| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1445927070-5102-10-git-send-email-chaotian.jing@mediatek.com>
Date: Tue, 27 Oct 2015 14:24:29 +0800
From: Chaotian Jing <chaotian.jing@...iatek.com>
To: Ulf Hansson <ulf.hansson@...aro.org>
CC: <linux-mediatek@...ts.infradead.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Seungwon Jeon <tgih.jun@...sung.com>,
Jaehoon Chung <jh80.chung@...sung.com>,
Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
Barry Song <baohua@...nel.org>,
Hans de Goede <hdegoede@...hat.com>,
Chaotian Jing <chaotian.jing@...iatek.com>,
Lars-Peter Clausen <lars@...afoo.de>,
Javier Martinez Canillas <javier.martinez@...labora.co.uk>,
Sascha Hauer <s.hauer@...gutronix.de>,
Howard Chen <ibanezchen@...il.com>,
Adrian Hunter <adrian.hunter@...el.com>,
Kristina Martsenko <kristina.martsenko@...il.com>,
Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Minda Chen <Minda.Chen@....com>,
Dong Aisheng <b29396@...escale.com>,
Johan Derycke <johan.derycke@...co.com>,
Haibo Chen <haibo.chen@...escale.com>,
Fabio Estevam <fabio.estevam@...escale.com>,
Georgi Djakov <georgi.djakov@...aro.org>,
<ivan.ivanov@...aro.org>, Weijun Yang <Weijun.Yang@....com>,
Kevin Hao <haokexin@...il.com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mmc@...r.kernel.org>, <linux-samsung-soc@...r.kernel.org>,
<srv_heupstream@...iatek.com>
Subject: [PATCH v3 09/10] mmc: mediatek: add HS400 support
add HS400 mode and tune support
Signed-off-by: Chaotian Jing <chaotian.jing@...iatek.com>
---
drivers/mmc/host/mtk-sd.c | 249 +++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 244 insertions(+), 5 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 5627644..39568cc 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -26,6 +26,7 @@
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/mmc/card.h>
@@ -72,6 +73,8 @@
#define MSDC_PATCH_BIT 0xb0
#define MSDC_PATCH_BIT1 0xb4
#define MSDC_PAD_TUNE 0xec
+#define PAD_DS_TUNE 0x188
+#define EMMC50_CFG0 0x208
/*--------------------------------------------------------------------------*/
/* Register Mask */
@@ -88,6 +91,7 @@
#define MSDC_CFG_CKSTB (0x1 << 7) /* R */
#define MSDC_CFG_CKDIV (0xff << 8) /* RW */
#define MSDC_CFG_CKMOD (0x3 << 16) /* RW */
+#define MSDC_CFG_HS400_CK_MODE (0x1 << 18) /* RW */
/* MSDC_IOCON mask */
#define MSDC_IOCON_SDR104CKS (0x1 << 0) /* RW */
@@ -205,6 +209,17 @@
#define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */
#define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
+#define MSDC_PAD_TUNE_DATRRDLY (0x1f << 8) /* RW */
+#define MSDC_PAD_TUNE_CMDRDLY (0x1f << 16) /* RW */
+
+#define PAD_DS_TUNE_DLY1 (0x1f << 2) /* RW */
+#define PAD_DS_TUNE_DLY2 (0x1f << 7) /* RW */
+#define PAD_DS_TUNE_DLY3 (0x1f << 12) /* RW */
+
+#define EMMC50_CFG_PADCMD_LATCHCK (0x1 << 0) /* RW */
+#define EMMC50_CFG_CRCSTS_EDGE (0x1 << 3) /* RW */
+#define EMMC50_CFG_CFCSTS_SEL (0x1 << 4) /* RW */
+
#define REQ_CMD_EIO (0x1 << 0)
#define REQ_CMD_TMO (0x1 << 1)
#define REQ_DAT_ERR (0x1 << 2)
@@ -220,6 +235,7 @@
#define CMD_TIMEOUT (HZ/10 * 5) /* 100ms x5 */
#define DAT_TIMEOUT (HZ * 5) /* 1000ms x5 */
+#define PAD_DELAY_MAX 32 /* PAD delay cells */
/*--------------------------------------------------------------------------*/
/* Descriptor Structure */
/*--------------------------------------------------------------------------*/
@@ -266,6 +282,14 @@ struct msdc_save_para {
u32 pad_tune;
u32 patch_bit0;
u32 patch_bit1;
+ u32 pad_ds_tune;
+ u32 emmc50_cfg0;
+};
+
+struct msdc_delay_phase {
+ u8 maxlen;
+ u8 start;
+ u8 final_phase;
};
struct msdc_host {
@@ -300,6 +324,7 @@ struct msdc_host {
u32 sclk; /* SD/MS bus clock frequency */
unsigned char timing;
bool vqmmc_enabled;
+ u32 hs400_ds_delay;
struct msdc_save_para save_para; /* used when gate HCLK */
};
@@ -505,9 +530,15 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
flags = readl(host->base + MSDC_INTEN);
sdr_clr_bits(host->base + MSDC_INTEN, flags);
+ sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE);
if (timing == MMC_TIMING_UHS_DDR50 ||
- timing == MMC_TIMING_MMC_DDR52) {
- mode = 0x2; /* ddr mode and use divisor */
+ timing == MMC_TIMING_MMC_DDR52 ||
+ timing == MMC_TIMING_MMC_HS400) {
+ if (timing == MMC_TIMING_MMC_HS400)
+ mode = 0x3;
+ else
+ mode = 0x2; /* ddr mode and use divisor */
+
if (hz >= (host->src_clk_freq >> 2)) {
div = 0; /* mean div = 1/4 */
sclk = host->src_clk_freq >> 2; /* sclk = clk / 4 */
@@ -516,6 +547,14 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
sclk = (host->src_clk_freq >> 2) / div;
div = (div >> 1);
}
+
+ if (timing == MMC_TIMING_MMC_HS400 &&
+ hz >= (host->src_clk_freq >> 1)) {
+ sdr_set_bits(host->base + MSDC_CFG,
+ MSDC_CFG_HS400_CK_MODE);
+ sclk = host->src_clk_freq >> 1;
+ div = 0; /* div is ignore when bit18 is set */
+ }
} else if (hz >= host->src_clk_freq) {
mode = 0x1; /* no divisor */
div = 0;
@@ -894,7 +933,7 @@ static void msdc_data_xfer_next(struct msdc_host *host,
struct mmc_request *mrq, struct mmc_data *data)
{
if (mmc_op_multi(mrq->cmd->opcode) && mrq->stop && !mrq->stop->error &&
- (!data->bytes_xfered || !mrq->sbc))
+ !mrq->sbc)
msdc_start_command(host, mrq, mrq->stop);
else
msdc_request_done(host, mrq);
@@ -940,6 +979,8 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
if (events & MSDC_INT_DATTMO)
data->error = -ETIMEDOUT;
+ else if (events & MSDC_INT_DATCRCERR)
+ data->error = -EILSEQ;
dev_err(host->dev, "%s: cmd=%d; blocks=%d",
__func__, mrq->cmd->opcode, data->blocks);
@@ -1111,10 +1152,12 @@ static void msdc_init_hw(struct msdc_host *host)
writel(0, host->base + MSDC_PAD_TUNE);
writel(0, host->base + MSDC_IOCON);
- sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 1);
- writel(0x403c004f, host->base + MSDC_PATCH_BIT);
+ sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 0);
+ writel(0x403c0046, host->base + MSDC_PATCH_BIT);
sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1);
writel(0xffff0089, host->base + MSDC_PATCH_BIT1);
+ sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL);
+
/* Configure to enable SDIO mode.
* it's must otherwise sdio cmd5 failed
*/
@@ -1172,6 +1215,7 @@ static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
switch (ios->power_mode) {
case MMC_POWER_UP:
if (!IS_ERR(mmc->supply.vmmc)) {
+ msdc_init_hw(host);
ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
ios->vdd);
if (ret) {
@@ -1210,6 +1254,190 @@ end:
pm_runtime_put_autosuspend(host->dev);
}
+static u32 test_delay_bit(u32 delay, u32 bit)
+{
+ bit %= PAD_DELAY_MAX;
+ return delay & (1 << bit);
+}
+
+static int get_delay_len(u32 delay, u32 start_bit)
+{
+ int i;
+
+ for (i = 0; i < (PAD_DELAY_MAX - start_bit); i++) {
+ if (test_delay_bit(delay, start_bit + i) == 0)
+ return i;
+ }
+ return PAD_DELAY_MAX - start_bit;
+}
+
+static struct msdc_delay_phase get_best_delay(struct msdc_host *host, u32 delay)
+{
+ int start = 0, len = 0;
+ int start_final = 0, len_final = 0;
+ u8 final_phase = 0xff;
+ struct msdc_delay_phase delay_phase;
+
+ if (delay == 0) {
+ dev_err(host->dev, "phase error: [map:%x]\n", delay);
+ delay_phase.final_phase = final_phase;
+ return delay_phase;
+ }
+
+ while (start < PAD_DELAY_MAX) {
+ len = get_delay_len(delay, start);
+ if (len_final < len) {
+ start_final = start;
+ len_final = len;
+ }
+ start += len ? len : 1;
+ if (len >= 8 && start_final < 4)
+ break;
+ }
+
+ /* The rule is that to find the smallest delay cell */
+ if (start_final == 0)
+ final_phase = (start_final + len_final / 3) % PAD_DELAY_MAX;
+ else
+ final_phase = (start_final + len_final / 2) % PAD_DELAY_MAX;
+ dev_info(host->dev, "phase: [map:%x] [maxlen:%d] [final:%d]\n",
+ delay, len_final, final_phase);
+
+ delay_phase.maxlen = len_final;
+ delay_phase.start = start_final;
+ delay_phase.final_phase = final_phase;
+ return delay_phase;
+}
+
+static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
+{
+ struct msdc_host *host = mmc_priv(mmc);
+ u32 rise_delay = 0, fall_delay = 0;
+ struct msdc_delay_phase final_rise_delay, final_fall_delay;
+ u8 final_delay, final_maxlen;
+ int cmd_err;
+ int i;
+
+ sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
+ for (i = 0 ; i < PAD_DELAY_MAX; i++) {
+ sdr_set_field(host->base + MSDC_PAD_TUNE,
+ MSDC_PAD_TUNE_CMDRDLY, i);
+ mmc_send_tuning(mmc, opcode, &cmd_err);
+ if (!cmd_err)
+ rise_delay |= (1 << i);
+ }
+
+ sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
+ for (i = 0; i < PAD_DELAY_MAX; i++) {
+ sdr_set_field(host->base + MSDC_PAD_TUNE,
+ MSDC_PAD_TUNE_CMDRDLY, i);
+ mmc_send_tuning(mmc, opcode, &cmd_err);
+ if (!cmd_err)
+ fall_delay |= (1 << i);
+ }
+
+ final_rise_delay = get_best_delay(host, rise_delay);
+ final_fall_delay = get_best_delay(host, fall_delay);
+
+ final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen);
+ if (final_maxlen == final_rise_delay.maxlen) {
+ sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
+ sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY,
+ final_rise_delay.final_phase);
+ final_delay = final_rise_delay.final_phase;
+ } else {
+ sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
+ sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY,
+ final_fall_delay.final_phase);
+ final_delay = final_fall_delay.final_phase;
+ }
+
+ return final_delay == 0xff ? -EIO : 0;
+}
+
+static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
+{
+ struct msdc_host *host = mmc_priv(mmc);
+ u32 rise_delay = 0, fall_delay = 0;
+ struct msdc_delay_phase final_rise_delay, final_fall_delay;
+ u8 final_delay, final_maxlen;
+ int i, ret;
+
+ sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
+ sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
+ for (i = 0 ; i < PAD_DELAY_MAX; i++) {
+ sdr_set_field(host->base + MSDC_PAD_TUNE,
+ MSDC_PAD_TUNE_DATRRDLY, i);
+ ret = mmc_send_tuning(mmc, opcode, NULL);
+ if (!ret)
+ rise_delay |= (1 << i);
+ }
+
+ sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
+ sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
+ for (i = 0; i < PAD_DELAY_MAX; i++) {
+ sdr_set_field(host->base + MSDC_PAD_TUNE,
+ MSDC_PAD_TUNE_DATRRDLY, i);
+ ret = mmc_send_tuning(mmc, opcode, NULL);
+ if (!ret)
+ fall_delay |= (1 << i);
+ }
+
+ final_rise_delay = get_best_delay(host, rise_delay);
+ final_fall_delay = get_best_delay(host, fall_delay);
+
+ final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen);
+ /* Rising edge is more stable, prefer to use it */
+ if (final_rise_delay.maxlen >= 10)
+ final_maxlen = final_rise_delay.maxlen;
+ if (final_maxlen == final_rise_delay.maxlen) {
+ sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
+ sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
+ sdr_set_field(host->base + MSDC_PAD_TUNE,
+ MSDC_PAD_TUNE_DATRRDLY,
+ final_rise_delay.final_phase);
+ final_delay = final_rise_delay.final_phase;
+ } else {
+ sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
+ sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
+ sdr_set_field(host->base + MSDC_PAD_TUNE,
+ MSDC_PAD_TUNE_DATRRDLY,
+ final_fall_delay.final_phase);
+ final_delay = final_fall_delay.final_phase;
+ }
+
+ return final_delay == 0xff ? -EIO : 0;
+}
+
+static int msdc_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+ struct msdc_host *host = mmc_priv(mmc);
+ int ret;
+
+ pm_runtime_get_sync(host->dev);
+ ret = msdc_tune_response(mmc, opcode);
+ if (ret == -EIO) {
+ dev_err(host->dev, "Tune response fail!\n");
+ goto out;
+ }
+ ret = msdc_tune_data(mmc, opcode);
+ if (ret == -EIO)
+ dev_err(host->dev, "Tune data fail!\n");
+
+out:
+ pm_runtime_mark_last_busy(host->dev);
+ pm_runtime_put_autosuspend(host->dev);
+ return ret;
+}
+
+static int msdc_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct msdc_host *host = mmc_priv(mmc);
+
+ writel(host->hs400_ds_delay, host->base + PAD_DS_TUNE);
+ return 0;
+}
+
static void msdc_hw_reset(struct mmc_host *mmc)
{
struct msdc_host *host = mmc_priv(mmc);
@@ -1226,6 +1454,8 @@ static struct mmc_host_ops mt_msdc_ops = {
.set_ios = msdc_ops_set_ios,
.start_signal_voltage_switch = msdc_ops_switch_volt,
.card_busy = msdc_card_busy,
+ .execute_tuning = msdc_execute_tuning,
+ .prepare_hs400_tuning = msdc_prepare_hs400_tuning,
.hw_reset = msdc_hw_reset,
};
@@ -1300,6 +1530,11 @@ static int msdc_drv_probe(struct platform_device *pdev)
goto host_free;
}
+ if (!of_property_read_u32(pdev->dev.of_node, "hs400-ds-delay",
+ &host->hs400_ds_delay))
+ dev_dbg(&pdev->dev, "hs400-ds-delay: %x\n",
+ host->hs400_ds_delay);
+
host->dev = &pdev->dev;
host->mmc = mmc;
host->src_clk_freq = clk_get_rate(host->src_clk);
@@ -1410,6 +1645,8 @@ static void msdc_save_reg(struct msdc_host *host)
host->save_para.pad_tune = readl(host->base + MSDC_PAD_TUNE);
host->save_para.patch_bit0 = readl(host->base + MSDC_PATCH_BIT);
host->save_para.patch_bit1 = readl(host->base + MSDC_PATCH_BIT1);
+ host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
+ host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0);
}
static void msdc_restore_reg(struct msdc_host *host)
@@ -1420,6 +1657,8 @@ static void msdc_restore_reg(struct msdc_host *host)
writel(host->save_para.pad_tune, host->base + MSDC_PAD_TUNE);
writel(host->save_para.patch_bit0, host->base + MSDC_PATCH_BIT);
writel(host->save_para.patch_bit1, host->base + MSDC_PATCH_BIT1);
+ writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
+ writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0);
}
static int msdc_runtime_suspend(struct device *dev)
--
1.8.1.1.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists