[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAL_JsqJJjtAXzi-3Aeb6pwwSUUv0i9g0g43Fq60CeSmNEiYoaQ@mail.gmail.com>
Date: Sat, 31 Oct 2015 13:44:15 -0500
From: Rob Herring <robh+dt@...nel.org>
To: "Andrew F. Davis" <afd@...com>
Cc: Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Jonathan Cameron <jic23@...nel.org>,
Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald <pmeerw@...erw.net>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-iio@...r.kernel.org" <linux-iio@...r.kernel.org>,
"linux-api@...r.kernel.org" <linux-api@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/2] Documentation: afe4404: Add DT bindings for the
AFE4404 heart monitor
gmail thinks this is spam BTW.
On Sat, Oct 31, 2015 at 11:31 AM, Andrew F. Davis <afd@...com> wrote:
> Add the TI afe4404 heart monitor DT bindings documentation.
> Create health directory created under iio.
>
> Signed-off-by: Andrew F. Davis <afd@...com>
> ---
> .../devicetree/bindings/iio/health/afe4404.txt | 27 ++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/health/afe4404.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/health/afe4404.txt b/Documentation/devicetree/bindings/iio/health/afe4404.txt
> new file mode 100644
> index 0000000..d377033
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/health/afe4404.txt
> @@ -0,0 +1,27 @@
> +* Texas Instruments AFE4404 Heart rate and Pulse Oximeter
> +
> +Required properties:
> + - compatible : Should be "ti,afe4404".
> + - reg : I2C address of the device.
> + - led-supply : Regulator supply to the device.
Is led correct name or copy-n-paste? The datasheet has tx_sup and
rx_sup for supplies.
> + - interrupt-parent : Phandle to he parent interrupt controller.
> + - interrupts : The interrupt line the device ADC_RDY pin is connected to.
> +
> +Optional properties:
> + - reset-gpios : GPIO used to reset the device.
> +
> +Example:
> +
> +&i2c2 {
> + heart_mon@58 {
> + compatible = "ti,afe4404";
> + reg = <0x58>;
> +
> + led-supply = <&vbat>;
> +
> + interrupt-parent = <&gpio1>;
> + interrupts = <28 IRQ_TYPE_EDGE_RISING>;
> +
> + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
> + };
> +};
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists