[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJKOXPcDea5vjX+-tDg=7Z2kPrtsEABybA0+nEPGJDVwaYvb1Q@mail.gmail.com>
Date: Fri, 30 Oct 2015 10:52:53 +0900
From: Krzysztof Kozlowski <k.kozlowski@...sung.com>
To: Ramakrishna Pallala <ramakrishna.pallala@...el.com>
Cc: linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
devicetree@...r.kernel.org, Sebastian Reichel <sre@...nel.org>,
Jenny Tc <jenny.tc@...el.com>,
Andreas Dannenberg <dannenberg@...com>
Subject: Re: [PATCH 1/2] dt: power: Add support for TI BQ24261 charger
2015-10-30 1:37 GMT+09:00 Ramakrishna Pallala <ramakrishna.pallala@...el.com>:
> This patch adds the device tree documentation for TI BQ24261 charger.
>
> Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@...el.com>
> Signed-off-by: Jenny TC <jenny.tc@...el.com>
> ---
> .../devicetree/bindings/power/bq24261.txt | 34 ++++++++++++++++++++
> 1 file changed, 34 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/bq24261.txt
>
> diff --git a/Documentation/devicetree/bindings/power/bq24261.txt b/Documentation/devicetree/bindings/power/bq24261.txt
> new file mode 100644
> index 0000000..e18f6dc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/bq24261.txt
> @@ -0,0 +1,34 @@
> +Binding for TI bq24261 Li-Ion Charger
> +
> +Required properties:
> +- compatible: Should contain one of the following:
> + * "ti,bq24261"
Just: 'should be "ti,bq24261"'.
> +- reg: integer, i2c address of the device.
> +- ti,battery-regulation-voltage: integer, maximum charging voltage in uV.
> +- ti,charge-current: integer, maximum charging current in uA.
> +- ti,termination-current: integer, charge will be terminated when current in
> + constant-voltage phase drops below this value (in uA).
Same as proposed extension of bq24257.txt. I like it.
> +
> +Optional properties:
> +- ti,max-charge-current: integer, maximum charging current (in uA);
I did not look at the code yet but description of property is exactly
the same as "ti,charge-current"... Two different properties with same
description?
> +- ti,max-charge-voltage: integer, maximum charging voltage (in uV);
Ditto.
> +- ti,min-charge-temperature: integer, minimum charging temperature (in DegC);
> +- ti,max-charge-temperature: integer, maximum charging temperature (in DegC).
> +- ti,thermal-sensing: integer, enable(1) or disable(0) JEITA thermal control.
You made it integer instead of boolean, so just to be sure - you
expect the possibility of overriding this property or extending it in
further devices?
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists