAC input control */
+ { 0x74, 0x0000 }, /* Digitiser Reg 1 */
+ { 0x76, 0x0006 }, /* Digitiser Reg 2 */
+ { 0x78, 0x0001 }, /* Digitiser Reg 3 */
+ { 0x7a, 0x0000 }, /* Digitiser Read Back */
+};
- return 0;
-}
+static const struct regmap_config wm9713_regmap_config = {
+ .reg_bits = 16,
+ .reg_stride = 2,
+ .val_bits = 16,
+ .max_register = 0x7e,
+ .cache_type = REGCACHE_RBTREE,
+
+ .reg_defaults = wm9713_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(wm9713_reg_defaults),
+ .volatile_reg = regmap_ac97_default_volatile,
+ .readable_reg = wm9713_readable_reg,
+ .writeable_reg = wm9713_writeable_reg,
+};
/* PLL divisors */
struct _pll_div {
@@ -1158,6 +1199,9 @@ static int wm9713_soc_suspend(struct snd_soc_codec *codec)
{
u16 reg;
+ snd_soc_cache_sync(codec);
+ regcache_cache_bypass(codec->component.regmap, true);
+
/* Disable everything except touchpanel - that will be handled
* by the touch driver and left disabled if touch is not in
* use. */
@@ -1173,14 +1217,14 @@ static int wm9713_soc_suspend(struct snd_soc_codec *codec)
static int wm9713_soc_resume(struct snd_soc_codec *codec)
{
struct wm9713_priv *wm9713 = snd_soc_codec_get_drvdata(codec);
- int i, ret;
- u16 *cache = codec->reg_cache;
+ int ret;
ret = snd_ac97_reset(wm9713->ac97, true, WM9713_VENDOR_ID,
WM9713_VENDOR_ID_MASK);
if (ret < 0)
return ret;
+ regcache_cache_bypass(codec->component.regmap, false);
snd_soc_codec_force_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* do we need to re-start the PLL ? */
@@ -1188,14 +1232,10 @@ static int wm9713_soc_resume(struct snd_soc_codec *codec)
wm9713_set_pll(codec, 0, wm9713->pll_in, 0);
/* only synchronise the codec if warm reset failed */
- if (ret == 0) {
- for (i = 2; i < ARRAY_SIZE(wm9713_reg) << 1; i += 2) {
- if (i == AC97_POWERDOWN || i == AC97_EXTENDED_MID ||
- i == AC97_EXTENDED_MSTATUS || i > 0x66)
- continue;
- soc_ac97_ops->write(wm9713->ac97, i, cache[i>>1]);
- }
- }
+ if (ret == 0)
+ regcache_mark_dirty(codec->component.regmap);
+
+ snd_soc_cache_sync(codec);
return ret;
}
@@ -1203,6 +1243,7 @@ static int wm9713_soc_resume(struct snd_soc_codec *codec)
static int wm9713_soc_probe(struct snd_soc_codec *codec)
{
struct wm9713_priv *wm9713 = snd_soc_codec_get_drvdata(codec);
+ struct regmap *regmap;
int reg;
wm9713->ac97 = snd_soc_new_ac97_codec(codec, WM9713_VENDOR_ID,
@@ -1210,6 +1251,14 @@ static int wm9713_soc_probe(struct snd_soc_codec *codec)
if (IS_ERR(wm9713->ac97))
return PTR_ERR(wm9713->ac97);
+ regmap = devm_regmap_init_ac97(wm9713->ac97, &wm9713_regmap_config);
+ if (IS_ERR(regmap)) {
+ snd_soc_free_ac97_codec(wm9713->ac97);
+ return PTR_ERR(regmap);
+ }
+
+ snd_soc_codec_init_regmap(codec, regmap);
+
/* unmute the adc - move to kcontrol */
reg = ac97_read(codec, AC97_CD) & 0x7fff;
ac97_write(codec, AC97_CD, reg);
@@ -1221,6 +1270,7 @@ static int wm9713_soc_remove(struct snd_soc_codec *codec)
{
struct wm9713_priv *wm9713 = snd_soc_codec_get_drvdata(codec);
+ snd_soc_codec_exit_regmap(codec);
snd_soc_free_ac97_codec(wm9713->ac97);
return 0;
}
@@ -1230,13 +1280,7 @@ static struct snd_soc_codec_driver soc_codec_dev_wm9713 = {
.remove = wm9713_soc_remove,
.suspend = wm9713_soc_suspend,
.resume = wm9713_soc_resume,
- .read = ac97_read,
- .write = ac97_write,
.set_bias_level = wm9713_set_bias_level,
- .reg_cache_size = ARRAY_SIZE(wm9713_reg),
- .reg_word_size = sizeof(u16),
- .reg_cache_step = 2,
- .reg_cache_default = wm9713_reg,
.controls = wm9713_snd_ac97_controls,
.num_controls = ARRAY_SIZE(wm9713_snd_ac97_controls),
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists