| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <3e6dafce0f659ca2510750f1e03dbba4bc5767c9.1446192980.git.yu.c.chen@intel.com>
Date: Fri, 30 Oct 2015 16:31:47 +0800
From: Chen Yu <yu.c.chen@...el.com>
To: rui.zhang@...el.com, edubezval@...il.com
Cc: javi.merino@....com, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, <stable@...r.kernel.org>,
Chen Yu <yu.c.chen@...el.com>
Subject: [PATCH 1/3][v3] Thermal: initialize thermal zone device correctly
From: Zhang Rui <rui.zhang@...el.com>
After thermal zone device registered, as we have not read any
temperature before, thus tz->temperature should not be 0,
which actually means 0C, and thermal trend is not available.
In this case, we need specially handling for the first
thermal_zone_device_update().
Both thermal core framework and step_wise governor is
enhanced to handle this. And since the step_wise governor
is the only one that uses trends, so it's the only thermal
governor that needs to be updated.
CC: <stable@...r.kernel.org> #3.18+
Tested-by: Manuel Krause <manuelkrause@...scape.net>
Tested-by: szegad <szegadlo@...zta.onet.pl>
Tested-by: prash <prash.n.rao@...il.com>
Tested-by: amish <ammdispose-arch@...oo.com>
Tested-by: Matthias <morpheusxyz123@...oo.de>
Reviewed-by: Javi Merino <javi.merino@....com>
Signed-off-by: Zhang Rui <rui.zhang@...el.com>
Signed-off-by: Chen Yu <yu.c.chen@...el.com>
---
drivers/thermal/step_wise.c | 17 +++++++++++++++--
drivers/thermal/thermal_core.c | 19 +++++++++++++++++--
drivers/thermal/thermal_core.h | 1 +
include/linux/thermal.h | 3 +++
4 files changed, 36 insertions(+), 4 deletions(-)
diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c
index 2f9f708..ea9366a 100644
--- a/drivers/thermal/step_wise.c
+++ b/drivers/thermal/step_wise.c
@@ -63,6 +63,19 @@ static unsigned long get_target_state(struct thermal_instance *instance,
next_target = instance->target;
dev_dbg(&cdev->device, "cur_state=%ld\n", cur_state);
+ if (!instance->initialized) {
+ if (throttle) {
+ next_target = (cur_state + 1) >= instance->upper ?
+ instance->upper :
+ ((cur_state + 1) < instance->lower ?
+ instance->lower : (cur_state + 1));
+ } else {
+ next_target = THERMAL_NO_TARGET;
+ }
+
+ return next_target;
+ }
+
switch (trend) {
case THERMAL_TREND_RAISING:
if (throttle) {
@@ -149,7 +162,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
dev_dbg(&instance->cdev->device, "old_target=%d, target=%d\n",
old_target, (int)instance->target);
- if (old_target == instance->target)
+ if (instance->initialized && old_target == instance->target)
continue;
/* Activate a passive thermal instance */
@@ -161,7 +174,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
instance->target == THERMAL_NO_TARGET)
update_passive_instance(tz, trip_type, -1);
-
+ instance->initialized = true;
instance->cdev->updated = false; /* cdev needs update */
}
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index d9e525c..682bc1e 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -532,8 +532,22 @@ static void update_temperature(struct thermal_zone_device *tz)
mutex_unlock(&tz->lock);
trace_thermal_temperature(tz);
- dev_dbg(&tz->device, "last_temperature=%d, current_temperature=%d\n",
- tz->last_temperature, tz->temperature);
+ if (tz->last_temperature == THERMAL_TEMP_INVALID)
+ dev_dbg(&tz->device, "last_temperature N/A, current_temperature=%d\n",
+ tz->temperature);
+ else
+ dev_dbg(&tz->device, "last_temperature=%d, current_temperature=%d\n",
+ tz->last_temperature, tz->temperature);
+}
+
+static void thermal_zone_device_reset(struct thermal_zone_device *tz)
+{
+ struct thermal_instance *pos;
+
+ tz->temperature = THERMAL_TEMP_INVALID;
+ tz->passive = 0;
+ list_for_each_entry(pos, &tz->thermal_instances, tz_node)
+ pos->initialized = false;
}
void thermal_zone_device_update(struct thermal_zone_device *tz)
@@ -1900,6 +1914,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
INIT_DELAYED_WORK(&(tz->poll_queue), thermal_zone_device_check);
+ thermal_zone_device_reset(tz);
thermal_zone_device_update(tz);
return tz;
diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h
index d7ac1fc..749d41a 100644
--- a/drivers/thermal/thermal_core.h
+++ b/drivers/thermal/thermal_core.h
@@ -41,6 +41,7 @@ struct thermal_instance {
struct thermal_zone_device *tz;
struct thermal_cooling_device *cdev;
int trip;
+ bool initialized;
unsigned long upper; /* Highest cooling state for this trip point */
unsigned long lower; /* Lowest cooling state for this trip point */
unsigned long target; /* expected cooling state */
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index 157d366..5bcabc7 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -43,6 +43,9 @@
/* Default weight of a bound cooling device */
#define THERMAL_WEIGHT_DEFAULT 0
+/* use value, which < 0K, to indicate an invalid/uninitialized temperature */
+#define THERMAL_TEMP_INVALID -274000
+
/* Unit conversion macros */
#define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732 >= 0) ? \
((long)t-2732+5)/10 : ((long)t-2732-5)/10)
--
1.8.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists