lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <c4070eeceb0fdf6a6ab56fcaef1769d01dd01c7e.1446687367.git.viresh.kumar@linaro.org>
Date:	Thu,  5 Nov 2015 07:11:54 +0530
From:	Viresh Kumar <viresh.kumar@...aro.org>
To:	Rafael Wysocki <rjw@...ysocki.net>, robh+dt@...nel.org,
	sboyd@...eaurora.org, lee.jones@...aro.org
Cc:	linaro-kernel@...ts.linaro.org, linux-pm@...r.kernel.org,
	mark.rutland@....com, pawel.moll@....com,
	ijc+devicetree@...lion.org.uk, galak@...eaurora.org, nm@...com,
	devicetree@...r.kernel.org, b.zolnierkie@...sung.com,
	m.szyprowski@...sung.com, Viresh Kumar <viresh.kumar@...aro.org>,
	linux-kernel@...r.kernel.org (open list),
	"Rafael J. Wysocki" <rafael.j.wysocki@...el.com>
Subject: [PATCH V2 3/5] PM / OPP: Remove 'operating-points-names' binding

These aren't used until now by any DT files and wouldn't be used now as
we have a better scheme in place now, i.e. opp-property-<name>
properties.

Remove the (useless) binding without breaking ABI.

Reviewed-by: Stephen Boyd <sboyd@...eaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@...aro.org>
---
 Documentation/devicetree/bindings/opp/opp.txt | 62 +--------------------------
 1 file changed, 2 insertions(+), 60 deletions(-)

diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index 61c6f25cf8e2..30c4bb3718bc 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -45,21 +45,10 @@ Devices supporting OPPs must set their "operating-points-v2" property with
 phandle to a OPP table in their DT node. The OPP core will use this phandle to
 find the operating points for the device.
 
-Devices may want to choose OPP tables at runtime and so can provide a list of
-phandles here. But only *one* of them should be chosen at runtime. This must be
-accompanied by a corresponding "operating-points-names" property, to uniquely
-identify the OPP tables.
-
 If required, this can be extended for SoC vendor specfic bindings. Such bindings
 should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt
 and should have a compatible description like: "operating-points-v2-<vendor>".
 
-Optional properties:
-- operating-points-names: Names of OPP tables (required if multiple OPP
-  tables are present), to uniquely identify them. The same list must be present
-  for all the CPUs which are sharing clock/voltage rails and hence the OPP
-  tables.
-
 * OPP Table Node
 
 This describes the OPPs belonging to a device. This node can have following
@@ -454,54 +443,7 @@ Example 4: Handling multiple regulators
 	};
 };
 
-Example 5: Multiple OPP tables
-
-/ {
-	cpus {
-		cpu@0 {
-			compatible = "arm,cortex-a7";
-			...
-
-			cpu-supply = <&cpu_supply>
-			operating-points-v2 = <&cpu0_opp_table_slow>, <&cpu0_opp_table_fast>;
-			operating-points-names = "slow", "fast";
-		};
-	};
-
-	cpu0_opp_table_slow: opp_table_slow {
-		compatible = "operating-points-v2";
-		status = "okay";
-		opp-shared;
-
-		opp00 {
-			opp-hz = /bits/ 64 <600000000>;
-			...
-		};
-
-		opp01 {
-			opp-hz = /bits/ 64 <800000000>;
-			...
-		};
-	};
-
-	cpu0_opp_table_fast: opp_table_fast {
-		compatible = "operating-points-v2";
-		status = "okay";
-		opp-shared;
-
-		opp10 {
-			opp-hz = /bits/ 64 <1000000000>;
-			...
-		};
-
-		opp11 {
-			opp-hz = /bits/ 64 <1100000000>;
-			...
-		};
-	};
-};
-
-Example 6: opp-supported-hw
+Example 5: opp-supported-hw
 (example: three level hierarchy of versions: cuts, substrate and process)
 
 / {
@@ -546,7 +488,7 @@ Example 6: opp-supported-hw
 	};
 };
 
-Example 7: opp-microvolt-<name>, opp-microamp-<name>, turbo-mode-<name>,
+Example 6: opp-microvolt-<name>, opp-microamp-<name>, turbo-mode-<name>,
 opp-suspend-<name>:
 (example: device with two possible microvolt ranges: slow and fast)
 
-- 
2.6.2.198.g614a2ac

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ