linux-kernel - Re: [PATCH v2] mmc: sdhci-msm: Boost controller core clock

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Mon, 9 Nov 2015 19:09:02 +0200
From:	Georgi Djakov <georgi.djakov@...aro.org>
To:	Bjorn Andersson <bjorn@...o.se>,
	"Ivan T. Ivanov" <ivan.ivanov@...aro.org>,
	Ulf Hansson <ulf.hansson@...aro.org>
Cc:	Stephen Boyd <sboyd@...eaurora.org>,
	Peter Griffin <peter.griffin@...aro.org>,
	linux-mmc <linux-mmc@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	linux-arm-msm <linux-arm-msm@...r.kernel.org>
Subject: Re: [PATCH v2] mmc: sdhci-msm: Boost controller core clock

On 11/06/2015 03:42 AM, Bjorn Andersson wrote:
> On Mon, Jul 6, 2015 at 4:53 AM, Ivan T. Ivanov <ivan.ivanov@...aro.org> wrote:
>> Ensure SDCC is working with maximum clock otherwise card
>> detection could be extremely slow, up to 7 seconds.
>>
>> Signed-off-by: Ivan T. Ivanov <ivan.ivanov@...aro.org>
>> Reviewed-by: Georgi Djakov <georgi.djakov@...aro.org>
>> Acked-by: Stephen Boyd <sboyd@...eaurora.org>
>> ---
>>
>> Changes since v0:
>> - s/falied/failed in warning message.
>>
>>  drivers/mmc/host/sdhci-msm.c | 5 +++++
>>  1 file changed, 5 insertions(+)
>>
>> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
>> index 4a09f76..4bcee03 100644
>> --- a/drivers/mmc/host/sdhci-msm.c
>> +++ b/drivers/mmc/host/sdhci-msm.c
>> @@ -489,6 +489,11 @@ static int sdhci_msm_probe(struct platform_device *pdev)
>>                 goto pclk_disable;
>>         }
>>
>> +       /* Vote for maximum clock rate for maximum performance */
>> +       ret = clk_set_rate(msm_host->clk, INT_MAX);
>> +       if (ret)
>> +               dev_warn(&pdev->dev, "core clock boost failed\n");
>> +
> 
> On my 8974AC devices this results in GCC_SDCC1_APPS_CLK changing from
> 100MHz to 200MHz for my eMMC. Unfortunately this results in the
> following error:
> 
> [    5.103241] mmcblk0: retrying because a re-tune was needed
> [    5.109270] mmcblk0: error -84 transferring data, sector 5816322,
> nr 2, cmd response 0x900, card status 0xc00
> 
> Looking at the board specification it's stated that these card should
> run in DDR50, so I've tried specifying "max-frequency" in the dt. I
> verified in sdhci_set_clock() that we get a divisor of 4, but the
> result is a repetition of:
> 
> [    1.702312] mmc1: Switching to 3.3V signalling voltage failed
> [    1.837987] mmc1: power class selection to bus width 8 ddr 0 failed
> [    1.846227] mmc1: error -110 whilst initialising MMC card
> [    1.946303] mmc1: Reset 0x1 never completed.
> 
> I tried to disable HS200 by specifying SDHCI_QUIRK2_BROKEN_HS200. This
> makes the card come up nicely again.
> 
> 
> Is there any other way to force the link to DDR50? Is it acceptable to
> expose the broken-hs200 quirk in dt so I can use that for now?
> 
> (The downstream fix used for this was apparently to just remove all
> other caps...)
> 

Hi Bjorn,
There are two dev_dbg lines in the driver. What do they print for
major and minor versions?

Thanks,
Georgi

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/