| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5641F04A.9060303@baylibre.com> Date: Tue, 10 Nov 2015 14:25:30 +0100 From: Neil Armstrong <narmstrong@...libre.com> To: netdev@...r.kernel.org Cc: linux-kernel@...r.kernel.org, "David S. Miller" <davem@...emloft.net>, Florian Fainelli <f.fainelli@...il.com>, Andrew Lunn <andrew@...n.ch>, Guenter Roeck <linux@...ck-us.net>, Neil Armstrong <narmstrong@...libre.com>, Vivien Didelot <vivien.didelot@...oirfairelinux.com> Subject: [PATCH 5/6] net: dsa: mv88e6060: add register defines header file To align with the mv88e6xxx code, add a similar header file with all the register defines. The file is based on the mv88e6xxx header for coherency. Signed-off-by: Neil Armstrong <narmstrong@...libre.com> --- drivers/net/dsa/mv88e6060.h | 108 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 108 insertions(+) create mode 100644 drivers/net/dsa/mv88e6060.h diff --git a/drivers/net/dsa/mv88e6060.h b/drivers/net/dsa/mv88e6060.h new file mode 100644 index 0000000..adbc894 --- /dev/null +++ b/drivers/net/dsa/mv88e6060.h @@ -0,0 +1,108 @@ +/* + * net/dsa/mv88e6060.h - Marvell 88e6060 switch chip support + * Copyright (c) 2008 Marvell Semiconductor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __MV88E6060_H +#define __MV88E6060_H + +#define MV88E6060_PORTS 6 + +#define REG_PORT(p) (0x8 + (p)) +#define PORT_STATUS 0x00 +#define PORT_STATUS_PAUSE_EN BIT(15) +#define PORT_STATUS_MY_PAUSE BIT(14) +#define PORT_STATUS_FC (PORT_STATUS_MY_PAUSE | PORT_STATUS_PAUSE_EN) +#define PORT_STATUS_RESOLVED BIT(13) +#define PORT_STATUS_LINK BIT(12) +#define PORT_STATUS_PORTMODE BIT(11) +#define PORT_STATUS_PHYMODE BIT(10) +#define PORT_STATUS_DUPLEX BIT(9) +#define PORT_STATUS_SPEED BIT(8) +#define PORT_SWITCH_ID 0x03 +#define PORT_SWITCH_ID_6060 0x0600 +#define PORT_SWITCH_ID_6060_MASK 0xfff0 +#define PORT_SWITCH_ID_6060_R1 0x0601 +#define PORT_SWITCH_ID_6060_R2 0x0602 +#define PORT_CONTROL 0x04 +#define PORT_CONTROL_FORCE_FLOW_CTRL BIT(15) +#define PORT_CONTROL_TRAILER BIT(14) +#define PORT_CONTROL_HEADER BIT(11) +#define PORT_CONTROL_INGRESS_MODE BIT(8) +#define PORT_CONTROL_VLAN_TUNNEL BIT(7) +#define PORT_CONTROL_STATE_MASK 0x03 +#define PORT_CONTROL_STATE_DISABLED 0x00 +#define PORT_CONTROL_STATE_BLOCKING 0x01 +#define PORT_CONTROL_STATE_LEARNING 0x02 +#define PORT_CONTROL_STATE_FORWARDING 0x03 +#define PORT_VLAN_MAP 0x06 +#define PORT_VLAN_MAP_DBNUM_SHIFT 12 +#define PORT_VLAN_MAP_TABLE_MASK 0x1f +#define PORT_ASSOC_VECTOR 0x0b +#define PORT_ASSOC_VECTOR_MONITOR BIT(15) +#define PORT_ASSOC_VECTOR_PAV_MASK 0x1f +#define PORT_RX_CNTR 0x10 +#define PORT_TX_CNTR 0x11 + +#define REG_GLOBAL 0x0f +#define GLOBAL_STATUS 0x00 +#define GLOBAL_STATUS_SW_MODE_MASK (0x3 << 12) +#define GLOBAL_STATUS_SW_MODE_0 (0x0 << 12) +#define GLOBAL_STATUS_SW_MODE_1 (0x1 << 12) +#define GLOBAL_STATUS_SW_MODE_2 (0x2 << 12) +#define GLOBAL_STATUS_SW_MODE_3 (0x3 << 12) +#define GLOBAL_STATUS_INIT_READY BIT(11) +#define GLOBAL_STATUS_ATU_FULL BIT(3) +#define GLOBAL_STATUS_ATU_DONE BIT(2) +#define GLOBAL_STATUS_PHY_INT BIT(1) +#define GLOBAL_STATUS_EEINT BIT(0) +#define GLOBAL_MAC_01 0x01 +#define GLOBAL_MAC_01_DIFF_ADDR BIT(8) +#define GLOBAL_MAC_23 0x02 +#define GLOBAL_MAC_45 0x03 +#define GLOBAL_CONTROL 0x04 +#define GLOBAL_CONTROL_DISCARD_EXCESS BIT(13) +#define GLOBAL_CONTROL_MAX_FRAME_1536 BIT(10) +#define GLOBAL_CONTROL_RELOAD_EEPROM BIT(9) +#define GLOBAL_CONTROL_CTRMODE BIT(8) +#define GLOBAL_CONTROL_ATU_FULL_EN BIT(3) +#define GLOBAL_CONTROL_ATU_DONE_EN BIT(2) +#define GLOBAL_CONTROL_PHYINT_EN BIT(1) +#define GLOBAL_CONTROL_EEPROM_DONE_EN BIT(0) +#define GLOBAL_ATU_CONTROL 0x0a +#define GLOBAL_ATU_CONTROL_SWRESET BIT(15) +#define GLOBAL_ATU_CONTROL_LEARNDIS BIT(14) +#define GLOBAL_ATU_CONTROL_ATUSIZE_256 (0x0 << 12) +#define GLOBAL_ATU_CONTROL_ATUSIZE_512 (0x1 << 12) +#define GLOBAL_ATU_CONTROL_ATUSIZE_1024 (0x2 << 12) +#define GLOBAL_ATU_CONTROL_ATE_AGE_SHIFT 4 +#define GLOBAL_ATU_CONTROL_ATE_AGE_MASK (0xff << 4) +#define GLOBAL_ATU_CONTROL_ATE_AGE_5MIN (0x13 << 4) +#define GLOBAL_ATU_OP 0x0b +#define GLOBAL_ATU_OP_BUSY BIT(15) +#define GLOBAL_ATU_OP_NOP (0 << 12) +#define GLOBAL_ATU_OP_FLUSH_ALL ((1 << 12) | GLOBAL_ATU_OP_BUSY) +#define GLOBAL_ATU_OP_FLUSH_UNLOCKED ((2 << 12) | GLOBAL_ATU_OP_BUSY) +#define GLOBAL_ATU_OP_LOAD_DB ((3 << 12) | GLOBAL_ATU_OP_BUSY) +#define GLOBAL_ATU_OP_GET_NEXT_DB ((4 << 12) | GLOBAL_ATU_OP_BUSY) +#define GLOBAL_ATU_OP_FLUSH_DB ((5 << 12) | GLOBAL_ATU_OP_BUSY) +#define GLOBAL_ATU_OP_FLUSH_UNLOCKED_DB ((6 << 12) | GLOBAL_ATU_OP_BUSY) +#define GLOBAL_ATU_DATA 0x0c +#define GLOBAL_ATU_DATA_PORT_VECTOR_MASK 0x3f0 +#define GLOBAL_ATU_DATA_PORT_VECTOR_SHIFT 4 +#define GLOBAL_ATU_DATA_STATE_MASK 0x0f +#define GLOBAL_ATU_DATA_STATE_UNUSED 0x00 +#define GLOBAL_ATU_DATA_STATE_UC_STATIC 0x0e +#define GLOBAL_ATU_DATA_STATE_UC_LOCKED 0x0f +#define GLOBAL_ATU_DATA_STATE_MC_STATIC 0x07 +#define GLOBAL_ATU_DATA_STATE_MC_LOCKED 0x0e +#define GLOBAL_ATU_MAC_01 0x0d +#define GLOBAL_ATU_MAC_23 0x0e +#define GLOBAL_ATU_MAC_45 0x0f + +#endif -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists