| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1446458641-4447-1-git-send-email-alim.akhtar@samsung.com>
Date: Mon, 02 Nov 2015 15:34:00 +0530
From: Alim Akhtar <alim.akhtar@...sung.com>
To: linux-samsung-soc@...r.kernel.org
Cc: k.kozlowski@...sung.com, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
kgene@...nel.org
Subject: [PATCH 1/2] arm64: dts: exynos7: Add pmic s2mps15 device tree node
This patch add pmic (s2mps15) node of espresso board,
which includes addition of regulators and pmic-clk sub-nodes.
Signed-off-by: Abhilash Kesavan <a.kesavan@...sung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@...sung.com>
---
This patch should go in after driver side changes [1] lands.
[1]-> https://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg47736.html
arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 349 +++++++++++++++++++++++
1 file changed, 349 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index 838a3626dac1..8ce04a0ec928 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -53,6 +53,355 @@
status = "okay";
};
+&hsi2c_4 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <200000>;
+ status = "okay";
+
+ s2mps15_pmic@66 {
+ compatible = "samsung,s2mps15-pmic";
+ reg = <0x66>;
+ interrupts = <2 0>;
+ interrupt-parent = <&gpa0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq>;
+ wakeup-source;
+
+ s2mps15_osc: clocks {
+ compatible = "samsung,s2mps13-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s2mps13_ap", "s2mps13_cp",
+ "s2mps13_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "vdd_ldo1";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "vdd_ldo2";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <125>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "vdd_ldo3";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "vdd_ldo4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1110000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "vdd_ldo5";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "vdd_ldo6";
+ regulator-min-microvolt = <2250000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "vdd_ldo7";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "vdd_ldo8";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "vdd_ldo9";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "vdd_ldo10";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "vdd_ldo11";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "vdd_ldo12";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "vdd_ldo13";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "vdd_ldo14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3375000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "vdd_ldo15";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2275000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "vdd_ldo16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "vdd_ldo17";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3375000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "vdd_ldo18";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2275000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "vdd_ldo19";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3375000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "vdd_ldo20";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2275000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "vdd_ldo21";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3375000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "vdd_ldo22";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "vdd_ldo23";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2275000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "vdd_ldo24";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3375000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "vdd_ldo25";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3375000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "vdd_ldo26";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1470000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "vdd_ldo27";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2275000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <25000>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_atlas";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_apollo";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "vdd_buck5";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-ramp-delay = <25000>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "vdd_buck7";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <25000>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "vdd_buck8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <25000>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vdd_buck9";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <25000>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "vdd_buck10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <25000>;
+ regulator-enable-ramp-delay = <250>;
+ };
+ };
+ };
+};
+
+&pinctrl_alive {
+ pmic_irq: pmic-irq {
+ samsung,pins = "gpa0-2";
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+};
+
&mmc_0 {
status = "okay";
num-slots = <1>;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists