| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <563A8A05.6020401@gmail.com>
Date: Wed, 04 Nov 2015 14:43:17 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: Vivien Didelot <vivien.didelot@...oirfairelinux.com>,
netdev@...r.kernel.org
CC: linux-kernel@...r.kernel.org, kernel@...oirfairelinux.com,
"David S. Miller" <davem@...emloft.net>,
Andrew Lunn <andrew@...n.ch>
Subject: Re: [PATCH net] net: dsa: mv88e6xxx: isolate unbridged ports
On 04/11/15 14:23, Vivien Didelot wrote:
> The DSA documentation specifies that each port must be capable of
> forwarding frames to the CPU port. The last changes on bridging support
> for the mv88e6xxx driver broke this requirement for non-bridged ports.
>
> So as for the bridged ports, reserve a few VLANs (4000+) in the switch
> to isolate ports that have not been bridged yet.
>
> By default, a port will be isolated with the CPU and DSA ports. When the
> port joins a bridge, it will leave its reserved port. When it is removed
> from a bridge, it will join its reserved VLAN again.
This looks fine but the logic is a little hard to understand at first
glance.
>
> Fixes: 5fe7f68016ff ("net: dsa: mv88e6xxx: fix hardware bridging")
> Reported-by: Andrew Lunn <andrew@...n.ch>
> Signed-off-by: Vivien Didelot <vivien.didelot@...oirfairelinux.com>
> ---
> drivers/net/dsa/mv88e6171.c | 2 ++
> drivers/net/dsa/mv88e6352.c | 2 ++
> drivers/net/dsa/mv88e6xxx.c | 42 ++++++++++++++++++++++++++++++++++++++++++
> drivers/net/dsa/mv88e6xxx.h | 2 ++
> 4 files changed, 48 insertions(+)
>
> diff --git a/drivers/net/dsa/mv88e6171.c b/drivers/net/dsa/mv88e6171.c
> index 54aa000..6e18213 100644
> --- a/drivers/net/dsa/mv88e6171.c
> +++ b/drivers/net/dsa/mv88e6171.c
> @@ -103,6 +103,8 @@ struct dsa_switch_driver mv88e6171_switch_driver = {
> #endif
> .get_regs_len = mv88e6xxx_get_regs_len,
> .get_regs = mv88e6xxx_get_regs,
> + .port_join_bridge = mv88e6xxx_port_bridge_join,
> + .port_leave_bridge = mv88e6xxx_port_bridge_leave,
> .port_stp_update = mv88e6xxx_port_stp_update,
> .port_pvid_get = mv88e6xxx_port_pvid_get,
> .port_vlan_prepare = mv88e6xxx_port_vlan_prepare,
> diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c
> index ff846d0..cc6c545 100644
> --- a/drivers/net/dsa/mv88e6352.c
> +++ b/drivers/net/dsa/mv88e6352.c
> @@ -323,6 +323,8 @@ struct dsa_switch_driver mv88e6352_switch_driver = {
> .set_eeprom = mv88e6352_set_eeprom,
> .get_regs_len = mv88e6xxx_get_regs_len,
> .get_regs = mv88e6xxx_get_regs,
> + .port_join_bridge = mv88e6xxx_port_bridge_join,
> + .port_leave_bridge = mv88e6xxx_port_bridge_leave,
> .port_stp_update = mv88e6xxx_port_stp_update,
> .port_pvid_get = mv88e6xxx_port_pvid_get,
> .port_vlan_prepare = mv88e6xxx_port_vlan_prepare,
> diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
> index 04cff58..b06dba0 100644
> --- a/drivers/net/dsa/mv88e6xxx.c
> +++ b/drivers/net/dsa/mv88e6xxx.c
> @@ -1462,6 +1462,10 @@ int mv88e6xxx_port_vlan_prepare(struct dsa_switch *ds, int port,
> const struct switchdev_obj_port_vlan *vlan,
> struct switchdev_trans *trans)
> {
> + /* We reserve a few VLANs to isolate unbridged ports */
> + if (vlan->vid_end >= 4000)
> + return -EOPNOTSUPP;
Since this constant is repeated 3 times, you might want to create a
local define for it and size it based on the number of ports present in
the switch rather than leaving 95 numbers?
> +
> /* We don't need any dynamic resource from the kernel (yet),
> * so skip the prepare phase.
> */
> @@ -1870,6 +1874,36 @@ unlock:
> return err;
> }
>
> +int mv88e6xxx_port_bridge_join(struct dsa_switch *ds, int port, u32 members)
> +{
> + struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
> + const u16 pvid = 4000 + ds->index * DSA_MAX_PORTS + port;
> + int err;
> +
> + /* The port joined a bridge, so leave its reserved VLAN */
> + mutex_lock(&ps->smi_mutex);
> + err = _mv88e6xxx_port_vlan_del(ds, port, pvid);
> + if (!err)
> + err = _mv88e6xxx_port_pvid_set(ds, port, 0);
Does that mean that the following happens:
- bridge is created and port joins it
- port is configured to be in pvid 0 while joining
- port is then configured again by the bridge layer to be in whatever
pvid the user has decided
The other question is, does that break isolation between multiple
bridges on the same switch? Should we use the bridge ifindex here
somehow as a pvid indication?
> + mutex_unlock(&ps->smi_mutex);
> + return err;
> +}
> +
> +int mv88e6xxx_port_bridge_leave(struct dsa_switch *ds, int port, u32 members)
> +{
> + struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
> + const u16 pvid = 4000 + ds->index * DSA_MAX_PORTS + port;
> + int err;
> +
> + /* The port left the bridge, so join its reserved VLAN */
> + mutex_lock(&ps->smi_mutex);
> + err = _mv88e6xxx_port_vlan_add(ds, port, pvid, true);
> + if (!err)
> + err = _mv88e6xxx_port_pvid_set(ds, port, pvid);
> + mutex_unlock(&ps->smi_mutex);
> + return err;
> +}
> +
> static void mv88e6xxx_bridge_work(struct work_struct *work)
> {
> struct mv88e6xxx_priv_state *ps;
> @@ -2140,6 +2174,14 @@ int mv88e6xxx_setup_ports(struct dsa_switch *ds)
> ret = mv88e6xxx_setup_port(ds, i);
> if (ret < 0)
> return ret;
> +
> + if (dsa_is_cpu_port(ds, i) || dsa_is_dsa_port(ds, i))
> + continue;
> +
> + /* setup the unbridged state */
> + ret = mv88e6xxx_port_bridge_leave(ds, i, 0);
> + if (ret < 0)
> + return ret;
> }
> return 0;
> }
> diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
> index fb9a873..21c8daa 100644
> --- a/drivers/net/dsa/mv88e6xxx.h
> +++ b/drivers/net/dsa/mv88e6xxx.h
> @@ -468,6 +468,8 @@ int mv88e6xxx_phy_write_indirect(struct dsa_switch *ds, int addr, int regnum,
> int mv88e6xxx_get_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e);
> int mv88e6xxx_set_eee(struct dsa_switch *ds, int port,
> struct phy_device *phydev, struct ethtool_eee *e);
> +int mv88e6xxx_port_bridge_join(struct dsa_switch *ds, int port, u32 members);
> +int mv88e6xxx_port_bridge_leave(struct dsa_switch *ds, int port, u32 members);
> int mv88e6xxx_port_stp_update(struct dsa_switch *ds, int port, u8 state);
> int mv88e6xxx_port_vlan_prepare(struct dsa_switch *ds, int port,
> const struct switchdev_obj_port_vlan *vlan,
>
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists