linux-kernel - [PATCH 27/70] cpufreq: interactive: change speed according to current speed and target load

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Tue, 27 Oct 2015 18:30:15 +0100
From:	Bálint Czobor <czoborbalint@...il.com>
To:	"Rafael J. Wysocki" <rjw@...ysocki.net>,
	Viresh Kumar <viresh.kumar@...aro.org>
Cc:	linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
	Todd Poynor <toddpoynor@...gle.com>,
	Bálint Czobor <czoborbalint@...il.com>
Subject: [PATCH 27/70] cpufreq: interactive: change speed according to current speed and target load

From: Todd Poynor <toddpoynor@...gle.com>

Add a target_load attribute that specifies how aggressively the governor is
to adjust speed to meet the observed load.  New target speed is calculated
as the current actual speed (may be higher than target speed on SMP) times
the CPU load (as a fraction) divided by target load (fraction).

cpufreq_frequency_table_target() call use CPUFREQ_RELATION_L to set
the next higher speed rather than next lower speed.

Change-Id: If432451da82f5fed12e15c9421d7d27792376150
Signed-off-by: Todd Poynor <toddpoynor@...gle.com>
Signed-off-by: Bálint Czobor <czoborbalint@...il.com>
---
 drivers/cpufreq/cpufreq_interactive.c |   35 ++++++++++++++++++++++++++++++---
 1 file changed, 32 insertions(+), 3 deletions(-)

diff --git a/drivers/cpufreq/cpufreq_interactive.c b/drivers/cpufreq/cpufreq_interactive.c
index 2b4aad9..c4293c5 100644
--- a/drivers/cpufreq/cpufreq_interactive.c
+++ b/drivers/cpufreq/cpufreq_interactive.c
@@ -68,6 +68,10 @@ static unsigned int hispeed_freq;
 #define DEFAULT_GO_HISPEED_LOAD 85
 static unsigned long go_hispeed_load;
 
+/* Target load.  Lower values result in higher CPU speeds. */
+#define DEFAULT_TARGET_LOAD 90
+static unsigned long target_load = DEFAULT_TARGET_LOAD;
+
 /*
  * The minimum amount of time to spend at a frequency before we can ramp down.
  */
@@ -177,7 +181,7 @@ static void cpufreq_interactive_timer(unsigned long data)
 		    hispeed_freq < pcpu->policy->max) {
 			new_freq = hispeed_freq;
 		} else {
-			new_freq = pcpu->policy->max * cpu_load / 100;
+			new_freq = pcpu->policy->cur * cpu_load / target_load;
 
 			if (new_freq < hispeed_freq)
 				new_freq = hispeed_freq;
@@ -193,14 +197,14 @@ static void cpufreq_interactive_timer(unsigned long data)
 			}
 		}
 	} else {
-		new_freq = hispeed_freq * cpu_load / 100;
+		new_freq = pcpu->policy->cur * cpu_load / target_load;
 	}
 
 	if (new_freq <= hispeed_freq)
 		pcpu->hispeed_validate_time = now;
 
 	if (cpufreq_frequency_table_target(pcpu->policy, pcpu->freq_table,
-					   new_freq, CPUFREQ_RELATION_H,
+					   new_freq, CPUFREQ_RELATION_L,
 					   &index)) {
 		pr_warn_once("timer %d: cpufreq_frequency_table_target error\n",
 			     (int) data);
@@ -420,6 +424,30 @@ static void cpufreq_interactive_boost(void)
 		wake_up_process(speedchange_task);
 }
 
+static ssize_t show_target_load(
+	struct kobject *kobj, struct attribute *attr, char *buf)
+{
+	return sprintf(buf, "%lu\n", target_load);
+}
+
+static ssize_t store_target_load(
+	struct kobject *kobj, struct attribute *attr, const char *buf,
+	size_t count)
+{
+	int ret;
+	unsigned long val;
+
+	ret = strict_strtoul(buf, 0, &val);
+	if (ret < 0)
+		return ret;
+	target_load = val;
+	return count;
+}
+
+static struct global_attr target_load_attr =
+	__ATTR(target_load, S_IRUGO | S_IWUSR,
+		show_target_load, store_target_load);
+
 static ssize_t show_hispeed_freq(struct kobject *kobj,
 				 struct attribute *attr, char *buf)
 {
@@ -581,6 +609,7 @@ static struct global_attr boostpulse =
 	__ATTR(boostpulse, 0200, NULL, store_boostpulse);
 
 static struct attribute *interactive_attributes[] = {
+	&target_load_attr.attr,
 	&hispeed_freq_attr.attr,
 	&go_hispeed_load_attr.attr,
 	&above_hispeed_delay.attr,
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/