| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHp75Vcrx+Rkz2mDSG+GEUW6LdO0w6On=6UoV4fhZK27Ayf1zQ@mail.gmail.com>
Date: Wed, 4 Nov 2015 21:59:13 +0200
From: Andy Shevchenko <andy.shevchenko@...il.com>
To: Sowmini Varadhan <sowmini.varadhan@...cle.com>
Cc: intel-wired-lan@...ts.osuosl.org, netdev <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
jeffrey.t.kirsher@...el.com, jesse.brandeburg@...el.com,
shannon.nelson@...el.com, carolyn.wyborny@...el.com,
donald.c.skidmore@...el.com, matthew.vick@...el.com,
john.ronciak@...el.com, mitch.a.williams@...el.com
Subject: Re: [PATCH v5] i40e: Look up MAC address in Open Firmware or IDPROM
On Wed, Nov 4, 2015 at 9:39 PM, Sowmini Varadhan
<sowmini.varadhan@...cle.com> wrote:
>
> This is the i40e equivalent of commit c762dff24c06 ("ixgbe: Look up MAC
> address in Open Firmware or IDPROM").
>
> As with that fix, attempt to look up the MAC address in Open Firmware
> on systems that support it, and use IDPROM on SPARC if no OF address
> is found.
>
> In the case of the i40e there is an assumption that the default mac
> address has already been set up as the primary mac filter on probe,
> so if this filter is obtained from the Open Firmware or IDPROM, an
> explicit write is needed via i40e_aq_mac_address_write() and
> i40e_aq_add_macvlan() invocation.
>
Few comments (mostly stylish)
And take my
Reviewed-by: Andy Shevchenko <andy.shevchenko@...il.com>
> Reviewed-by: Martin K. Petersen <martin.petersen@...cle.com>
> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@...cle.com>
> ---
> v2, v3: Andy Shevchenko comments
> v4: Shannon Nelson review: explicitly set up mac filters before register_netdev
> v5: Shannon Nelson code style comments
>
> drivers/net/ethernet/intel/i40e/i40e_main.c | 84 ++++++++++++++++++++++++++-
> 1 files changed, 83 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
> index b825f97..a3883cf 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_main.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
> @@ -24,6 +24,15 @@
> *
> ******************************************************************************/
>
> +#include <linux/etherdevice.h>
> +#include <linux/of_net.h>
> +#include <linux/pci.h>
> +
> +#ifdef CONFIG_SPARC
> +#include <asm/idprom.h>
> +#include <asm/prom.h>
> +#endif
> +
> /* Local includes */
> #include "i40e.h"
> #include "i40e_diag.h"
> @@ -9213,6 +9222,44 @@ static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
> }
>
> /**
> + * i40e_macaddr_init - explicitly write the mac address filters. This
> + * is needed when the macaddr has been obtained by other means than
> + * the default, e.g., from Open Firmware or IDPROM.
> + *
> + * @vsi: pointer to the vsi.
> + * @macaddr: the MAC address
> + *
> + * Returns 0 on success, negative on failure
Usually the structure of kernel doc is something like following
/**
* func - summary
* @paramx: desc
*
* Description:
* Long description in many lines and / or paragraphs
*
* Returns:
* 0 on success or errno otherwise.
*/
> + **/
No need two stars.
> +static int i40e_macaddr_init(struct i40e_vsi *vsi, u8 *macaddr)
> +{
> + int ret, aq_err;
> + struct i40e_aqc_add_macvlan_element_data element;
Usually
struct something whatever;
int ret;
looks better.
> +
> + ret = i40e_aq_mac_address_write(&vsi->back->hw,
> + I40E_AQC_WRITE_TYPE_LAA_WOL,
> + macaddr, NULL);
> + if (ret) {
> + dev_info(&vsi->back->pdev->dev,
> + "Addr change for VSI failed: %d\n", ret);
dev_err() or dev_warn() I would say.
> + return -EADDRNOTAVAIL;
> + }
> +
> + memset(&element, 0, sizeof(element));
> + ether_addr_copy(element.mac_addr, macaddr);
> + element.flags = cpu_to_le16(I40E_AQC_MACVLAN_ADD_PERFECT_MATCH);
> + ret = i40e_aq_add_macvlan(&vsi->back->hw, vsi->seid, &element, 1, NULL);
> + aq_err = vsi->back->hw.aq.asq_last_status;
Do you really need a separate variable (aq_err)?
> + if (aq_err != I40E_AQ_RC_OK) {
> + dev_info(&vsi->back->pdev->dev,
> + "add filter failed err %s aq_err %s\n",
> + i40e_stat_str(&vsi->back->hw, ret),
> + i40e_aq_str(&vsi->back->hw, aq_err));
> + }
> + return ret;
> +}
> +
> +/**
> * i40e_vsi_setup - Set up a VSI by a given type
> * @pf: board private structure
> * @type: VSI type
> @@ -9341,6 +9388,9 @@ struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
> ret = i40e_config_netdev(vsi);
> if (ret)
> goto err_netdev;
> + ret = i40e_macaddr_init(vsi, pf->hw.mac.addr);
> + if (ret)
> + goto err_netdev;
> ret = register_netdev(vsi->netdev);
> if (ret)
> goto err_netdev;
> @@ -10163,6 +10213,36 @@ static void i40e_print_features(struct i40e_pf *pf)
> }
>
> /**
> + * i40e_get_platform_mac_addr - get mac address from Open Firmware
> + * or IDPROM if supported by the platform
> + *
> + * @pdev: PCI device information struct
> + * @mac_addr: the MAC address to be returned
> + *
> + * Look up the MAC address in Open Firmware on systems that support it,
> + * and use IDPROM on SPARC if no OF address is found.
> + *
> + * Returns 0 on success, negative on failure
> + **/
Same about kernel doc.
> +static int i40e_get_platform_mac_addr(struct pci_dev *pdev, u8 *mac_addr)
> +{
> + struct device_node *dp = pci_device_to_OF_node(pdev);
> + const unsigned char *addr;
> +
> + addr = of_get_mac_address(dp);
> + if (addr) {
> + ether_addr_copy(mac_addr, addr);
> + return 0;
> + }
> +#ifdef CONFIG_SPARC
> + ether_addr_copy(mac_addr, idprom->id_ethaddr);
> + return 0;
> +#else
> + return -EINVAL;
> +#endif /* CONFIG_SPARC */
> +}
> +
> +/**
> * i40e_probe - Device initialization routine
> * @pdev: PCI device information struct
> * @ent: entry in i40e_pci_tbl
> @@ -10360,7 +10440,9 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
> i40e_aq_stop_lldp(hw, true, NULL);
> }
>
> - i40e_get_mac_addr(hw, hw->mac.addr);
> + err = i40e_get_platform_mac_addr(pdev, hw->mac.addr);
> + if (err)
> + i40e_get_mac_addr(hw, hw->mac.addr);
> if (!is_valid_ether_addr(hw->mac.addr)) {
> dev_info(&pdev->dev, "invalid MAC address %pM\n", hw->mac.addr);
> err = -EIO;
> --
> 1.7.1
>
--
With Best Regards,
Andy Shevchenko
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists