[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1446038045-17102-14-git-send-email-ygardi@codeaurora.org>
Date: Wed, 28 Oct 2015 15:14:03 +0200
From: Yaniv Gardi <ygardi@...eaurora.org>
To: robherring2@...il.com, James.Bottomley@...senPartnership.com,
pebolle@...cali.nl, hch@...radead.org
Cc: linux-kernel@...r.kernel.org, linux-scsi@...r.kernel.org,
linux-arm-msm@...r.kernel.org, santoshsy@...il.com,
linux-scsi-owner@...r.kernel.org, subhashj@...eaurora.org,
ygardi@...eaurora.org, gbroner@...eaurora.org,
draviv@...eaurora.org, Vinayak Holikatti <vinholikatti@...il.com>,
"James E.J. Bottomley" <JBottomley@...n.com>
Subject: [PATCH v6 13/15] scsi: ufs: add missing memory barriers
Performing several writes to UFS host controller registers has
no guarantee of ordering, so we must make sure register writes
to setup request list base address etc. are performed before the
run/stop register is enabled.
In addition, when setting up a task request, we must make sure
the updating of descriptors takes places before ringing the
doorbell, similarly to setting up a transfer request.
Reviewed-by: Dolev Raviv <draviv@...eaurora.org>
Signed-off-by: Gilad Broner <gbroner@...eaurora.org>
Signed-off-by: Yaniv Gardi <ygardi@...eaurora.org>
---
drivers/scsi/ufs/ufshcd.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 24a879d..dfc4ac1 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -402,11 +402,9 @@ static inline int ufshcd_get_lists_status(u32 reg)
* 1 UTRLRDY
* 2 UTMRLRDY
* 3 UCRDY
- * 4 HEI
- * 5 DEI
- * 6-7 reserved
+ * 4-7 reserved
*/
- return (((reg) & (0xFF)) >> 1) ^ (0x07);
+ return ((reg & 0xFF) >> 1) ^ 0x07;
}
/**
@@ -2727,7 +2725,7 @@ out:
* To bring UFS host controller to operational state,
* 1. Enable required interrupts
* 2. Configure interrupt aggregation
- * 3. Program UTRL and UTMRL base addres
+ * 3. Program UTRL and UTMRL base address
* 4. Configure run-stop-registers
*
* Returns 0 on success, non-zero value on failure
@@ -2757,8 +2755,13 @@ static int ufshcd_make_hba_operational(struct ufs_hba *hba)
REG_UTP_TASK_REQ_LIST_BASE_H);
/*
+ * Make sure base address and interrupt setup are updated before
+ * enabling the run/stop registers below.
+ */
+ wmb();
+
+ /*
* UCRDY, UTMRLDY and UTRLRDY bits must be 1
- * DEI, HEI bits must be 0
*/
reg = ufshcd_readl(hba, REG_CONTROLLER_STATUS);
if (!(ufshcd_get_lists_status(reg))) {
@@ -3921,6 +3924,10 @@ static int ufshcd_issue_tm_cmd(struct ufs_hba *hba, int lun_id, int task_id,
/* send command to the controller */
__set_bit(free_slot, &hba->outstanding_tasks);
+
+ /* Make sure descriptors are ready before ringing the task doorbell */
+ wmb();
+
ufshcd_writel(hba, 1 << free_slot, REG_UTP_TASK_REQ_DOOR_BELL);
spin_unlock_irqrestore(host->host_lock, flags);
--
1.8.5.2
--
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists