lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1445908827-31015-2-git-send-email-sboyd@codeaurora.org>
Date:	Mon, 26 Oct 2015 18:20:27 -0700
From:	Stephen Boyd <sboyd@...eaurora.org>
To:	Mike Turquette <mturquette@...libre.com>,
	Stephen Boyd <sboyd@...eaurora.org>
Cc:	linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
	linux-arm-msm@...r.kernel.org,
	Georgi Djakov <georgi.djakov@...aro.org>
Subject: [PATCH 2/2] clk: qcom: msm8960: Move cxo/pxo into dt files

Put the cxo and pxo clocks into the dt files as 'cxo_board' and
'pxo_board'. This provides a few benefits. It allows us to
specify the frequency of these clocks at the board level instead
of hard-coding them in the driver. It allows us to insert an RPM
clock in between the consumers of the crystals and the actual
clock if desired. And finally, it helps us transition the GCC
driver to use RPM clocks when the configuration is enabled.

Cc: Georgi Djakov <georgi.djakov@...aro.org>
Signed-off-by: Stephen Boyd <sboyd@...eaurora.org>
---
 drivers/clk/qcom/gcc-msm8960.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
index 66c18bc97857..6f11035bca93 100644
--- a/drivers/clk/qcom/gcc-msm8960.c
+++ b/drivers/clk/qcom/gcc-msm8960.c
@@ -3503,7 +3503,6 @@ MODULE_DEVICE_TABLE(of, gcc_msm8960_match_table);
 
 static int gcc_msm8960_probe(struct platform_device *pdev)
 {
-	struct clk *clk;
 	struct device *dev = &pdev->dev;
 	const struct of_device_id *match;
 	struct platform_device *tsens;
@@ -3513,14 +3512,18 @@ static int gcc_msm8960_probe(struct platform_device *pdev)
 	if (!match)
 		return -EINVAL;
 
-	/* Temporary until RPM clocks supported */
-	clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	/*
+	 * Backwards compatibility with old DTs. Register a pass-through
+	 * factor 1/1 clock to translate cxo_board into cxo and pxo_board
+	 * into pxo.
+	 */
+	ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 19200000);
+	if (ret)
+		return ret;
 
-	clk = clk_register_fixed_rate(dev, "pxo", NULL, CLK_IS_ROOT, 27000000);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 27000000);
+	if (ret)
+		return ret;
 
 	ret = qcom_cc_probe(pdev, match->data);
 	if (ret)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists