lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Tue,  3 Nov 2015 16:14:07 +0800
From:	Lu Baolu <baolu.lu@...ux.intel.com>
To:	Mathias Nyman <mathias.nyman@...el.com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Alan Stern <stern@...land.harvard.edu>
Cc:	linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
	Lu Baolu <baolu.lu@...ux.intel.com>
Subject: [PATCH v2 07/12] usb: xhci: dbc: handle dbc-configured exit

DbC might exit configured state in some cases (refer to 7.6.4.4 in
xHCI spec 1.1). Software needs detect and clear this situation by
clearing DCCTRL.DCR and wait until the DbC configured before read
or write oprations.

Signed-off-by: Lu Baolu <baolu.lu@...ux.intel.com>
---
 drivers/usb/early/xhci-dbc.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/usb/early/xhci-dbc.c b/drivers/usb/early/xhci-dbc.c
index f51daa4..8a5a51f 100644
--- a/drivers/usb/early/xhci-dbc.c
+++ b/drivers/usb/early/xhci-dbc.c
@@ -1153,6 +1153,29 @@ static int xdbc_wait_until_bulk_done(struct xdbc_trb *trb, int loops)
 	return -EIO;
 }
 
+static int xdbc_wait_until_dbc_configured(void)
+{
+	int timeout = 0;
+	u32 reg;
+
+	/* Port exits configured state */
+	reg = readl(&xdbcp->xdbc_reg->control);
+	if (!(reg & CTRL_DRC))
+		return 0;
+
+	/* clear run change bit (RW1C) */
+	writel(reg | CTRL_DRC, &xdbcp->xdbc_reg->control);
+
+	do {
+		if (readl(&xdbcp->xdbc_reg->control) & CTRL_DCR)
+			return 0;
+
+		xdbc_udelay(10);
+	} while (timeout++ < XDBC_LOOPS);
+
+	return -ETIMEDOUT;
+}
+
 static int xdbc_bulk_transfer(void *data, int size, int loops, bool read)
 {
 	u64 addr;
@@ -1167,6 +1190,11 @@ static int xdbc_bulk_transfer(void *data, int size, int loops, bool read)
 		return -EINVAL;
 	}
 
+	if (xdbc_wait_until_dbc_configured()) {
+		xdbc_trace("%s: hardware not ready\n", __func__);
+		return -EPERM;
+	}
+
 	ring = (read ? &xdbcp->in_ring : &xdbcp->out_ring);
 	trb = ring->enqueue;
 	cycle = ring->cycle_state;
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ