| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20151102145420.GA7963@lunn.ch>
Date: Mon, 2 Nov 2015 15:54:20 +0100
From: Andrew Lunn <andrew@...n.ch>
To: Neil Armstrong <narmstrong@...libre.com>
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
"David S. Miller" <davem@...emloft.net>,
Florian Fainelli <f.fainelli@...il.com>,
Guenter Roeck <linux@...ck-us.net>,
Vivien Didelot <vivien.didelot@...oirfairelinux.com>
Subject: Re: [RFC PATCH net-next 5/6] net: dsa: mv88e6060: add register
defines header file
On Mon, Nov 02, 2015 at 11:57:27AM +0100, Neil Armstrong wrote:
> To align with the mv88e6xxx code, add a similar header file
> with all the register defines.
> The file is based on the mv88e6xxx header for coherency.
Hi Neil
I did a --side-by-side diff between this and mv88e6xxx.h. I don't
think there is enough the same to allow using mv88e6xxx.c functions
with the mv88e6060 driver :-(
Andrew
>
> Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
> ---
> drivers/net/dsa/mv88e6060.h | 108 ++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 108 insertions(+)
> create mode 100644 drivers/net/dsa/mv88e6060.h
>
> diff --git a/drivers/net/dsa/mv88e6060.h b/drivers/net/dsa/mv88e6060.h
> new file mode 100644
> index 0000000..ed3b3ac
> --- /dev/null
> +++ b/drivers/net/dsa/mv88e6060.h
> @@ -0,0 +1,108 @@
> +/*
> + * net/dsa/mv88e6060.h - Marvell 88e6060 switch chip support
> + * Copyright (c) 2008 Marvell Semiconductor
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef __MV88E6060_H
> +#define __MV88E6060_H
> +
> +#define MV88E6060_PORTS 6
> +
> +#define REG_PORT(p) (0x8 + (p))
> +#define PORT_STATUS 0x00
> +#define PORT_STATUS_PAUSE_EN BIT(15)
> +#define PORT_STATUS_MY_PAUSE BIT(14)
> +#define PORT_STATUS_FC (PORT_STATUS_MY_PAUSE | PORT_STATUS_PAUSE_EN)
> +#define PORT_STATUS_RESOLVED BIT(13)
> +#define PORT_STATUS_LINK BIT(12)
> +#define PORT_STATUS_PORTMODE BIT(11)
> +#define PORT_STATUS_PHYMODE BIT(10)
> +#define PORT_STATUS_DUPLEX BIT(9)
> +#define PORT_STATUS_SPEED BIT(8)
> +#define PORT_SWITCH_ID 0x03
> +#define PORT_SWITCH_ID_6060 0x0600
> +#define PORT_SWITCH_ID_6060_MASK 0xfff0
> +#define PORT_SWITCH_ID_6060_R1 0x0601
> +#define PORT_SWITCH_ID_6060_R2 0x0602
> +#define PORT_CONTROL 0x04
> +#define PORT_CONTROL_FORCE_FLOW_CTRL BIT(15)
> +#define PORT_CONTROL_TRAILER BIT(14)
> +#define PORT_CONTROL_HEADER BIT(11)
> +#define PORT_CONTROL_INGRESS_MODE BIT(8)
> +#define PORT_CONTROL_VLAN_TUNNEL BIT(7)
> +#define PORT_CONTROL_STATE_MASK 0x03
> +#define PORT_CONTROL_STATE_DISABLED 0x00
> +#define PORT_CONTROL_STATE_BLOCKING 0x01
> +#define PORT_CONTROL_STATE_LEARNING 0x02
> +#define PORT_CONTROL_STATE_FORWARDING 0x03
> +#define PORT_VLAN_MAP 0x06
> +#define PORT_VLAN_MAP_DBNUM_SHIFT 12
> +#define PORT_VLAN_MAP_TABLE_MASK 0x1f
> +#define PORT_ASSOC_VECTOR 0x0b
> +#define PORT_ASSOC_VECTOR_MONITOR BIT(15)
> +#define PORT_ASSOC_VECTOR_PAV_MASK 0x1f
> +#define PORT_RX_CNTR 0x10
> +#define PORT_TX_CNTR 0x11
> +
> +#define REG_GLOBAL 0x0f
> +#define GLOBAL_STATUS 0x00
> +#define GLOBAL_STATUS_SW_MODE_MASK (0x3 << 12)
> +#define GLOBAL_STATUS_SW_MODE_0 (0x0 << 12)
> +#define GLOBAL_STATUS_SW_MODE_1 (0x1 << 12)
> +#define GLOBAL_STATUS_SW_MODE_2 (0x2 << 12)
> +#define GLOBAL_STATUS_SW_MODE_3 (0x3 << 12)
> +#define GLOBAL_STATUS_INIT_READY BIT(11)
> +#define GLOBAL_STATUS_ATU_FULL BIT(3)
> +#define GLOBAL_STATUS_ATU_DONE BIT(2)
> +#define GLOBAL_STATUS_PHY_INT BIT(1)
> +#define GLOBAL_STATUS_EEINT BIT(0)
> +#define GLOBAL_MAC_01 0x01
> +#define GLOBAL_MAC_01_DIFF_ADDR BIT(8)
> +#define GLOBAL_MAC_23 0x02
> +#define GLOBAL_MAC_45 0x03
> +#define GLOBAL_CONTROL 0x04
> +#define GLOBAL_CONTROL_DISCARD_EXCESS BIT(13)
> +#define GLOBAL_CONTROL_MAX_FRAME_1536 BIT(10)
> +#define GLOBAL_CONTROL_RELOAD_EEPROM BIT(9)
> +#define GLOBAL_CONTROL_CTRMODE BIT(8)
> +#define GLOBAL_CONTROL_ATU_FULL_EN BIT(3)
> +#define GLOBAL_CONTROL_ATU_DONE_EN BIT(2)
> +#define GLOBAL_CONTROL_PHYINT_EN BIT(1)
> +#define GLOBAL_CONTROL_EEPROM_DONE_EN BIT(0)
> +#define GLOBAL_ATU_CONTROL 0x0a
> +#define GLOBAL_ATU_CONTROL_SWRESET BIT(15)
> +#define GLOBAL_ATU_CONTROL_LEARNDIS BIT(14)
> +#define GLOBAL_ATU_CONTROL_ATUSIZE_256 (0x0 << 12)
> +#define GLOBAL_ATU_CONTROL_ATUSIZE_512 (0x1 << 12)
> +#define GLOBAL_ATU_CONTROL_ATUSIZE_1024 (0x2 << 12)
> +#define GLOBAL_ATU_CONTROL_ATE_AGE_SHIFT 4
> +#define GLOBAL_ATU_CONTROL_ATE_AGE_MASK (0xff << 4)
> +#define GLOBAL_ATU_CONTROL_ATE_AGE_5MIN (0x13 << 4)
> +#define GLOBAL_ATU_OP 0x0b
> +#define GLOBAL_ATU_OP_BUSY BIT(15)
> +#define GLOBAL_ATU_OP_NOP (0 << 12)
> +#define GLOBAL_ATU_OP_FLUSH_ALL ((1 << 12) | GLOBAL_ATU_OP_BUSY)
> +#define GLOBAL_ATU_OP_FLUSH_UNLOCKED ((2 << 12) | GLOBAL_ATU_OP_BUSY)
> +#define GLOBAL_ATU_OP_LOAD_DB ((3 << 12) | GLOBAL_ATU_OP_BUSY)
> +#define GLOBAL_ATU_OP_GET_NEXT_DB ((4 << 12) | GLOBAL_ATU_OP_BUSY)
> +#define GLOBAL_ATU_OP_FLUSH_DB ((5 << 12) | GLOBAL_ATU_OP_BUSY)
> +#define GLOBAL_ATU_OP_FLUSH_UNLOCKED_DB ((6 << 12) | GLOBAL_ATU_OP_BUSY)
> +#define GLOBAL_ATU_DATA 0x0c
> +#define GLOBAL_ATU_DATA_PORT_VECTOR_MASK 0x3f0
> +#define GLOBAL_ATU_DATA_PORT_VECTOR_SHIFT 4
> +#define GLOBAL_ATU_DATA_STATE_MASK 0x0f
> +#define GLOBAL_ATU_DATA_STATE_UNUSED 0x00
> +#define GLOBAL_ATU_DATA_STATE_UC_STATIC 0x0e
> +#define GLOBAL_ATU_DATA_STATE_UC_LOCKED 0x0f
> +#define GLOBAL_ATU_DATA_STATE_MC_STATIC 0x07
> +#define GLOBAL_ATU_DATA_STATE_MC_LOCKED 0x0e
> +#define GLOBAL_ATU_MAC_01 0x0d
> +#define GLOBAL_ATU_MAC_23 0x0e
> +#define GLOBAL_ATU_MAC_45 0x0f
> +
> +#endif
> --
> 1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists