| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1447198960-2760143-15-git-send-email-arnd@arndb.de>
Date: Wed, 11 Nov 2015 00:42:34 +0100
From: Arnd Bergmann <arnd@...db.de>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Johnny Kim <johnny.kim@...el.com>,
Austin Shin <austin.shin@...el.com>,
Chris Park <chris.park@...el.com>,
Tony Cho <tony.cho@...el.com>, Glen Lee <glen.lee@...el.com>,
Leo Kim <leo.kim@...el.com>, linux-wireless@...r.kernel.org,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
Arnd Bergmann <arnd@...db.de>
Subject: [PATCH 14/20] staging/wilc1000: get rid of WILC_SDIO_IRQ_GPIO
Whether the SDIO function uses an internal or external interrupt
should not be a compiletime decision but be determined at runtime.
This changes the code to pass a GPIO number from the init code
as early as possible, and leaves just one #ifdef WILC_SDIO_IRQ_GPIO
to preserve the previous behavior.
All other locations that check for the interrupt method are turned
into runtime checks based on the gpio number (>=0) or the interrupt
number (>0).
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
drivers/staging/wilc1000/Makefile | 1 -
drivers/staging/wilc1000/linux_wlan.c | 69 ++++++++---------
drivers/staging/wilc1000/linux_wlan_sdio.c | 18 ++---
drivers/staging/wilc1000/linux_wlan_spi.c | 2 +-
drivers/staging/wilc1000/wilc_sdio.c | 105 +++++++++++---------------
drivers/staging/wilc1000/wilc_wfi_netdevice.h | 7 +-
drivers/staging/wilc1000/wilc_wlan.c | 8 +-
7 files changed, 92 insertions(+), 118 deletions(-)
diff --git a/drivers/staging/wilc1000/Makefile b/drivers/staging/wilc1000/Makefile
index 9696f69bda48..fe480c76c521 100644
--- a/drivers/staging/wilc1000/Makefile
+++ b/drivers/staging/wilc1000/Makefile
@@ -1,7 +1,6 @@
obj-$(CONFIG_WILC1000) += wilc1000.o
ccflags-$(CONFIG_WILC1000_SDIO) += -DWILC_SDIO -DCOMPLEMENT_BOOT
-ccflags-$(CONFIG_WILC1000_HW_OOB_INTR) += -DWILC_SDIO_IRQ_GPIO
ccflags-$(CONFIG_WILC1000_SPI) += -DWILC_SPI
ccflags-y += -DSTA_FIRMWARE=\"atmel/wilc1000_fw.bin\" \
diff --git a/drivers/staging/wilc1000/linux_wlan.c b/drivers/staging/wilc1000/linux_wlan.c
index 08c3be8728b2..e81e90678d0f 100644
--- a/drivers/staging/wilc1000/linux_wlan.c
+++ b/drivers/staging/wilc1000/linux_wlan.c
@@ -161,7 +161,6 @@ static int dev_state_ev_handler(struct notifier_block *this, unsigned long event
return NOTIFY_DONE;
}
-#if (defined WILC_SPI) || (defined WILC_SDIO_IRQ_GPIO)
static irqreturn_t isr_uh_routine(int irq, void *user_data)
{
perInterface_wlan_t *nic;
@@ -207,9 +206,9 @@ static int init_irq(struct net_device *dev)
nic = netdev_priv(dev);
wl = nic->wilc;
- if ((gpio_request(GPIO_NUM, "WILC_INTR") == 0) &&
- (gpio_direction_input(GPIO_NUM) == 0)) {
- wl->dev_irq_num = gpio_to_irq(GPIO_NUM);
+ if ((gpio_request(wl->gpio, "WILC_INTR") == 0) &&
+ (gpio_direction_input(wl->gpio) == 0)) {
+ wl->dev_irq_num = gpio_to_irq(wl->gpio);
} else {
ret = -1;
PRINT_ER("could not obtain gpio for WILC_INTR\n");
@@ -220,16 +219,16 @@ static int init_irq(struct net_device *dev)
isr_bh_routine,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
"WILC_IRQ", dev) < 0) {
- PRINT_ER("Failed to request IRQ for GPIO: %d\n", GPIO_NUM);
+ PRINT_ER("Failed to request IRQ for GPIO: %d\n", wl->gpio);
+ gpio_free(wl->gpio);
ret = -1;
} else {
PRINT_D(INIT_DBG, "IRQ request succeeded IRQ-NUM= %d on GPIO: %d\n",
- wl->dev_irq_num, GPIO_NUM);
+ wl->dev_irq_num, wl->gpio);
}
return ret;
}
-#endif
static void deinit_irq(struct net_device *dev)
{
@@ -239,13 +238,11 @@ static void deinit_irq(struct net_device *dev)
nic = netdev_priv(dev);
wilc = nic->wilc;
-#if (defined WILC_SPI) || (defined WILC_SDIO_IRQ_GPIO)
- if (&wilc->dev_irq_num != 0) {
+ /* Deintialize IRQ */
+ if (wilc->dev_irq_num) {
free_irq(wilc->dev_irq_num, wilc);
-
- gpio_free(GPIO_NUM);
+ gpio_free(wilc->gpio);
}
-#endif
}
void linux_wlan_dbg(u8 *buff)
@@ -742,11 +739,11 @@ void wilc1000_wlan_deinit(struct net_device *dev)
#endif
PRINT_D(INIT_DBG, "Disabling IRQ\n");
-#ifdef WILC_SDIO
- mutex_lock(&wl->hif_cs);
- wilc_sdio_disable_interrupt();
- mutex_unlock(&wl->hif_cs);
-#endif
+ if (!wl->dev_irq_num) {
+ mutex_lock(&wl->hif_cs);
+ wilc_sdio_disable_interrupt();
+ mutex_unlock(&wl->hif_cs);
+ }
if (&wl->txq_event)
up(&wl->txq_event);
@@ -760,14 +757,14 @@ void wilc1000_wlan_deinit(struct net_device *dev)
PRINT_D(INIT_DBG, "Deinitializing WILC Wlan\n");
wilc_wlan_cleanup(dev);
-#if (defined WILC_SDIO) && (!defined WILC_SDIO_IRQ_GPIO)
- #if defined(PLAT_ALLWINNER_A20) || defined(PLAT_ALLWINNER_A23) || defined(PLAT_ALLWINNER_A31)
- PRINT_D(INIT_DBG, "Disabling IRQ 2\n");
-
- mutex_lock(&wl->hif_cs);
- wilc_sdio_disable_interrupt();
- mutex_unlock(&wl->hif_cs);
- #endif
+#if defined(PLAT_ALLWINNER_A20) || defined(PLAT_ALLWINNER_A23) || defined(PLAT_ALLWINNER_A31)
+ if (!wl->dev_irq_num) {
+ PRINT_D(INIT_DBG, "Disabling IRQ 2\n");
+
+ mutex_lock(&wl->hif_cs);
+ wilc_sdio_disable_interrupt();
+ mutex_unlock(&wl->hif_cs);
+ }
#endif
PRINT_D(INIT_DBG, "Deinitializing Locks\n");
@@ -887,13 +884,11 @@ int wilc1000_wlan_init(struct net_device *dev, perInterface_wlan_t *p_nic)
goto _fail_locks_;
}
-#if (!defined WILC_SDIO) || (defined WILC_SDIO_IRQ_GPIO)
- if (init_irq(dev)) {
+ if (wl->gpio >= 0 && init_irq(dev)) {
PRINT_ER("couldn't initialize IRQ\n");
ret = -EIO;
goto _fail_locks_;
}
-#endif
ret = wlan_initialize_threads(dev);
if (ret < 0) {
@@ -902,13 +897,11 @@ int wilc1000_wlan_init(struct net_device *dev, perInterface_wlan_t *p_nic)
goto _fail_wilc_wlan_;
}
-#if (defined WILC_SDIO) && (!defined WILC_SDIO_IRQ_GPIO)
- if (wilc_sdio_enable_interrupt()) {
+ if (!wl->dev_irq_num && wilc_sdio_enable_interrupt()) {
PRINT_ER("couldn't initialize IRQ\n");
ret = -EIO;
goto _fail_irq_init_;
}
-#endif
if (wilc_wlan_get_firmware(dev)) {
PRINT_ER("Can't get firmware\n");
@@ -957,14 +950,12 @@ _fail_fw_start_:
wilc_wlan_stop();
_fail_irq_enable_:
-#if (defined WILC_SDIO) && (!defined WILC_SDIO_IRQ_GPIO)
- wilc_sdio_disable_interrupt();
+ if (!wl->dev_irq_num)
+ wilc_sdio_disable_interrupt();
_fail_irq_init_:
-#endif
-#if (!defined WILC_SDIO) || (defined WILC_SDIO_IRQ_GPIO)
- deinit_irq(dev);
+ if (wl->dev_irq_num)
+ deinit_irq(dev);
-#endif
wlan_deinitialize_threads(dev);
_fail_wilc_wlan_:
wilc_wlan_cleanup(dev);
@@ -1417,7 +1408,7 @@ void wilc_netdev_cleanup(struct wilc *wilc)
#endif
}
-int wilc_netdev_init(struct wilc **wilc, struct device *dev, int io_type)
+int wilc_netdev_init(struct wilc **wilc, struct device *dev, int io_type, int gpio)
{
int i;
perInterface_wlan_t *nic;
@@ -1431,6 +1422,8 @@ int wilc_netdev_init(struct wilc **wilc, struct device *dev, int io_type)
*wilc = wilc_dev;
wilc_dev->io_type = io_type;
+ wilc_dev->gpio = gpio;
+
register_inetaddr_notifier(&g_dev_notifier);
for (i = 0; i < NUM_CONCURRENT_IFC; i++) {
diff --git a/drivers/staging/wilc1000/linux_wlan_sdio.c b/drivers/staging/wilc1000/linux_wlan_sdio.c
index 874a859cad21..732b0d66366b 100644
--- a/drivers/staging/wilc1000/linux_wlan_sdio.c
+++ b/drivers/staging/wilc1000/linux_wlan_sdio.c
@@ -6,6 +6,7 @@
#include <linux/mmc/sdio_ids.h>
#include <linux/mmc/sdio.h>
#include <linux/mmc/host.h>
+#include <linux/of_gpio.h>
@@ -34,15 +35,12 @@ static const struct sdio_device_id wilc_sdio_ids[] = {
};
-#ifndef WILC_SDIO_IRQ_GPIO
static void wilc_sdio_interrupt(struct sdio_func *func)
{
sdio_release_host(func);
wilc_handle_isr(sdio_get_drvdata(func));
sdio_claim_host(func);
}
-#endif
-
int wilc_sdio_cmd52(sdio_cmd52_t *cmd)
{
@@ -110,11 +108,18 @@ int wilc_sdio_cmd53(sdio_cmd53_t *cmd)
static int linux_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
{
struct wilc *wilc;
+ int gpio;
+ gpio = -1;
+ if (IS_ENABLED(CONFIG_WILC1000_HW_OOB_INTR)) {
+ gpio = of_get_gpio(func->dev.of_node, 0);
+ if (gpio < 0)
+ gpio = GPIO_NUM;
+ }
PRINT_D(INIT_DBG, "Initializing netdev\n");
wilc_sdio_func = func;
- if (wilc_netdev_init(&wilc, &func->dev, HIF_SDIO)) {
+ if (wilc_netdev_init(&wilc, &func->dev, HIF_SDIO, gpio)) {
PRINT_ER("Couldn't initialize netdev\n");
return -1;
}
@@ -140,7 +145,6 @@ static struct sdio_driver wilc_bus = {
int wilc_sdio_enable_interrupt(void)
{
int ret = 0;
-#ifndef WILC_SDIO_IRQ_GPIO
sdio_claim_host(wilc_sdio_func);
ret = sdio_claim_irq(wilc_sdio_func, wilc_sdio_interrupt);
@@ -150,14 +154,11 @@ int wilc_sdio_enable_interrupt(void)
PRINT_ER("can't claim sdio_irq, err(%d)\n", ret);
ret = -EIO;
}
-#endif
return ret;
}
void wilc_sdio_disable_interrupt(void)
{
-
-#ifndef WILC_SDIO_IRQ_GPIO
int ret;
PRINT_D(INIT_DBG, "wilc_sdio_disable_interrupt IN\n");
@@ -170,7 +171,6 @@ void wilc_sdio_disable_interrupt(void)
sdio_release_host(wilc_sdio_func);
PRINT_D(INIT_DBG, "wilc_sdio_disable_interrupt OUT\n");
-#endif
}
static int linux_sdio_set_speed(int speed)
diff --git a/drivers/staging/wilc1000/linux_wlan_spi.c b/drivers/staging/wilc1000/linux_wlan_spi.c
index a459c502a8a8..f4dda4a6fa7b 100644
--- a/drivers/staging/wilc1000/linux_wlan_spi.c
+++ b/drivers/staging/wilc1000/linux_wlan_spi.c
@@ -404,7 +404,7 @@ static int __init init_wilc_spi_driver(void)
wilc_debugfs_init();
- ret = wilc_netdev_init(&wilc, NULL, HIF_SPI);
+ ret = wilc_netdev_init(&wilc, NULL, HIF_SPI, GPIO_NUM);
if (ret) {
wilc_debugfs_remove();
return ret;
diff --git a/drivers/staging/wilc1000/wilc_sdio.c b/drivers/staging/wilc1000/wilc_sdio.c
index 7fca3b23b485..8441fcccccc4 100644
--- a/drivers/staging/wilc1000/wilc_sdio.c
+++ b/drivers/staging/wilc1000/wilc_sdio.c
@@ -16,6 +16,7 @@
#define WILC_SDIO_BLOCK_SIZE 512
typedef struct {
+ bool irq_gpio;
u32 block_size;
wilc_debug_func dPrint;
int nint;
@@ -25,10 +26,8 @@ typedef struct {
static wilc_sdio_t g_sdio;
-#ifdef WILC_SDIO_IRQ_GPIO
static int sdio_write_reg(u32 addr, u32 data);
static int sdio_read_reg(u32 addr, u32 *data);
-#endif
/********************************************
*
@@ -131,29 +130,29 @@ _fail_:
static int sdio_clear_int(void)
{
-#ifndef WILC_SDIO_IRQ_GPIO
- /* u32 sts; */
- sdio_cmd52_t cmd;
+ if (!g_sdio.irq_gpio) {
+ /* u32 sts; */
+ sdio_cmd52_t cmd;
- cmd.read_write = 0;
- cmd.function = 1;
- cmd.raw = 0;
- cmd.address = 0x4;
- cmd.data = 0;
- wilc_sdio_cmd52(&cmd);
+ cmd.read_write = 0;
+ cmd.function = 1;
+ cmd.raw = 0;
+ cmd.address = 0x4;
+ cmd.data = 0;
+ wilc_sdio_cmd52(&cmd);
- return cmd.data;
-#else
- u32 reg;
+ return cmd.data;
+ } else {
+ u32 reg;
- if (!sdio_read_reg(WILC_HOST_RX_CTRL_0, ®)) {
- g_sdio.dPrint(N_ERR, "[wilc spi]: Failed read reg (%08x)...\n", WILC_HOST_RX_CTRL_0);
- return 0;
+ if (!sdio_read_reg(WILC_HOST_RX_CTRL_0, ®)) {
+ g_sdio.dPrint(N_ERR, "[wilc spi]: Failed read reg (%08x)...\n", WILC_HOST_RX_CTRL_0);
+ return 0;
+ }
+ reg &= ~0x1;
+ sdio_write_reg(WILC_HOST_RX_CTRL_0, reg);
+ return 1;
}
- reg &= ~0x1;
- sdio_write_reg(WILC_HOST_RX_CTRL_0, reg);
- return 1;
-#endif
}
@@ -455,8 +454,7 @@ static int sdio_sync(void)
return 0;
}
-#ifdef WILC_SDIO_IRQ_GPIO
- {
+ if (g_sdio.irq_gpio) {
u32 reg;
int ret;
@@ -490,7 +488,6 @@ static int sdio_sync(void)
return 0;
}
}
-#endif
return 1;
}
@@ -504,6 +501,7 @@ static int sdio_init(struct wilc *wilc, wilc_debug_func func)
memset(&g_sdio, 0, sizeof(wilc_sdio_t));
g_sdio.dPrint = func;
+ g_sdio.irq_gpio = (wilc->dev_irq_num);
if (!wilc_sdio_init()) {
g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed io init bus...\n");
@@ -662,36 +660,33 @@ static int sdio_read_int(u32 *int_status)
/**
* Read IRQ flags
**/
-#ifndef WILC_SDIO_IRQ_GPIO
- cmd.function = 1;
- cmd.address = 0x04;
- cmd.data = 0;
- wilc_sdio_cmd52(&cmd);
-
- if (cmd.data & BIT(0))
- tmp |= INT_0;
- if (cmd.data & BIT(2))
- tmp |= INT_1;
- if (cmd.data & BIT(3))
- tmp |= INT_2;
- if (cmd.data & BIT(4))
- tmp |= INT_3;
- if (cmd.data & BIT(5))
- tmp |= INT_4;
- if (cmd.data & BIT(6))
- tmp |= INT_5;
- {
+ if (!g_sdio.irq_gpio) {
int i;
+ cmd.function = 1;
+ cmd.address = 0x04;
+ cmd.data = 0;
+ wilc_sdio_cmd52(&cmd);
+
+ if (cmd.data & BIT(0))
+ tmp |= INT_0;
+ if (cmd.data & BIT(2))
+ tmp |= INT_1;
+ if (cmd.data & BIT(3))
+ tmp |= INT_2;
+ if (cmd.data & BIT(4))
+ tmp |= INT_3;
+ if (cmd.data & BIT(5))
+ tmp |= INT_4;
+ if (cmd.data & BIT(6))
+ tmp |= INT_5;
for (i = g_sdio.nint; i < MAX_NUM_INT; i++) {
if ((tmp >> (IRG_FLAGS_OFFSET + i)) & 0x1) {
g_sdio.dPrint(N_ERR, "[wilc sdio]: Unexpected interrupt (1) : tmp=%x, data=%x\n", tmp, cmd.data);
break;
}
}
- }
-#else
- {
+ } else {
u32 irq_flags;
cmd.read_write = 0;
@@ -704,8 +699,6 @@ static int sdio_read_int(u32 *int_status)
tmp |= ((irq_flags >> 0) << IRG_FLAGS_OFFSET);
}
-#endif
-
*int_status = tmp;
return 1;
@@ -718,16 +711,14 @@ static int sdio_clear_int_ext(u32 val)
if (g_sdio.has_thrpt_enh3) {
u32 reg;
-#ifdef WILC_SDIO_IRQ_GPIO
- {
+ if (g_sdio.irq_gpio) {
u32 flags;
flags = val & (BIT(MAX_NUN_INT_THRPT_ENH2) - 1);
reg = flags;
+ } else {
+ reg = 0;
}
-#else
- reg = 0;
-#endif
/* select VMM table 0 */
if ((val & SEL_VMM_TBL0) == SEL_VMM_TBL0)
reg |= BIT(5);
@@ -754,8 +745,7 @@ static int sdio_clear_int_ext(u32 val)
}
} else {
-#ifdef WILC_SDIO_IRQ_GPIO
- {
+ if (g_sdio.irq_gpio) {
/* see below. has_thrpt_enh2 uses register 0xf8 to clear interrupts. */
/* Cannot clear multiple interrupts. Must clear each interrupt individually */
u32 flags;
@@ -795,7 +785,6 @@ static int sdio_clear_int_ext(u32 val)
}
}
}
-#endif /* WILC_SDIO_IRQ_GPIO */
{
u32 vmm_ctl;
@@ -862,8 +851,7 @@ static int sdio_sync_ext(int nint /* how mant interrupts to enable. */)
return 0;
}
-#ifdef WILC_SDIO_IRQ_GPIO
- {
+ if (g_sdio.irq_gpio) {
u32 reg;
int ret, i;
@@ -915,7 +903,6 @@ static int sdio_sync_ext(int nint /* how mant interrupts to enable. */)
}
}
}
-#endif /* WILC_SDIO_IRQ_GPIO */
return 1;
}
diff --git a/drivers/staging/wilc1000/wilc_wfi_netdevice.h b/drivers/staging/wilc1000/wilc_wfi_netdevice.h
index eae9ce175351..92f4cb71608d 100644
--- a/drivers/staging/wilc1000/wilc_wfi_netdevice.h
+++ b/drivers/staging/wilc1000/wilc_wfi_netdevice.h
@@ -158,10 +158,9 @@ struct wilc_vif {
struct wilc {
int io_type;
int mac_status;
+ int gpio;
bool initialized;
- #if (!defined WILC_SDIO) || (defined WILC_SDIO_IRQ_GPIO)
- unsigned short dev_irq_num;
- #endif
+ int dev_irq_num;
int close;
u8 vif_num;
struct wilc_vif vif[NUM_CONCURRENT_IFC];
@@ -213,7 +212,7 @@ void linux_wlan_rx_complete(void);
void linux_wlan_dbg(u8 *buff);
int linux_wlan_lock_timeout(void *vp, u32 timeout);
void wilc_netdev_cleanup(struct wilc *wilc);
-int wilc_netdev_init(struct wilc **wilc, struct device *, int io_type);
+int wilc_netdev_init(struct wilc **wilc, struct device *, int io_type, int gpio);
void wilc1000_wlan_deinit(struct net_device *dev);
void WILC_WFI_mgmt_rx(struct wilc *wilc, u8 *buff, u32 size);
u16 wilc_set_machw_change_vir_if(struct net_device *dev, bool value);
diff --git a/drivers/staging/wilc1000/wilc_wlan.c b/drivers/staging/wilc1000/wilc_wlan.c
index 2958689a13c6..3d53550149fb 100644
--- a/drivers/staging/wilc1000/wilc_wlan.c
+++ b/drivers/staging/wilc1000/wilc_wlan.c
@@ -1174,9 +1174,6 @@ void wilc_handle_isr(void *wilc)
wilc_sleeptimer_isr_ext(int_status);
if (!(int_status & (ALL_INT_EXT))) {
-#ifdef WILC_SDIO
- PRINT_D(TX_DBG, ">> UNKNOWN_INTERRUPT - 0x%08x\n", int_status);
-#endif
wilc_unknown_isr_ext();
}
release_bus(RELEASE_ALLOW_SLEEP);
@@ -1267,9 +1264,8 @@ int wilc_wlan_start(void)
return ret;
}
reg = 0;
-#ifdef WILC_SDIO_IRQ_GPIO
- reg |= WILC_HAVE_SDIO_IRQ_GPIO;
-#endif
+ if (p->io_type == HIF_SDIO && wilc_dev->dev_irq_num)
+ reg |= WILC_HAVE_SDIO_IRQ_GPIO;
#ifdef WILC_DISABLE_PMU
#else
--
2.1.0.rc2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists