| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1446551754-26208-2-git-send-email-mike.looijmans@topic.nl>
Date: Tue, 3 Nov 2015 12:55:52 +0100
From: Mike Looijmans <mike.looijmans@...ic.nl>
To: linux-clk@...r.kernel.org
Cc: mturquette@...libre.com, sboyd@...eaurora.org,
linux-kernel@...r.kernel.org,
Mike Looijmans <mike.looijmans@...ic.nl>
Subject: [PATCH 1/3] drivers/clk/Kconfig: Use "help" only once
Use only the plain "help" header. No functional change, only cosmetic.
This Kconfig file has entries using "help", "---help---" and, probably in
an attempt to be extra helpful, some entires have both. With people like
me usually copying an existing entry, the duplicates have been spreading.
A quick survey in the kernel using grep revealed that simply "help" is
most commonly used, so convert all entries to only use a single "help"
header line.
Signed-off-by: Mike Looijmans <mike.looijmans@...ic.nl>
---
drivers/clk/Kconfig | 33 +++++++++++++++------------------
1 file changed, 15 insertions(+), 18 deletions(-)
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 42f7120..7205d2b 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -14,7 +14,7 @@ config COMMON_CLK
select HAVE_CLK_PREPARE
select CLKDEV_LOOKUP
select SRCU
- ---help---
+ help
The common clock framework is a single definition of struct
clk, useful across many platforms, as well as an
implementation of the clock API in include/linux/clk.h.
@@ -27,7 +27,7 @@ menu "Common Clock Framework"
config COMMON_CLK_WM831X
tristate "Clock driver for WM831x/2x PMICs"
depends on MFD_WM831X
- ---help---
+ help
Supports the clocking subsystem of the WM831x/2x series of
PMICs from Wolfson Microelectronics.
@@ -40,20 +40,20 @@ config COMMON_CLK_MAX77686
tristate "Clock driver for Maxim 77686 MFD"
depends on MFD_MAX77686
select COMMON_CLK_MAX_GEN
- ---help---
+ help
This driver supports Maxim 77686 crystal oscillator clock.
config COMMON_CLK_MAX77802
tristate "Clock driver for Maxim 77802 PMIC"
depends on MFD_MAX77686
select COMMON_CLK_MAX_GEN
- ---help---
+ help
This driver supports Maxim 77802 crystal oscillator clock.
config COMMON_CLK_RK808
tristate "Clock driver for RK808"
depends on MFD_RK808
- ---help---
+ help
This driver supports RK808 crystal oscillator clock. These
multi-function devices have two fixed-rate oscillators,
clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
@@ -64,7 +64,7 @@ config COMMON_CLK_SI5351
depends on I2C
select REGMAP_I2C
select RATIONAL
- ---help---
+ help
This driver supports Silicon Labs 5351A/B/C programmable clock
generators.
@@ -74,7 +74,6 @@ config COMMON_CLK_SI570
depends on OF
select REGMAP_I2C
help
- ---help---
This driver supports Silicon Labs 570/571/598/599 programmable
clock generators.
@@ -84,7 +83,6 @@ config COMMON_CLK_CDCE925
depends on OF
select REGMAP_I2C
help
- ---help---
This driver supports the TI CDCE925 programmable clock synthesizer.
The chip contains two PLLs with spread-spectrum clocking support and
five output dividers. The driver only supports the following setup,
@@ -98,7 +96,7 @@ config COMMON_CLK_CDCE925
config COMMON_CLK_S2MPS11
tristate "Clock driver for S2MPS1X/S5M8767 MFD"
depends on MFD_SEC_CORE
- ---help---
+ help
This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator
clock. These multi-function devices have two (S2MPS14) or three
(S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each.
@@ -106,7 +104,7 @@ config COMMON_CLK_S2MPS11
config CLK_TWL6040
tristate "External McPDM functional clock from twl6040"
depends on TWL6040_CORE
- ---help---
+ help
Enable the external functional clock support on OMAP4+ platforms for
McPDM. McPDM module is using the external bit clock on the McPDM bus
as functional clock.
@@ -115,14 +113,13 @@ config COMMON_CLK_AXI_CLKGEN
tristate "AXI clkgen driver"
depends on ARCH_ZYNQ || MICROBLAZE
help
- ---help---
Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
FPGAs. It is commonly used in Analog Devices' reference designs.
config CLK_QORIQ
bool "Clock driver for Freescale QorIQ platforms"
depends on (PPC_E500MC || ARM) && OF
- ---help---
+ help
This adds the clock driver support for Freescale QorIQ platforms
using common clock framework.
@@ -130,33 +127,33 @@ config COMMON_CLK_XGENE
bool "Clock driver for APM XGene SoC"
default y
depends on ARM64
- ---help---
+ help
Sypport for the APM X-Gene SoC reference, PLL, and device clocks.
config COMMON_CLK_KEYSTONE
tristate "Clock drivers for Keystone based SOCs"
depends on ARCH_KEYSTONE && OF
- ---help---
+ help
Supports clock drivers for Keystone based SOCs. These SOCs have local
a power sleep control module that gate the clock to the IPs and PLLs.
config COMMON_CLK_PALMAS
tristate "Clock driver for TI Palmas devices"
depends on MFD_PALMAS
- ---help---
+ help
This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO
using common clock framework.
config COMMON_CLK_PWM
tristate "Clock driver for PWMs used as clock outputs"
depends on PWM
- ---help---
+ help
Adapter driver so that any PWM output can be (mis)used as clock signal
at 50% duty cycle.
config COMMON_CLK_PXA
def_bool COMMON_CLK && ARCH_PXA
- ---help---
+ help
Sypport for the Marvell PXA SoC.
config COMMON_CLK_CDCE706
@@ -164,7 +161,7 @@ config COMMON_CLK_CDCE706
depends on I2C
select REGMAP_I2C
select RATIONAL
- ---help---
+ help
This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.
source "drivers/clk/bcm/Kconfig"
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists