linux-kernel - [PATCHv2] ixgbe: Wait for 1ms, not 1us, after RST

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <1445970475-19111-1-git-send-email-dan.streetman@canonical.com>
Date:	Tue, 27 Oct 2015 14:27:55 -0400
From:	Dan Streetman <dan.streetman@...onical.com>
To:	Peter Hurley <peter@...leysoftware.com>,
	Don Skidmore <donald.c.skidmore@...el.com>,
	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Cc:	Jesse Brandeburg <jesse.brandeburg@...el.com>,
	Shannon Nelson <shannon.nelson@...el.com>,
	Carolyn Wyborny <carolyn.wyborny@...el.com>,
	Matthew Vick <matthew.vick@...el.com>,
	John Ronciak <john.ronciak@...el.com>,
	Mitch Williams <mitch.a.williams@...el.com>,
	intel-wired-lan@...ts.osuosl.org, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Dan Streetman <dan.streetman@...onical.com>,
	Dan Streetman <ddstreet@...e.org>
Subject: [PATCHv2] ixgbe: Wait for 1ms, not 1us, after RST

The driver currently waits 1us after issuing a RST, but the spec
requires it to wait 1ms.  This adds a msleep(1) before polling the
reset bit.

Signed-off-by: Dan Streetman <dan.streetman@...onical.com>
Signed-off-by: Dan Streetman <ddstreet@...e.org>
---
changes since v1:
 use msleep(1) instead of mdelay(1), per Peter Hurley
 move msleep(1) out of for loop - only msleep once, leave udelay(1)
   inside for loop
 use spec sec title instead of number, per Don Skidmore

 drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
index 4e75843..02cfa1e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
@@ -111,6 +111,13 @@ mac_reset_top:
 	IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
 	IXGBE_WRITE_FLUSH(hw);
 
+	/* From the spec "General Control Registers - Device Control Register":
+	 * "...programmers must wait approximately 1 ms after setting before
+	 *  attempting to check if the bit has cleared or to access (read
+	 *  or write) any other device register."
+	 */
+	msleep(1);
+
 	/* Poll for reset bit to self-clear indicating reset is complete */
 	for (i = 0; i < 10; i++) {
 		udelay(1);
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/