linux-kernel - Re: [PATCH v12 5/6] ARM: socfpga: add bindings document for fpga bridge drivers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20151028092907.GH1166@pengutronix.de>
Date:	Wed, 28 Oct 2015 10:29:07 +0100
From:	Steffen Trumtrar <s.trumtrar@...gutronix.de>
To:	atull@...nsource.altera.com
Cc:	gregkh@...uxfoundation.org,
	Moritz Fischer <moritz.fischer@...us.com>,
	Josh Cartwright <joshc@...com>, monstr@...str.eu,
	michal.simek@...inx.com, Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Jonathan Corbet <corbet@....net>, linux-kernel@...r.kernel.org,
	devicetree@...r.kernel.org, linux-doc@...r.kernel.org,
	pantelis.antoniou@...sulko.com, delicious.quinoa@...il.com,
	dinguyen@...nsource.altera.com,
	Matthew Gerlach <mgerlach@...era.com>
Subject: Re: [PATCH v12 5/6] ARM: socfpga: add bindings document for fpga
 bridge drivers

Hi!

On Tue, Oct 27, 2015 at 05:09:14PM -0500, atull@...nsource.altera.com wrote:
> From: Alan Tull <atull@...nsource.altera.com>
> 
> Add bindings documentation for Altera SOCFPGA bridges:
>  * fpga2sdram
>  * fpga2hps
>  * hps2fpga
>  * lwhps2fpga
> 
> Signed-off-by: Alan Tull <dinguyen@...nsource.altera.com>
> Signed-off-by: Dinh Nguyen <dinguyen@...nsource.altera.com>
> Signed-off-by: Matthew Gerlach <mgerlach@...era.com>
> ---
> v2:  separate into 2 documents for the 2 drivers
> v12: bump version to line up with simple-fpga-bus version
>      remove Linux specific notes such as references to sysfs
>      move non-DT specific documentation elsewhere
>      remove bindings that would have been used to pass configuration
>      clean up formatting
> ---
>  .../bindings/fpga/altera-fpga2sdram-bridge.txt     |   18 ++++++++++
>  .../bindings/fpga/altera-hps2fpga-bridge.txt       |   36 ++++++++++++++++++++
>  2 files changed, 54 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
>  create mode 100644 Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
> 
> diff --git a/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
> new file mode 100644
> index 0000000..11eb5b7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
> @@ -0,0 +1,18 @@
> +Altera FPGA To SDRAM Bridge Driver
> +
> +Required properties:
> +- compatible		: Should contain "altr,socfpga-fpga2sdram-bridge"
> +
> +Optional properties:
> +- label			: User-readable name for this bridge.
> +			  Default is br<device#>
> +- init-val		: 0 if driver should disable bridge at startup
> +			  1 if driver should enable bridge at startup
> +			  Default is to leave bridge in current state.

I know, that there are bindings, that configure via devicetree, but AFAIK
this is not okay.

> +
> +Example:
> +	fpga2sdram_br: fpgabridge@3 {
> +		compatible = "altr,socfpga-fpga2sdram-bridge";
> +		label = "fpga2sdram";
> +		init-val = <0>;
> +	};
> diff --git a/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
> new file mode 100644
> index 0000000..eb52f3b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
> @@ -0,0 +1,36 @@
> +Altera FPGA/HPS Bridge Driver
> +
> +Required properties:
> +- compatible	: Should contain one of:
> +		  "altr,socfpga-hps2fpga-bridge",
> +		  "altr,socfpga-lwhps2fpga-bridge", or
> +		  "altr,socfpga-fpga2hps-bridge"
> +- clocks	: Clocks used by this module.
> +
> +Optional properties:
> +- label		: User-readable name for this bridge.
> +		  Default is br<device#>
> +- init-val	: 0 if driver should disable bridge at startup.
> +		  1 if driver should enable bridge at startup.
> +		  Default is to leave bridge in its current state.
> +
> +Example:
> +	hps_fpgabridge0: fpgabridge@0 {
> +		compatible = "altr,socfpga-hps2fpga-bridge";
> +		label = "hps2fpga";
> +		clocks = <&l4_main_clk>;
> +		init-val = <1>;
> +	};
> +
> +	hps_fpgabridge1: fpgabridge@1 {
> +		compatible = "altr,socfpga-lwhps2fpga-bridge";
> +		label = "lwhps2fpga";
> +		clocks = <&l4_main_clk>;
> +		init-val = <0>;
> +	};
> +
> +	hps_fpgabridge2: fpgabridge@2 {
> +		compatible = "altr,socfpga-fpga2hps-bridge";
> +		label = "fpga2hps";
> +		clocks = <&l4_main_clk>;
> +	};

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/