linux-kernel - [PATCH 00/12] usb: early: add support for early printk through USB3 debug port

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1446019243-5565-1-git-send-email-baolu.lu@linux.intel.com>
Date:	Wed, 28 Oct 2015 16:00:31 +0800
From:	Lu Baolu <baolu.lu@...ux.intel.com>
To:	Mathias Nyman <mathias.nyman@...el.com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Alan Stern <stern@...land.harvard.edu>
Cc:	linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
	Lu Baolu <baolu.lu@...ux.intel.com>
Subject: [PATCH 00/12] usb: early: add support for early printk through USB3 debug port

This patch series adds support for early printk through USB3 debug port.
USB3 debug port is described in xHCI specification as an optional extended
capability.

The first patch adds a file in debugfs, through which users can check
whether the debug capability is supported by a specific host controller.

Patch 2 to 10 add the driver for xHCI debug capability. It interfaces with
the register set and provides the required ops (read/write/control) to upper
layers. Early printk is one consumer of these ops. The hooks for early printk
are introduced in patch 9. This design is similar to what we have done in
drivers/usb/early/ehci-dbgp.c.

Patch 11 is a minor change to usb_debug module. This change is required to
bind usb_debug with the USB3 debug device.

Patch 12 is the design document and user guide.

Lu Baolu (12):
  usb: xhci: expose xhci extended capabilities via debugfs
  x86: fixmap: add permanent fixmap for xhci debug port
  usb: xhci: dbc: probe and setup xhci debug capability
  usb: xhci: dbc: add support for Intel xHCI dbc quirk
  usb: xhci: dbc: add debug buffer
  usb: xhci: dbc: add bulk out and bulk in interfaces
  usb: xhci: dbc: handle dbc-configured exit
  usb: xhci: dbc: handle endpoint stall
  x86: early_printk: add USB3 debug port earlyprintk support
  usb: xhci: dbc: add handshake between debug target and host
  usb: serial: usb_debug: add support for dbc debug device
  usb: doc: add document for xHCI DbC driver

 Documentation/kernel-parameters.txt |    1 +
 Documentation/usb/xhci-dbc.txt      |  325 ++++++++
 MAINTAINERS                         |    8 +
 arch/x86/Kconfig.debug              |   12 +
 arch/x86/include/asm/fixmap.h       |    4 +
 arch/x86/kernel/early_printk.c      |    5 +
 drivers/usb/early/Makefile          |    1 +
 drivers/usb/early/xhci-dbc.c        | 1407 +++++++++++++++++++++++++++++++++++
 drivers/usb/host/xhci-dbg.c         |  212 ++++++
 drivers/usb/host/xhci-ext-caps.h    |    9 +-
 drivers/usb/host/xhci.c             |   27 +-
 drivers/usb/host/xhci.h             |   10 +
 drivers/usb/serial/usb_debug.c      |   29 +-
 include/linux/usb/xhci-dbc.h        |  224 ++++++
 14 files changed, 2269 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/usb/xhci-dbc.txt
 create mode 100644 drivers/usb/early/xhci-dbc.c
 create mode 100644 include/linux/usb/xhci-dbc.h

-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/