| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <BL2PR03MB5006080090B6783629A33A5E6220@BL2PR03MB500.namprd03.prod.outlook.com>
Date: Tue, 27 Oct 2015 16:32:47 +0000
From: Liberman Igal <Igal.Liberman@...escale.com>
To: Scott Wood <scottwood@...escale.com>
CC: "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linuxppc-dev@...ts.ozlabs.org" <linuxppc-dev@...ts.ozlabs.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Madalin-Cristian Bucur <madalin.bucur@...escale.com>
Subject: RE: [V5, 2/6] fsl/fman: Add FMan support
Regards,
Igal Liberman
> -----Original Message-----
> From: Wood Scott-B07421
> Sent: Saturday, September 26, 2015 2:02 AM
> To: Liberman Igal-B31950 <Igal.Liberman@...escale.com>
> Cc: netdev@...r.kernel.org; linuxppc-dev@...ts.ozlabs.org; linux-
> kernel@...r.kernel.org; Bucur Madalin-Cristian-B32716
> <madalin.bucur@...escale.com>
> Subject: Re: [V5, 2/6] fsl/fman: Add FMan support
>
> On Mon, Sep 21, 2015 at 02:52:34PM +0300, Igal.Liberman wrote:
> > diff --git a/drivers/net/ethernet/freescale/fman/fman.c
> > b/drivers/net/ethernet/freescale/fman/fman.c
> > new file mode 100644
> > index 0000000..924685f
> > --- /dev/null
> > +++ b/drivers/net/ethernet/freescale/fman/fman.c
> > @@ -0,0 +1,2738 @@
> > +/*
> > + * Copyright 2008-2015 Freescale Semiconductor Inc.
> > + *
> > + * Redistribution and use in source and binary forms, with or without
> > + * modification, are permitted provided that the following conditions are
> met:
> > + * * Redistributions of source code must retain the above copyright
> > + * notice, this list of conditions and the following disclaimer.
> > + * * Redistributions in binary form must reproduce the above copyright
> > + * notice, this list of conditions and the following disclaimer in the
> > + * documentation and/or other materials provided with the
> distribution.
> > + * * Neither the name of Freescale Semiconductor nor the
> > + * names of its contributors may be used to endorse or promote
> products
> > + * derived from this software without specific prior written permission.
> > + *
> > +// *
> > + * ALTERNATIVELY, this software may be distributed under the terms of
> > +the
> > + * GNU General Public License ("GPL") as published by the Free
> > +Software
> > + * Foundation, either version 2 of that License or (at your option)
> > +any
> > + * later version.
>
> What is that // doing there?
Removed.
>
> > +/* Exceptions bit map */
> > +#define EX_DMA_BUS_ERROR 0x80000000
> > +#define EX_DMA_READ_ECC 0x40000000
> > +#define EX_DMA_SYSTEM_WRITE_ECC 0x20000000
> > +#define EX_DMA_FM_WRITE_ECC 0x10000000
> > +#define EX_FPM_STALL_ON_TASKS 0x08000000
> > +#define EX_FPM_SINGLE_ECC 0x04000000
> > +#define EX_FPM_DOUBLE_ECC 0x02000000
> > +#define EX_QMI_SINGLE_ECC 0x01000000
> > +#define EX_QMI_DEQ_FROM_UNKNOWN_PORTID 0x00800000
> > +#define EX_QMI_DOUBLE_ECC 0x00400000
> > +#define EX_BMI_LIST_RAM_ECC 0x00200000
> > +#define EX_BMI_STORAGE_PROFILE_ECC 0x00100000
> > +#define EX_BMI_STATISTICS_RAM_ECC 0x00080000
> > +#define EX_IRAM_ECC 0x00040000
> > +#define EX_MURAM_ECC 0x00020000
> > +#define EX_BMI_DISPATCH_RAM_ECC 0x00010000
> > +#define EX_DMA_SINGLE_PORT_ECC 0x00008000
> > +
> > +#define DFLT_EXCEPTIONS \
> > + ((EX_DMA_BUS_ERROR) | \
> > + (EX_DMA_READ_ECC) | \
> > + (EX_DMA_SYSTEM_WRITE_ECC) | \
> > + (EX_DMA_FM_WRITE_ECC) | \
> > + (EX_FPM_STALL_ON_TASKS) | \
> > + (EX_FPM_SINGLE_ECC) | \
> > + (EX_FPM_DOUBLE_ECC) | \
> > + (EX_QMI_DEQ_FROM_UNKNOWN_PORTID) | \
> > + (EX_BMI_LIST_RAM_ECC) | \
> > + (EX_BMI_STORAGE_PROFILE_ECC) | \
> > + (EX_BMI_STATISTICS_RAM_ECC) | \
> > + (EX_MURAM_ECC) | \
> > + (EX_BMI_DISPATCH_RAM_ECC) | \
> > + (EX_QMI_DOUBLE_ECC) | \
> > + (EX_QMI_SINGLE_ECC))
>
> You don't need parentheses around each symbol.
>
Removed the parentheses (here and in other places)
> This is only used in one place -- why put the list here rather than in the place
> where it's used?
>
Moved this define.
> > +struct fman_state_struct {
> > + u8 fm_id;
> > + u16 fm_clk_freq;
> > + struct fman_rev_info rev_info;
> > + bool enabled_time_stamp;
> > + u8 count1_micro_bit;
> > + u8 total_num_of_tasks;
> > + u8 accumulated_num_of_tasks;
> > + u32 accumulated_fifo_size;
> > + u8 accumulated_num_of_open_dmas;
> > + u8 accumulated_num_of_deq_tnums;
> > + bool low_end_restriction;
> > + u32 exceptions;
> > + u32 extra_fifo_pool_size;
> > + u8 extra_tasks_pool_size;
> > + u8 extra_open_dmas_pool_size;
> > + u16 port_mfl[MAX_NUM_OF_MACS];
> > + u16 mac_mfl[MAX_NUM_OF_MACS];
> > +
> > + /* SOC specific */
> > + u32 fm_iram_size;
> > + /* DMA */
> > + u32 dma_thresh_max_commq;
> > + u32 dma_thresh_max_buf;
> > + u32 max_num_of_open_dmas;
> > + /* QMI */
> > + u32 qmi_max_num_of_tnums;
> > + u32 qmi_def_tnums_thresh;
> > + /* BMI */
> > + u32 bmi_max_num_of_tasks;
> > + u32 bmi_max_fifo_size;
> > + /* General */
> > + u32 fm_port_num_of_cg;
> > + u32 num_of_rx_ports;
> > + u32 total_fifo_size;
> > +
> > + u32 qman_channel_base;
> > + u32 num_of_qman_channels;
> > +
> > + struct resource *res;
> > +};
> > +
> > +struct fman_cfg {
> > + u8 disp_limit_tsh;
> > + u8 prs_disp_tsh;
> > + u8 plcr_disp_tsh;
> > + u8 kg_disp_tsh;
> > + u8 bmi_disp_tsh;
> > + u8 qmi_enq_disp_tsh;
> > + u8 qmi_deq_disp_tsh;
> > + u8 fm_ctl1_disp_tsh;
> > + u8 fm_ctl2_disp_tsh;
> > + int dma_cache_override;
> > + enum fman_dma_aid_mode dma_aid_mode;
> > + bool dma_aid_override;
> > + u32 dma_axi_dbg_num_of_beats;
> > + u32 dma_cam_num_of_entries;
> > + u32 dma_watchdog;
> > + u8 dma_comm_qtsh_asrt_emer;
> > + u32 dma_write_buf_tsh_asrt_emer;
> > + u32 dma_read_buf_tsh_asrt_emer;
> > + u8 dma_comm_qtsh_clr_emer;
> > + u32 dma_write_buf_tsh_clr_emer;
> > + u32 dma_read_buf_tsh_clr_emer;
> > + u32 dma_sos_emergency;
> > + int dma_dbg_cnt_mode;
> > + bool dma_stop_on_bus_error;
> > + bool dma_en_emergency;
> > + u32 dma_emergency_bus_select;
> > + int dma_emergency_level;
> > + bool dma_en_emergency_smoother;
> > + u32 dma_emergency_switch_counter;
> > + bool halt_on_external_activ;
> > + bool halt_on_unrecov_ecc_err;
> > + int catastrophic_err;
> > + int dma_err;
> > + bool en_muram_test_mode;
> > + bool en_iram_test_mode;
> > + bool external_ecc_rams_enable;
> > + u16 tnum_aging_period;
> > + u32 exceptions;
> > + u16 clk_freq;
> > + bool pedantic_dma;
> > + u32 cam_base_addr;
> > + u32 fifo_base_addr;
> > + u32 total_fifo_size;
> > + u32 total_num_of_tasks;
> > + bool qmi_deq_option_support;
> > + u32 qmi_def_tnums_thresh;
> > +};
>
> Some documentation on this stuff would be nice.
>
> > +static inline u8 hw_port_id_to_sw_port_id(u8 major, u8 hw_port_id) {
> > + u8 sw_port_id = 0;
> > +
> > + if (hw_port_id >= BASE_TX_PORTID) {
> > + sw_port_id = hw_port_id - BASE_TX_PORTID;
> > + } else if (hw_port_id >= BASE_RX_PORTID) {
> > + sw_port_id = hw_port_id - BASE_RX_PORTID;
> > + } else {
> > + sw_port_id = 0;
> > + WARN_ON(false);
>
> WARN_ON(false) is a no-op.
>
Removed.
> > + }
> > +
> > + return sw_port_id;
> > +}
> > +
> > +static void set_port_order_restoration(struct fman_fpm_regs __iomem
> *fpm_rg,
> > + u8 port_id)
> > +{
> > + u32 tmp = 0;
> > +
> > + tmp = (u32)(port_id << FPM_PORT_FM_CTL_PORTID_SHIFT);
>
> Unnecessary cast. Likewise elsewhere.
>
Removed.
> > +
> > + tmp |= (FPM_PRT_FM_CTL2 | FPM_PRT_FM_CTL1);
> > +
> > + /* order restoration */
> > + if (port_id % 2)
> > + tmp |= (FPM_PRT_FM_CTL1 <<
> FPM_PRC_ORA_FM_CTL_SEL_SHIFT);
> > + else
> > + tmp |= (FPM_PRT_FM_CTL2 <<
> FPM_PRC_ORA_FM_CTL_SEL_SHIFT);
>
> Unnecessary parens.
>
Removed.
> > +static int get_module_event(enum fman_event_modules module, u8
> mod_id,
> > + enum fman_intr_type intr_type) {
> > + int event;
> > +
> > + switch (module) {
> > + case FMAN_MOD_MAC:
> > + event = (intr_type == FMAN_INTR_TYPE_ERR) ?
> > + (FMAN_EV_ERR_MAC0 + mod_id) :
> > + (FMAN_EV_MAC0 + mod_id);
>
> Use if/else...
>
Done.
> > + break;
> > + case FMAN_MOD_FMAN_CTRL:
> > + if (intr_type == FMAN_INTR_TYPE_ERR)
> > + event = FMAN_EV_CNT;
> > + else
> > + event = (FMAN_EV_FMAN_CTRL_0 + mod_id);
> > + break;
>
> ...just like here.
>
> > + /* Read, modify and write to HW */
> > + tmp = (u32)((fifo / FMAN_BMI_FIFO_UNITS - 1) |
> > + ((extra_fifo / FMAN_BMI_FIFO_UNITS) <<
> > + BMI_EXTRA_FIFO_SIZE_SHIFT));
>
> Unnecessary cast.
>
Removed.
> > + if (extra_tasks)
> > + fman->state->extra_tasks_pool_size =
> > + (u8)max(fman->state->extra_tasks_pool_size, extra_tasks);
>
> Unnecessary cast.
>
Removed.
> > +static int fman_init(struct fman *fman) {
> > + struct fman_cfg *cfg = NULL;
> > + struct fman_rg fman_rg;
> > + int err = 0, i;
> > +
> > + if (is_init_done(fman->cfg))
> > + return -EINVAL;
> > +
> > + fman_rg.bmi_rg = fman->bmi_regs;
> > + fman_rg.qmi_rg = fman->qmi_regs;
> > + fman_rg.fpm_rg = fman->fpm_regs;
> > + fman_rg.dma_rg = fman->dma_regs;
>
> Why keep this information in two different places and formats?
Removed struct fman_rg.
The pointers to the memory map are saved only in struct fman now.
>
> > + /* Reset the FM if required. */
> > + if (fman->reset_on_init) {
>
> When is this ever not true?
>
Removed the check, always preform reset.
> > + if (fman->state->rev_info.major >= 6) {
> > + /* Errata A007273 */
> > + pr_debug("FManV3 reset is not supported!\n");
>
> No plan to implement the workaround involving DEVDISR2?
>
Not now. This is probably required for loadable module support.
I'll consider adding a workaround if needed.
> > + } else {
> > + out_be32(&fman->fpm_regs->fm_rstc,
> FPM_RSTC_FM_RESET);
> > + /* Memory barrier */
> > + mb();
> > + usleep_range(100, 300);
> > + }
>
> Where does 100us come from? Shouldn't you wait for the FM_RESET bit to
> be cleared?
>
Changed the way the driver waits for FMan reset completion.
> > +
> > + if (!!(ioread32be(&fman_rg.qmi_rg->fmqm_gs) &
> > + QMI_GS_HALT_NOT_BUSY)) {
> > + resume(fman->fpm_regs);
> > + usleep_range(100, 300);
> > + }
>
> There's no need for !! here.
>
Removed.
> Same question as above regarding the delay.
>
Changed the way the driver waits for resume completion.
> > +static int fman_set_exception(struct fman *fman,
> > + enum fman_exceptions exception, bool enable) {
> > + u32 bit_mask = 0;
> > + struct fman_rg fman_rg;
> > +
> > + if (!is_init_done(fman->cfg))
> > + return -EINVAL;
> > +
> > + fman_rg.bmi_rg = fman->bmi_regs;
> > + fman_rg.qmi_rg = fman->qmi_regs;
> > + fman_rg.fpm_rg = fman->fpm_regs;
> > + fman_rg.dma_rg = fman->dma_regs;
> > +
> > + bit_mask = get_exception_flag(exception);
> > + if (bit_mask) {
> > + if (enable)
> > + fman->state->exceptions |= bit_mask;
> > + else
> > + fman->state->exceptions &= ~bit_mask;
> > + } else {
> > + pr_err("Undefined exception\n");
> > + return -EINVAL;
>
> This is not a useful error message.
>
> Use dev_err, __func__, and print the unexpected value.
>
> Likewise elsewhere.
>
Changed to dev_err/warn/debug where possible.
> > + }
> > +
> > + return set_exckeption(&fman_rg, exception, enable); }
> > +
> > +void fman_register_intr(struct fman *fman, enum fman_event_modules
> module,
> > + u8 mod_id, enum fman_intr_type intr_type,
> > + void (*isr_cb)(void *src_arg), void *src_arg) {
> > + int event = 0;
> > +
> > + event = get_module_event(module, mod_id, intr_type);
> > + WARN_ON(!(event < FMAN_EV_CNT));
>
> This isn't floating point. You can safely say WARN_ON(event >=
> FMAN_EV_CNT). :-P
>
Done.
> > + spin_lock_irqsave(&fman->spinlock, int_flags);
>
> "flags", rather than "int_flags" is idiomatic.
Replaced int_flags with flags.
>
> > +
> > + err = set_num_of_tasks(fman, port_params->port_id,
> > + &port_params->num_of_tasks,
> > + &port_params->num_of_extra_tasks);
> > + if (err) {
> > + spin_unlock_irqrestore(&fman->spinlock, int_flags);
> > + return err;
> > + }
>
> Use the standard goto error handling model.
>
Done.
> > + /* if deq_th is too small, we enlarge it to the min
> > + * value that is still 0.
> > + * depTh may not be larger than 63
> > + * (fman->state->qmi_max_num_of_tnums-1).
> > + */
> > + if ((deq_th <= fman->state-
> >accumulated_num_of_deq_tnums) &&
> > + (deq_th < fman->state->qmi_max_num_of_tnums - 1)) {
> > + deq_th =
> > + fman->state-
> >accumulated_num_of_deq_tnums + 1;
> > + reg = ioread32be(&fman_rg.qmi_rg->fmqm_gc);
>
> Whitespace
>
removed.
> > +/* Max frame size, across all interfaces.
> > + * Configurable from bootargs, to avoid allocating oversized (socket)
> > + * buffers when not using jumbo frames.
> > + * Must be large enough to accommodate the network MTU, but small
> > +enough
> > + * to avoid wasting skb memory.
> > + *
> > + * Could be overridden once, at boot-time, via the
> > + * fm_set_max_frm() callback.
> > + */
> > +int fsl_fm_max_frm = FSL_FM_MAX_FRAME_SIZE;
> > +module_param(fsl_fm_max_frm, int, 0);
> > +MODULE_PARM_DESC(fsl_fm_max_frm, "Maximum frame size, across all
> > +interfaces");
> > +
> > +u16 fman_get_max_frm(void)
> > +{
> > + static bool fm_check_mfl;
> > +
> > + if (!fm_check_mfl) {
> > + if (fsl_fm_max_frm > FSL_FM_MAX_POSSIBLE_FRAME_SIZE
> ||
> > + fsl_fm_max_frm < FSL_FM_MIN_POSSIBLE_FRAME_SIZE)
> {
> > + pr_warn("Invalid fsl_fm_max_frm value (%d) in
> bootargs, valid range is %d-%d. Falling back to the default (%d)\n",
> > + fsl_fm_max_frm,
> > + FSL_FM_MIN_POSSIBLE_FRAME_SIZE,
> > + FSL_FM_MAX_POSSIBLE_FRAME_SIZE,
> > + FSL_FM_MAX_FRAME_SIZE);
> > + fsl_fm_max_frm = FSL_FM_MAX_FRAME_SIZE;
> > + }
> > + fm_check_mfl = true;
> > + }
> > +
> > + return fsl_fm_max_frm;
> > +}
> > +EXPORT_SYMBOL(fman_get_max_frm);
> > +
> > +int fman_get_rx_extra_headroom(void)
> > +{
> > + static bool fm_check_rx_extra_headroom;
> > +
> > + if (!fm_check_rx_extra_headroom) {
> > + if (fsl_fm_rx_extra_headroom >
> FSL_FM_RX_EXTRA_HEADROOM_MAX ||
> > + fsl_fm_rx_extra_headroom <
> FSL_FM_RX_EXTRA_HEADROOM_MIN) {
> > + pr_warn("Invalid fsl_fm_rx_extra_headroom value
> (%d) in bootargs, valid range is %d-%d. Falling back to the default (%d)\n",
> > + fsl_fm_rx_extra_headroom,
> > + FSL_FM_RX_EXTRA_HEADROOM_MIN,
> > + FSL_FM_RX_EXTRA_HEADROOM_MAX,
> > + FSL_FM_RX_EXTRA_HEADROOM);
> > + fsl_fm_rx_extra_headroom =
> FSL_FM_RX_EXTRA_HEADROOM;
> > + }
> > +
> > + fsl_fm_rx_extra_headroom = true;
> > + fsl_fm_rx_extra_headroom =
> ALIGN(fsl_fm_rx_extra_headroom, 16);
> > + }
> > +
> > + return fsl_fm_rx_extra_headroom;
> > +}
> > +EXPORT_SYMBOL(fman_get_rx_extra_headroom);
> > +
>
> What calls these functions?
>
DPAA Ethernet driver.
> > +struct fman *fman_bind(struct device *fm_dev) {
> > + return (struct fman *)(dev_get_drvdata(get_device(fm_dev)));
> > +}
> > +
> > +void fman_unbind(struct fman *fman)
> > +{
> > + put_device(fman->dev);
> > +}
>
> Why?
>
It's was used by the MAC, but it's not mandatory for now, removed.
> > +
> > +struct device *fman_get_device(struct fman *fman) {
> > + return fman->dev;
> > +}
>
> Is this really necessary?
>
Fman port needs fman->dev, fman structure is opaque, so yes, it's needed.
> > +static irqreturn_t fman_irq(int irq, void *fman) {
> > + fman_event_isr(fman);
> > +
> > + return IRQ_HANDLED;
> > +}
>
> Only return IRQ_HANDLED if something was actually handled.
>
Done.
> > +static const struct of_device_id fman_muram_match[] = {
> > + {
> > + .compatible = "fsl,fman-muram"},
> > + {}
> k> +};
>
> Whitespace
>
Removed.
> > + clk = of_clk_get_by_name(fm_node, NULL);
> > + if (IS_ERR(clk)) {
> > + pr_err("Failed to get FM%d clock structure\n",
> > + fman->dts_params.id);
> > + goto fman_node_put;
> > + }
>
> Why is name NULL? If you just want to get the first/only clock without
> needing a name, why not use of_clk_get(fm_node, 0)?
>
It's possible, done.
>
> > +
> > + clk_rate = clk_get_rate(clk);
> > + if (!clk_rate) {
> > + pr_err("Failed to determine FM%d clock rate\n",
> > + fman->dts_params.id);
> > + goto fman_node_put;
> > + }
> > + /* Rounding to MHz */
> > + fman->dts_params.clk_freq = (u16)((clk_rate + 500000) / 1000000);
>
> DIV_ROUND_UP()
>
OK.
> > +
> > + u32_prop = (const u32 *)of_get_property(fm_node,
> > + "fsl,qman-channel-range",
> > + &lenp);
> > + if (!u32_prop) {
> > + pr_err("of_get_property(%s, fsl,qman-channel-range)
> failed\n",
> > + fm_node->full_name);
> > + goto fman_node_put;
> > + }
> > + if (WARN_ON(lenp != sizeof(u32) * 2))
> > + goto fman_node_put;
> > + fman->dts_params.qman_channel_base = u32_prop[0];
> > + fman->dts_params.num_of_qman_channels = u32_prop[1];
>
> fdt32_to_cpu()
>
Done.
> > +
> > + /* Get the MURAM base address and size */
> > + muram_node = of_find_matching_node(fm_node,
> fman_muram_match);
> > + if (!muram_node) {
> > + pr_err("could not find MURAM node\n");
> > + goto fman_node_put;
> > + }
> > +
> > + err = of_address_to_resource(muram_node, 0, res);
> > + if (err) {
> > + of_node_put(muram_node);
> > + pr_err("of_address_to_resource() = %d\n", err);
> > + goto fman_node_put;
> > + }
> > +
> > + fman->dts_params.muram_phy_base_addr = res->start;
> > + fman->dts_params.muram_size = res->end + 1 - res->start;
>
> Why not just put a struct resource in fman->dts_params?
Changed this code. dts_params holds resource structure for MURAM.
In addition, I'm using resource_size instead of calculating the size.
>
> > + {
> > + /* In B4 rev 2.0 (and above) the MURAM size is 512KB.
> > + * Check the SVR and update MURAM size if required.
> > + */
> > + u32 svr;
> > +
> > + svr = mfspr(SPRN_SVR);
> > +
> > + if ((SVR_SOC_VER(svr) == SVR_B4860) && (SVR_MAJ(svr) >=
> 2))
> > + fman->dts_params.muram_size = 0x80000;
> > + }
>
> Why wasn't the MURAM size described in the device tree, as it was with
> CPM/QE?
>
MURAM size described by the device-tree.
In B4860 rev 2.0 (and above) MURAM size is bigger.
This is workaround, in order to have the same device tree for all B4860 revisions.
> > +
> > + of_node_put(muram_node);
> > + of_node_put(fm_node);
> > +
> > + err = devm_request_irq(&of_dev->dev, irq, fman_irq,
> > + IRQF_NO_SUSPEND, "fman", fman);
> > + if (err < 0) {
> > + pr_err("Error: allocating irq %d (error = %d)\n", irq, err);
> > + goto fman_free;
> > + }
>
> Why IRQF_NO_SUSPEND?
>
It shouldn't be IRQF_NO_SUSPEND for now, removed.
> Also please use dev_err where possible.
>
Done.
> > +static const struct of_device_id fman_match[] = {
> > + {
> > + .compatible = "fsl,fman"},
> > + {}
> > +};
>
> Whitespace
>
Removed.
> > +
> > +MODULE_DEVICE_TABLE(of, fm_match);
> > +
> > +static struct platform_driver fman_driver = {
> > + .driver = {
> > + .name = "fsl-fman",
> > + .of_match_table = fman_match,
> > + },
> > + .probe = fman_probe,
> > +};
>
> Whitespace
>
Removed.
> > +/* Parse results memory layout */
> > +struct fman_prs_result {
> > + u8 lpid; /* Logical port id */
> > + u8 shimr; /* Shim header result */
> > + u16 l2r; /* Layer 2 result */
> > + u16 l3r; /* Layer 3 result */
> > + u8 l4r; /* Layer 4 result */
> > + u8 cplan; /* Classification plan id */
> > + u16 nxthdr; /* Next Header */
> > + u16 cksum; /* Running-sum */
> > + /* Flags&fragment-offset field of the last IP-header */
> > + u16 flags_frag_off;
> > + /* Routing type field of a IPV6 routing extension header */
> > + u8 route_type;
> > + /* Routing Extension Header Present; last bit is IP valid */
> > + u8 rhp_ip_valid;
> > + u8 shim_off[2]; /* Shim offset */
> > + u8 ip_pid_off; /* IP PID (last IP-proto) offset */
> > + u8 eth_off; /* ETH offset */
> > + u8 llc_snap_off; /* LLC_SNAP offset */
> > + u8 vlan_off[2]; /* VLAN offset */
> > + u8 etype_off; /* ETYPE offset */
> > + u8 pppoe_off; /* PPP offset */
> > + u8 mpls_off[2]; /* MPLS offset */
> > + u8 ip_off[2]; /* IP offset */
> > + u8 gre_off; /* GRE offset */
> > + u8 l4_off; /* Layer 4 offset */
> > + u8 nxthdr_off; /** Parser end point */
> > +} __attribute__((__packed__));
>
> Why is this packed?
>
Removed __packed__ attribute.
> Why does "Parser end point" have a kerneldoc comment?
>
Removed.
> > +
> > +/**
> > + * fman_get_revision
> > + * @fman - Pointer to the FMan module
> > + * @rev_info - A structure of revision information
> parameters.
> > + *
> > + * Returns the FM revision
> > + *
> > + * Allowed only following fman_init().
> > + *
> > + * Return: 0 on success; Error code otherwise.
> > + */
> > +void fman_get_revision(struct fman *fman, struct fman_rev_info
> > +*rev_info);
> > +
> > +/**
> > + * fman_register_intr
> > + * @fman: A Pointer to FMan device
> > + * @mod: Calling module
> > + * @mod_id: Module id (if more than 1 exists, '0' if not)
> > + * @intr_type: Interrupt type (error/normal) selection.
> > + * @f_isr: The interrupt service routine.
> > + * @h_src_arg: Argument to be passed to f_isr.
> > + *
> > + * Used to register an event handler to be processed by FMan
> > + *
> > + * Return: 0 on success; Error code otherwise.
> > + */
> > +void fman_register_intr(struct fman *fman, enum fman_event_modules
> mod,
> > + u8 mod_id, enum fman_intr_type intr_type,
> > + void (*f_isr)(void *h_src_arg), void *h_src_arg);
> > +
> > +/**
> > + * fman_unregister_intr
> > + * @fman: A Pointer to FMan device
> > + * @mod: Calling module
> > + * @mod_id: Module id (if more than 1 exists, '0' if not)
> > + * @intr_type: Interrupt type (error/normal) selection.
> > + *
> > + * Used to unregister an event handler to be processed by FMan
> > + *
> > + * Return: 0 on success; Error code otherwise.
> > + */
> > +void fman_unregister_intr(struct fman *fman, enum
> fman_event_modules mod,
> > + u8 mod_id, enum fman_intr_type intr_type);
> > +
> > +/**
> > + * fman_set_port_params
> > + * @fman: A Pointer to FMan device
> > + * @port_params: Port parameters
> > + *
> > + * Used by FMan Port to pass parameters to the FMan
> > + *
> > + * Return: 0 on success; Error code otherwise.
> > + */
> > +int fman_set_port_params(struct fman *fman,
> > + struct fman_port_init_params *port_params);
> > +
> > +/**
> > + * fman_reset_mac
> > + * @fman: A Pointer to FMan device
> > + * @mac_id: MAC id to be reset
> > + *
> > + * Reset a specific MAC
> > + *
> > + * Return: 0 on success; Error code otherwise.
> > + */
> > +int fman_reset_mac(struct fman *fman, u8 mac_id);
> > +
> > +/**
> > + * fman_get_clock_freq
> > + * @fman: A Pointer to FMan device
> > + *
> > + * Get FMan clock frequency
> > + *
> > + * Return: FMan clock frequency
> > + */
> > +
> > +u16 fman_get_clock_freq(struct fman *fman);
> > +
> > +/**
> > + * fman_get_bmi_max_fifo_size
> > + * @fman: A Pointer to FMan device
> > + *
> > + * Get FMan maximum FIFO size
> > + *
> > + * Return: FMan Maximum FIFO size
> > + */
> > +u32 fman_get_bmi_max_fifo_size(struct fman *fman);
> > +
> > +/**
> > + * fman_set_mac_max_frame
> > + * @fman: A Pointer to FMan device
> > + * @mac_id: MAC id
> > + * @mfl: Maximum frame length
> > + *
> > + * Set maximum frame length of specific MAC in FMan driver
> > + *
> > + * Return: 0 on success; Error code otherwise.
> > + */
> > +int fman_set_mac_max_frame(struct fman *fman, u8 mac_id, u16 mfl);
> > +
> > +/**
> > + * fman_get_qman_channel_id
> > + * @fman: A Pointer to FMan device
> > + * @port_id: Port id
> > + *
> > + * Get QMan channel ID associated to the Port id
> > + *
> > + * Return: QMan channel ID
> > + */
> > +u32 fman_get_qman_channel_id(struct fman *fman, u32 port_id);
> > +
> > +/**
> > + * fman_get_mem_region
> > + * @fman: A Pointer to FMan device
> > + *
> > + * Get FMan memory region
> > + *
> > + * Return: A structure with FMan memory region information */ struct
> > +resource *fman_get_mem_region(struct fman *fman);
> > +
> > +/**
> > + * fman_get_max_frm
> > + *
> > + * Return: Max frame length configured in the FM driver */
> > +u16 fman_get_max_frm(void);
> > +
> > +/**
> > + * fman_get_rx_extra_headroom
> > + *
> > + * Return: Extra headroom size configured in the FM driver */ int
> > +fman_get_rx_extra_headroom(void);
> > +
> > +/**
> > + * fman_bind
> > + * @dev: FMan OF device pointer
> > + *
> > + * Bind to a specific FMan device.
> > + *
> > + * Allowed only after the port was created.
> > + *
> > + * Return: A pointer to the FMan device */ struct fman
> > +*fman_bind(struct device *dev);
> > +
> > +/**
> > + * fman_unbind
> > + * @fman: Pointer to the FMan device
> > + *
> > + * Un-bind from a specific FMan device.
> > + *
> > + * Allowed only after the port was created.
> > + */
> > +void fman_unbind(struct fman *fman);
> > +
> > +/**
> > + * fman_get_device
> > + * @fman: A pointer to the FMan device.
> > + *
> > + * Get the FMan device pointer
> > + *
> > + * Return: Pointer to FMan device.
> > + */
> > +struct device *fman_get_device(struct fman *fman);
>
> Usually kerneldoc comments go on the implementation, not the prototype.
>
OK, moved kernel doc to the source files, here and elsewhere.
> -Scott
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists