lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <87vb9fiqfy.wl%kuninori.morimoto.gx@renesas.com>
Date:	Fri, 6 Nov 2015 06:42:38 +0000
From:	Kuninori Morimoto <kuninori.morimoto.gx@...esas.com>
To:	Kuninori Morimoto <kuninori.morimoto.gx@...esas.com>
CC:	Stephen Boyd <sboyd@...eaurora.org>, Simon <horms@...ge.net.au>,
	"Michael Turquette" <mturquette@...libre.com>,
	Magnus <magnus.damm@...il.com>,
	Linux-SH <linux-sh@...r.kernel.org>,
	Linux-Kernel <linux-kernel@...r.kernel.org>,
	<linux-clk@...r.kernel.org>
Subject: Re: [PATCH v5] clk: add CS2000 Fractional-N driver

Hi again

ping again ?

> [R] 森本 wrote:
> > 
> > From: Kuninori Morimoto <kuninori.morimoto.gx@...esas.com>
> > 
> > This patch adds CS2000 Fractional-N driver as clock provider.
> > 
> > Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@...esas.com>
> > ---
> > v4 -> v5
> > 
> >  - remove "clock-frequency"
> >  - use dev on clk_register()
> >  - remove CLK_IS_BASIC
> >  - .enable -> .prepare since it is using I2C
> >  . .disabe -> .unprepare since it is using I2C
> > 
> >  .../devicetree/bindings/clock/cs2000-cp.txt        |  22 +
> >  drivers/clk/Kconfig                                |   6 +
> >  drivers/clk/Makefile                               |   1 +
> >  drivers/clk/clk-cs2000-cp.c                        | 510 +++++++++++++++++++++
> >  4 files changed, 539 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/clock/cs2000-cp.txt
> >  create mode 100644 drivers/clk/clk-cs2000-cp.c
> > 
> > diff --git a/Documentation/devicetree/bindings/clock/cs2000-cp.txt b/Documentation/devicetree/bindings/clock/cs2000-cp.txt
> > new file mode 100644
> > index 0000000..54e6df0
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/cs2000-cp.txt
> > @@ -0,0 +1,22 @@
> > +CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier
> > +
> > +Required properties:
> > +
> > +- compatible:		"cirrus,cs2000-cp"
> > +- reg:			The chip select number on the I2C bus
> > +- clocks:		common clock binding for CLK_IN, XTI/REF_CLK
> > +- clock-names:		CLK_IN : clk_in, XTI/REF_CLK : ref_clk
> > +- #clock-cells:		must be <0>
> > +
> > +Example:
> > +
> > +&i2c2 {
> > +	...
> > +	cs2000: clk_multiplier@4f {
> > +		#clock-cells = <0>;
> > +		compatible = "cirrus,cs2000-cp";
> > +		reg = <0x4f>;
> > +		clocks = <&rcar_sound 0>, <&x12_clk>;
> > +		clock-names = "clk_in", "ref_clk";
> > +	};
> > +};
> > diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> > index 42f7120..0e961b2 100644
> > --- a/drivers/clk/Kconfig
> > +++ b/drivers/clk/Kconfig
> > @@ -95,6 +95,12 @@ config COMMON_CLK_CDCE925
> >  	  Given a target output frequency, the driver will set the PLL and
> >  	  divider to best approximate the desired output.
> >  
> > +config COMMON_CLK_CS2000_CP
> > +	tristate "Clock driver for CS2000 Fractional-N Clock Synthesizer & Clock Multiplier"
> > +	depends on I2C
> > +	help
> > +	  If you say yes here you get support for the CS2000 clock multiplier.
> > +
> >  config COMMON_CLK_S2MPS11
> >  	tristate "Clock driver for S2MPS1X/S5M8767 MFD"
> >  	depends on MFD_SEC_CORE
> > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> > index 9d31e2c..2fb77a8 100644
> > --- a/drivers/clk/Makefile
> > +++ b/drivers/clk/Makefile
> > @@ -21,6 +21,7 @@ obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN)	+= clk-axi-clkgen.o
> >  obj-$(CONFIG_ARCH_AXXIA)		+= clk-axm5516.o
> >  obj-$(CONFIG_ARCH_BCM2835)		+= clk-bcm2835.o
> >  obj-$(CONFIG_COMMON_CLK_CDCE706)	+= clk-cdce706.o
> > +obj-$(CONFIG_COMMON_CLK_CS2000_CP)	+= clk-cs2000-cp.o
> >  obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
> >  obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
> >  obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
> > diff --git a/drivers/clk/clk-cs2000-cp.c b/drivers/clk/clk-cs2000-cp.c
> > new file mode 100644
> > index 0000000..71d9340
> > --- /dev/null
> > +++ b/drivers/clk/clk-cs2000-cp.c
> > @@ -0,0 +1,510 @@
> > +/*
> > + * CS2000  --  CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier
> > + *
> > + * Copyright (C) 2015 Renesas Electronics Corporation
> > + * Kuninori Morimoto <kuninori.morimoto.gx@...esas.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +#include <linux/clk-provider.h>
> > +#include <linux/delay.h>
> > +#include <linux/clk.h>
> > +#include <linux/i2c.h>
> > +#include <linux/of_device.h>
> > +#include <linux/module.h>
> > +
> > +#define CH_MAX 4
> > +
> > +#define DEVICE_ID	0x1
> > +#define DEVICE_CTRL	0x2
> > +#define DEVICE_CFG1	0x3
> > +#define DEVICE_CFG2	0x4
> > +#define GLOBAL_CFG	0x5
> > +#define Ratio_Add(x, nth)	(6 + (x * 4) + (nth))
> > +#define Ratio_Val(x, nth)	((x >> (24 - (8 * nth))) & 0xFF)
> > +#define Val_Ratio(x, nth)	((x & 0xFF) << (24 - (8 * nth)))
> > +#define FUNC_CFG1	0x16
> > +#define FUNC_CFG2	0x17
> > +
> > +/* DEVICE_CTRL */
> > +#define PLL_UNLOCK	(1 << 7)
> > +
> > +/* DEVICE_CFG1 */
> > +#define RSEL(x)		(((x) & 0x3) << 3)
> > +#define RSEL_MASK	RSEL(0x3)
> > +#define ENDEV1		(0x1)
> > +
> > +/* GLOBAL_CFG */
> > +#define ENDEV2		(0x1)
> > +
> > +#define CH_SIZE_ERR(ch)		((ch < 0) || (ch >= CH_MAX))
> > +#define hw_to_priv(_hw)		container_of(_hw, struct cs2000_priv, hw)
> > +#define priv_to_client(priv)	(priv->client)
> > +#define priv_to_dev(priv)	(&(priv_to_client(priv)->dev))
> > +
> > +#define CLK_IN	0
> > +#define REF_CLK	1
> > +#define CLK_MAX 2
> > +
> > +struct cs2000_priv {
> > +	struct clk_hw hw;
> > +	struct i2c_client *client;
> > +	struct clk *clk_in;
> > +	struct clk *ref_clk;
> > +	struct clk *clk_out;
> > +};
> > +
> > +static const struct of_device_id cs2000_of_match[] = {
> > +	{ .compatible = "cirrus,cs2000-cp", },
> > +	{},
> > +};
> > +MODULE_DEVICE_TABLE(of, cs2000_of_match);
> > +
> > +static const struct i2c_device_id cs2000_id[] = {
> > +	{ "cs2000-cp", },
> > +	{}
> > +};
> > +MODULE_DEVICE_TABLE(i2c, cs2000_id);
> > +
> > +#define cs2000_read(priv, addr) \
> > +	i2c_smbus_read_byte_data(priv_to_client(priv), addr)
> > +#define cs2000_write(priv, addr, val) \
> > +	i2c_smbus_write_byte_data(priv_to_client(priv), addr, val)
> > +
> > +static int cs2000_bset(struct cs2000_priv *priv, u8 addr, u8 mask, u8 val)
> > +{
> > +	s32 data;
> > +
> > +	data = cs2000_read(priv, addr);
> > +	if (data < 0)
> > +		return data;
> > +
> > +	data &= ~mask;
> > +	data |= (val & mask);
> > +
> > +	return cs2000_write(priv, addr, data);
> > +}
> > +
> > +static int cs2000_enable_dev_config(struct cs2000_priv *priv, bool enable)
> > +{
> > +	u32 val;
> > +	int ret;
> > +
> > +	val = enable ? ENDEV1 : 0;
> > +	ret = cs2000_bset(priv, DEVICE_CFG1, ENDEV1, val);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	val = enable ? ENDEV2 : 0;
> > +	ret = cs2000_bset(priv, GLOBAL_CFG,  ENDEV2, val);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	return 0;
> > +}
> > +
> > +static int cs2000_clk_in_bound_rate(struct cs2000_priv *priv,
> > +				    u32 rate_in)
> > +{
> > +	u32 val;
> > +
> > +	if (rate_in >= 32000000 &&
> > +	    rate_in < 56000000)
> > +		val = 0x0;
> > +	else if (rate_in >= 16000000 &&
> > +		 rate_in < 28000000)
> > +		val = 0x1;
> > +	else if (rate_in >= 8000000 &&
> > +		 rate_in < 14000000)
> > +		val = 0x2;
> > +	else
> > +		return -EINVAL;
> > +
> > +	return cs2000_bset(priv, FUNC_CFG1, 0x3 << 3, val << 3);
> > +}
> > +
> > +static int cs2000_wait_pll_lock(struct cs2000_priv *priv)
> > +{
> > +	struct device *dev = priv_to_dev(priv);
> > +	s32 val;
> > +	unsigned int i;
> > +
> > +	for (i = 0; i < 256; i++) {
> > +		val = cs2000_read(priv, DEVICE_CTRL);
> > +		if (val < 0)
> > +			return val;
> > +		if (!(val & PLL_UNLOCK))
> > +			return 0;
> > +		udelay(1);
> > +	}
> > +
> > +	dev_err(dev, "pll lock failed\n");
> > +
> > +	return -EIO;
> > +}
> > +
> > +static int cs2000_clk_out_enable(struct cs2000_priv *priv, bool enable)
> > +{
> > +	u32 val = enable ? 0 : 0x3;
> > +
> > +	/* enable both AUX_OUT, CLK_OUT */
> > +	return cs2000_write(priv, DEVICE_CTRL, val);
> > +}
> > +
> > +static u32 cs2000_rate_to_ratio(u32 rate_in, u32 rate_out)
> > +{
> > +	u64 ratio;
> > +
> > +	/*
> > +	 * ratio = rate_out / rate_in * 2^20
> > +	 *
> > +	 * To avoid over flow, rate_out is u64
> > +	 * The result should be u32
> > +	 */
> > +	ratio = (u64)rate_out << 20;
> > +	do_div(ratio, rate_in);
> > +
> > +	return (u32)ratio;
> > +}
> > +
> > +static unsigned long cs2000_ratio_to_rate(u32 ratio, u32 rate_in)
> > +{
> > +	u64 rate_out;
> > +
> > +	/*
> > +	 * ratio = rate_out / rate_in * 2^20
> > +	 *
> > +	 * To avoid over flow, rate_out is u64
> > +	 * The result should be u32
> > +	 */
> > +
> > +	rate_out = (u64)ratio * rate_in;
> > +	return (unsigned long)(rate_out >> 20);
> > +}
> > +
> > +static int cs2000_ratio_set(struct cs2000_priv *priv,
> > +			    int ch, u32 rate_in, u32 rate_out)
> > +{
> > +	u32 val;
> > +	unsigned int i;
> > +	int ret;
> > +
> > +	if (CH_SIZE_ERR(ch))
> > +		return -EINVAL;
> > +
> > +	val = cs2000_rate_to_ratio(rate_in, rate_out);
> > +	for (i = 0; i < 4; i++) {
> > +		ret = cs2000_write(priv,
> > +				   Ratio_Add(ch, i),
> > +				   Ratio_Val(val, i));
> > +		if (ret < 0)
> > +			return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static u32 cs2000_ratio_get(struct cs2000_priv *priv, int ch)
> > +{
> > +	u32 tmp, val;
> > +	unsigned int i;
> > +
> > +	val = 0;
> > +	for (i = 0; i < 4; i++) {
> > +		tmp = cs2000_read(priv,
> > +				  Ratio_Add(ch, i));
> > +		if (tmp < 0)
> > +			return 0;
> > +
> > +		val |= Val_Ratio(tmp, i);
> > +	}
> > +
> > +	return val;
> > +}
> > +
> > +static int cs2000_ratio_select(struct cs2000_priv *priv, int ch)
> > +{
> > +	int ret;
> > +
> > +	if (CH_SIZE_ERR(ch))
> > +		return -EINVAL;
> > +
> > +	/*
> > +	 * FIXME
> > +	 *
> > +	 * this driver supports static ratio mode only
> > +	 * at this point
> > +	 */
> > +	ret = cs2000_bset(priv, DEVICE_CFG1, RSEL_MASK, RSEL(ch));
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = cs2000_write(priv, DEVICE_CFG2, 0x0);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	return 0;
> > +}
> > +
> > +static unsigned long cs2000_recalc_rate(struct clk_hw *hw,
> > +					unsigned long parent_rate)
> > +{
> > +	struct cs2000_priv *priv = hw_to_priv(hw);
> > +	int ch = 0; /* it uses ch0 only at this point */
> > +	u32 ratio;
> > +
> > +	ratio = cs2000_ratio_get(priv, ch);
> > +
> > +	return cs2000_ratio_to_rate(ratio, parent_rate);
> > +}
> > +
> > +static long cs2000_round_rate(struct clk_hw *hw, unsigned long rate,
> > +			      unsigned long *parent_rate)
> > +{
> > +	u32 ratio;
> > +
> > +	ratio = cs2000_rate_to_ratio(*parent_rate, rate);
> > +
> > +	return cs2000_ratio_to_rate(ratio, *parent_rate);
> > +}
> > +
> > +static int __cs2000_set_rate(struct cs2000_priv *priv, int ch,
> > +			     unsigned long rate, unsigned long parent_rate)
> > +
> > +{
> > +	int ret;
> > +
> > +	ret = cs2000_clk_in_bound_rate(priv, parent_rate);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = cs2000_ratio_set(priv, ch, parent_rate, rate);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = cs2000_ratio_select(priv, ch);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	return 0;
> > +}
> > +
> > +static int cs2000_set_rate(struct clk_hw *hw,
> > +			   unsigned long rate, unsigned long parent_rate)
> > +{
> > +	struct cs2000_priv *priv = hw_to_priv(hw);
> > +	int ch = 0; /* it uses ch0 only at this point */
> > +
> > +	return __cs2000_set_rate(priv, ch, rate, parent_rate);
> > +}
> > +
> > +static int cs2000_enable(struct clk_hw *hw)
> > +{
> > +	struct cs2000_priv *priv = hw_to_priv(hw);
> > +	int ret;
> > +
> > +	ret = cs2000_enable_dev_config(priv, true);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = cs2000_clk_out_enable(priv, true);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = cs2000_wait_pll_lock(priv);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	return ret;
> > +}
> > +
> > +static void cs2000_disable(struct clk_hw *hw)
> > +{
> > +	struct cs2000_priv *priv = hw_to_priv(hw);
> > +
> > +	cs2000_enable_dev_config(priv, false);
> > +
> > +	cs2000_clk_out_enable(priv, false);
> > +}
> > +
> > +static u8 cs2000_get_parent(struct clk_hw *hw)
> > +{
> > +	/* always return REF_CLK */
> > +	return REF_CLK;
> > +}
> > +
> > +static const struct clk_ops cs2000_ops = {
> > +	.get_parent	= cs2000_get_parent,
> > +	.recalc_rate	= cs2000_recalc_rate,
> > +	.round_rate	= cs2000_round_rate,
> > +	.set_rate	= cs2000_set_rate,
> > +	.prepare	= cs2000_enable,
> > +	.unprepare	= cs2000_disable,
> > +};
> > +
> > +static int cs2000_clk_get(struct cs2000_priv *priv)
> > +{
> > +	struct i2c_client *client = priv_to_client(priv);
> > +	struct device *dev = &client->dev;
> > +	struct clk *clk_in, *ref_clk;
> > +
> > +	clk_in = devm_clk_get(dev, "clk_in");
> > +	/* not yet provided */
> > +	if (IS_ERR(clk_in))
> > +		return -EPROBE_DEFER;
> > +
> > +	ref_clk = devm_clk_get(dev, "ref_clk");
> > +	/* not yet provided */
> > +	if (IS_ERR(ref_clk))
> > +		return -EPROBE_DEFER;
> > +
> > +	priv->clk_in	= clk_in;
> > +	priv->ref_clk	= ref_clk;
> > +
> > +	return 0;
> > +}
> > +
> > +static int cs2000_clk_register(struct cs2000_priv *priv)
> > +{
> > +	struct device *dev = priv_to_dev(priv);
> > +	struct device_node *np = dev->of_node;
> > +	struct clk_init_data init;
> > +	const char *name = np->name;
> > +	struct clk *clk;
> > +	static const char *parent_names[CLK_MAX];
> > +	int ch = 0; /* it uses ch0 only at this point */
> > +	int rate;
> > +	int ret;
> > +
> > +	of_property_read_string(np, "clock-output-names", &name);
> > +
> > +	/*
> > +	 * set default rate as 1/1.
> > +	 * otherwise .set_rate which setup ratio
> > +	 * is never called if user requests 1/1 rate
> > +	 */
> > +	rate = clk_get_rate(priv->ref_clk);
> > +	ret = __cs2000_set_rate(priv, ch, rate, rate);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	parent_names[CLK_IN]	= __clk_get_name(priv->clk_in);
> > +	parent_names[REF_CLK]	= __clk_get_name(priv->ref_clk);
> > +
> > +	init.name		= name;
> > +	init.ops		= &cs2000_ops;
> > +	init.flags		= CLK_SET_RATE_GATE;
> > +	init.parent_names	= parent_names;
> > +	init.num_parents	= ARRAY_SIZE(parent_names);
> > +
> > +	priv->hw.init = &init;
> > +
> > +	clk = clk_register(dev, &priv->hw);
> > +	if (IS_ERR(clk))
> > +		return PTR_ERR(clk);
> > +
> > +	ret = of_clk_add_provider(np, of_clk_src_simple_get, clk);
> > +	if (ret < 0) {
> > +		clk_unregister(clk);
> > +		return ret;
> > +	}
> > +
> > +	priv->clk_out = clk;
> > +
> > +	return 0;
> > +}
> > +
> > +static int cs2000_version_print(struct cs2000_priv *priv)
> > +{
> > +	struct i2c_client *client = priv_to_client(priv);
> > +	struct device *dev = &client->dev;
> > +	s32 val = cs2000_read(priv, DEVICE_ID);
> > +	const char *revision;
> > +
> > +	if (val < 0)
> > +		return val;
> > +
> > +	/* CS2000 should be 0x0 */
> > +	if (0 != (val >> 3))
> > +		return -EIO;
> > +
> > +	switch (val & 0x7) {
> > +	case 0x4:
> > +		revision = "B2 / B3";
> > +		break;
> > +	case 0x6:
> > +		revision = "C1";
> > +		break;
> > +	default:
> > +		return -EIO;
> > +	}
> > +
> > +	dev_info(dev, "revision - %s\n", revision);
> > +
> > +	return 0;
> > +}
> > +
> > +static int cs2000_remove(struct i2c_client *client)
> > +{
> > +	struct cs2000_priv *priv = i2c_get_clientdata(client);
> > +	struct device *dev = &client->dev;
> > +	struct device_node *np = dev->of_node;
> > +
> > +	of_clk_del_provider(np);
> > +
> > +	clk_unregister(priv->clk_out);
> > +
> > +	return 0;
> > +}
> > +
> > +static int cs2000_probe(struct i2c_client *client,
> > +			const struct i2c_device_id *id)
> > +{
> > +	struct cs2000_priv *priv;
> > +	struct device *dev = &client->dev;
> > +	int ret;
> > +
> > +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> > +	if (!priv)
> > +		return -ENOMEM;
> > +
> > +	priv->client = client;
> > +	i2c_set_clientdata(client, priv);
> > +
> > +	ret = cs2000_clk_get(priv);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = cs2000_clk_register(priv);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = cs2000_version_print(priv);
> > +	if (ret < 0)
> > +		goto probe_err;
> > +
> > +	return 0;
> > +
> > +probe_err:
> > +	cs2000_remove(client);
> > +
> > +	return ret;
> > +}
> > +
> > +static struct i2c_driver cs2000_driver = {
> > +	.driver = {
> > +		.name = "cs2000-cp",
> > +		.of_match_table = cs2000_of_match,
> > +	},
> > +	.probe		= cs2000_probe,
> > +	.remove		= cs2000_remove,
> > +	.id_table	= cs2000_id,
> > +};
> > +
> > +module_i2c_driver(cs2000_driver);
> > +
> > +MODULE_DESCRIPTION("CS2000-CP driver");
> > +MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@...esas.com>");
> > +MODULE_LICENSE("GPL v2");
> > -- 
> > 1.9.1
> > 
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> > the body of a message to majordomo@...r.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 
> Best regards
> ---
> Kuninori Morimoto
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ