Message-Id: <1446859442-5413-4-git-send-email-dianders@chromium.org>
Date:	Fri,  6 Nov 2015 17:24:01 -0800
From:	Douglas Anderson <dianders@...omium.org>
To:	John Youn <John.Youn@...opsys.com>, balbi@...com
Cc:	Yunzhi Li <lyz@...k-chips.com>,
	Heiko Stübner <heiko@...ech.de>,
	linux-rockchip@...ts.infradead.org,
	Julius Werner <jwerner@...omium.org>,
	gregory.herrero@...el.com, yousaf.kaukab@...el.com,
	dinguyen@...nsource.altera.com, stern@...land.harvard.edu,
	ming.lei@...onical.com, Douglas Anderson <dianders@...omium.org>,
	johnyoun@...opsys.com, gregkh@...uxfoundation.org,
	linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 3/4] usb: dwc2: host: Add a delay before releasing periodic bandwidth

We'd like to be able to use HCD_BH in order to speed up the dwc2 host
interrupt handler quite a bit.  However, according to the kernel doc for
usb_submit_urb() (specifically the part about "Reserved Bandwidth
Transfers"), we need to keep a reservation active as long as a device
driver keeps submitting.  That was easy to do when we gave back the URB
in the interrupt context: we just looked at when our queue was empty and
released the reserved bandwidth then.  ...but now we need a little more
complexity.

We'll follow EHCI's lead in commit 9118f9eb4f1e ("USB: EHCI: improve
interrupt qh unlink") and add a 5ms delay.  Since we don't have a whole
timer infrastructure in dwc2, we'll just add a timer per QH.  The
overhead for this is very small.

Signed-off-by: Douglas Anderson <dianders@...omium.org>
---
Changes in v2:
- Periodic bandwidth release delay new for V2

 drivers/usb/dwc2/hcd.h       |   6 ++
 drivers/usb/dwc2/hcd_queue.c | 232 +++++++++++++++++++++++++++++++++----------
 2 files changed, 184 insertions(+), 54 deletions(-)

diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h
index 8a4486e1a542..b75a8b116f6e 100644
--- a/drivers/usb/dwc2/hcd.h
+++ b/drivers/usb/dwc2/hcd.h
@@ -211,6 +211,7 @@ enum dwc2_transaction_type {
 /**
  * struct dwc2_qh - Software queue head structure
  *
+ * @hsotg:              The HCD state structure for the DWC OTG controller
  * @ep_type:            Endpoint type. One of the following values:
  *                       - USB_ENDPOINT_XFER_CONTROL
  *                       - USB_ENDPOINT_XFER_BULK
@@ -247,13 +248,16 @@ enum dwc2_transaction_type {
  * @n_bytes:            Xfer Bytes array. Each element corresponds to a transfer
  *                      descriptor and indicates original XferSize value for the
  *                      descriptor
+ * @unreserve_timer:    Timer for releasing periodic reservation.
  * @tt_buffer_dirty     True if clear_tt_buffer_complete is pending
+ * @unreserve_pending:  True if we planned to unreserve but haven't yet.
  *
  * A Queue Head (QH) holds the static characteristics of an endpoint and
  * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
  * be entered in either the non-periodic or periodic schedule.
  */
 struct dwc2_qh {
+	struct dwc2_hsotg *hsotg;
 	u8 ep_type;
 	u8 ep_is_in;
 	u16 maxp;
@@ -275,7 +279,9 @@ struct dwc2_qh {
 	struct dwc2_hcd_dma_desc *desc_list;
 	dma_addr_t desc_list_dma;
 	u32 *n_bytes;
+	struct timer_list unreserve_timer;
 	unsigned tt_buffer_dirty:1;
+	unsigned unreserve_pending:1;
 };
 
 /**
diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c
index 3e1edafc593c..10f27b594e92 100644
--- a/drivers/usb/dwc2/hcd_queue.c
+++ b/drivers/usb/dwc2/hcd_queue.c
@@ -53,6 +53,94 @@
 #include "core.h"
 #include "hcd.h"
 
+/* Wait this long before releasing periodic reservation */
+#define DWC2_UNRESERVE_DELAY (msecs_to_jiffies(5))
+
+/**
+ * dwc2_do_unreserve() - Actually release the periodic reservation
+ *
+ * This function actually releases the periodic bandwidth that was reserved
+ * by the given qh.
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh:    QH for the periodic transfer.
+ */
+static void dwc2_do_unreserve(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+	assert_spin_locked(&hsotg->lock);
+
+	WARN_ON(!qh->unreserve_pending);
+
+	if (WARN_ON(!list_empty(&qh->qh_list_entry)))
+		list_del_init(&qh->qh_list_entry);
+
+	/* Update claimed usecs per (micro)frame */
+	hsotg->periodic_usecs -= qh->usecs;
+
+	if (hsotg->core_params->uframe_sched > 0) {
+		int i;
+
+		for (i = 0; i < 8; i++) {
+			hsotg->frame_usecs[i] += qh->frame_usecs[i];
+			qh->frame_usecs[i] = 0;
+		}
+	} else {
+		/* Release periodic channel reservation */
+		hsotg->periodic_channels--;
+	}
+
+	/* No more unreserve pending--we're did it */
+	qh->unreserve_pending = false;
+}
+
+/**
+ * dwc2_unreserve_timer_fn() - Timer function to release periodic reservation
+ *
+ * According to the kernel doc for usb_submit_urb() (specifically the part about
+ * "Reserved Bandwidth Transfers"), we need to keep a reservation active as
+ * long as a device driver keeps submitting.  Since we're using HCD_BH to give
+ * back the URB we need to give the driver a little bit of time before we
+ * release the reservation.  This worker is called after the appropriate
+ * delay.
+ *
+ * @work: Pointer to a qh unreserve_work.
+ */
+static void dwc2_unreserve_timer_fn(unsigned long data)
+{
+	struct dwc2_qh *qh = (struct dwc2_qh *)data;
+	struct dwc2_hsotg *hsotg = qh->hsotg;
+	unsigned long flags;
+
+	/*
+	 * Wait for the lock, or for us to be scheduled again.  We
+	 * could be scheduled again if:
+	 * - We started executing but didn't get the lock yet.
+	 * - A new reservation came in, but cancel didn't take effect
+	 *   because we already started executing.
+	 * - The timer has been kicked again.
+	 * In that case cancel and wait for the next call.
+	 */
+	while (!spin_trylock_irqsave(&hsotg->lock, flags)) {
+		if (timer_pending(&qh->unreserve_timer))
+			return;
+	}
+
+	/*
+	 * Might be no more unreserve pending if:
+	 * - We started executing but didn't get the lock yet.
+	 * - A new reservation came in, but cancel didn't take effect
+	 *   because we already started executing.
+	 *
+	 * We can't put this in the loop above because unreserve_pending needs
+	 * to be accessed under lock, so we can only check it once we got the
+	 * lock.
+	 */
+	if (qh->unreserve_pending)
+		dwc2_do_unreserve(hsotg, qh);
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
 /**
  * dwc2_qh_init() - Initializes a QH structure
  *
@@ -71,6 +159,9 @@ static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
 	dev_vdbg(hsotg->dev, "%s()\n", __func__);
 
 	/* Initialize QH */
+	qh->hsotg = hsotg;
+	setup_timer(&qh->unreserve_timer, dwc2_unreserve_timer_fn,
+		    (unsigned long)qh);
 	qh->ep_type = dwc2_hcd_get_pipe_type(&urb->pipe_info);
 	qh->ep_is_in = dwc2_hcd_is_pipe_in(&urb->pipe_info) ? 1 : 0;
 
@@ -232,6 +323,15 @@ struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg,
  */
 void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 {
+	/* Make sure any unreserve work is finished. */
+	if (del_timer_sync(&qh->unreserve_timer)) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&hsotg->lock, flags);
+		dwc2_do_unreserve(hsotg, qh);
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+	}
+
 	if (hsotg->core_params->dma_desc_enable > 0)
 		dwc2_hcd_qh_free_ddma(hsotg, qh);
 	kfree(qh);
@@ -469,49 +569,71 @@ static int dwc2_schedule_periodic(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 {
 	int status;
 
-	if (hsotg->core_params->uframe_sched > 0) {
-		int frame = -1;
-
-		status = dwc2_find_uframe(hsotg, qh);
-		if (status == 0)
-			frame = 7;
-		else if (status > 0)
-			frame = status - 1;
-
-		/* Set the new frame up */
-		if (frame >= 0) {
-			qh->sched_frame &= ~0x7;
-			qh->sched_frame |= (frame & 7);
+	status = dwc2_check_max_xfer_size(hsotg, qh);
+	if (status) {
+		dev_dbg(hsotg->dev,
+			"%s: Channel max transfer size too small for periodic transfer\n",
+			__func__);
+		return status;
+	}
+
+	/* Cancel pending unreserve; if canceled OK, unreserve was pending */
+	if (del_timer(&qh->unreserve_timer))
+		WARN_ON(!qh->unreserve_pending);
+
+	/*
+	 * Only need to reserve if there's not an unreserve pending, since if an
+	 * unreserve is pending then by definition our old reservation is still
+	 * valid.  Unreserve might still be pending even if we didn't cancel if
+	 * dwc2_unreserve_timer_fn() already started.  Code in the timer handles
+	 * that case.
+	 */
+	if (!qh->unreserve_pending) {
+		if (hsotg->core_params->uframe_sched > 0) {
+			int frame = -1;
+
+			status = dwc2_find_uframe(hsotg, qh);
+			if (status == 0)
+				frame = 7;
+			else if (status > 0)
+				frame = status - 1;
+
+			/* Set the new frame up */
+			if (frame >= 0) {
+				qh->sched_frame &= ~0x7;
+				qh->sched_frame |= (frame & 7);
+			}
+
+			if (status > 0)
+				status = 0;
+		} else {
+			status = dwc2_periodic_channel_available(hsotg);
+			if (status) {
+				dev_info(hsotg->dev,
+					"%s: No host channel available for periodic transfer\n",
+					__func__);
+				return status;
+			}
+
+			status = dwc2_check_periodic_bandwidth(hsotg, qh);
 		}
 
-		if (status > 0)
-			status = 0;
-	} else {
-		status = dwc2_periodic_channel_available(hsotg);
 		if (status) {
-			dev_info(hsotg->dev,
-				 "%s: No host channel available for periodic transfer\n",
-				 __func__);
+			dev_dbg(hsotg->dev,
+				"%s: Insufficient periodic bandwidth for periodic transfer\n",
+				__func__);
 			return status;
 		}
 
-		status = dwc2_check_periodic_bandwidth(hsotg, qh);
-	}
+		if (hsotg->core_params->uframe_sched <= 0)
+			/* Reserve periodic channel */
+			hsotg->periodic_channels++;
 
-	if (status) {
-		dev_dbg(hsotg->dev,
-			"%s: Insufficient periodic bandwidth for periodic transfer\n",
-			__func__);
-		return status;
+		/* Update claimed usecs per (micro)frame */
+		hsotg->periodic_usecs += qh->usecs;
 	}
 
-	status = dwc2_check_max_xfer_size(hsotg, qh);
-	if (status) {
-		dev_dbg(hsotg->dev,
-			"%s: Channel max transfer size too small for periodic transfer\n",
-			__func__);
-		return status;
-	}
+	qh->unreserve_pending = 0;
 
 	if (hsotg->core_params->dma_desc_enable > 0)
 		/* Don't rely on SOF and start in ready schedule */
@@ -521,13 +643,6 @@ static int dwc2_schedule_periodic(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 		list_add_tail(&qh->qh_list_entry,
 			      &hsotg->periodic_sched_inactive);
 
-	if (hsotg->core_params->uframe_sched <= 0)
-		/* Reserve periodic channel */
-		hsotg->periodic_channels++;
-
-	/* Update claimed usecs per (micro)frame */
-	hsotg->periodic_usecs += qh->usecs;
-
 	return status;
 }
 
@@ -541,22 +656,31 @@ static int dwc2_schedule_periodic(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 static void dwc2_deschedule_periodic(struct dwc2_hsotg *hsotg,
 				     struct dwc2_qh *qh)
 {
-	int i;
+	bool did_modify;
 
-	list_del_init(&qh->qh_list_entry);
+	assert_spin_locked(&hsotg->lock);
 
-	/* Update claimed usecs per (micro)frame */
-	hsotg->periodic_usecs -= qh->usecs;
+	/*
+	 * Schedule the unreserve to happen in a little bit.  Cases here:
+	 * - Unreserve worker might be sitting there waiting to grab the lock.
+	 *   In this case it will notice it's been schedule again and will
+	 *   quit.
+	 * - Unreserve worker might not be scheduled.
+	 *
+	 * We should never already be scheduled since dwc2_schedule_periodic()
+	 * should have canceled the scheduled unreserve timer (hence the
+	 * warning on did_modify).
+	 *
+	 * We add + 1 to the timer to guarantee that at least 1 jiffy has
+	 * passed (otherwise if the jiffy counter might tick right after we
+	 * read it and we'll get no delay).
+	 */
+	did_modify = mod_timer(&qh->unreserve_timer,
+			       jiffies + DWC2_UNRESERVE_DELAY + 1);
+	WARN_ON(did_modify);
+	qh->unreserve_pending = 1;
 
-	if (hsotg->core_params->uframe_sched > 0) {
-		for (i = 0; i < 8; i++) {
-			hsotg->frame_usecs[i] += qh->frame_usecs[i];
-			qh->frame_usecs[i] = 0;
-		}
-	} else {
-		/* Release periodic channel reservation */
-		hsotg->periodic_channels--;
-	}
+	list_del_init(&qh->qh_list_entry);
 }
 
 /**
-- 
2.6.0.rc2.230.g3dd15c0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists