Message-Id: <1447470235-13643-2-git-send-email-somlo@cmu.edu>
Date:	Fri, 13 Nov 2015 22:03:52 -0500
From:	"Gabriel L. Somlo" <somlo@....edu>
To:	gregkh@...uxfoundation.org, robh+dt@...nel.org, pawel.moll@....com,
	mark.rutland@....com, ijc+devicetree@...lion.org.uk,
	galak@...eaurora.org, arnd@...db.de, lersek@...hat.com,
	ralf@...ux-mips.org, rmk+kernel@....linux.org.uk, eric@...olt.net,
	hanjun.guo@...aro.org, zajec5@...il.com, sudeep.holla@....com,
	agross@...eaurora.org, linux-api@...r.kernel.org,
	linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Cc:	kernelnewbies@...nelnewbies.org, qemu-devel@...gnu.org,
	matt.fleming@...el.com, jordan.l.justen@...el.com, mst@...hat.com,
	peter.maydell@...aro.org, leif.lindholm@...aro.org,
	ard.biesheuvel@...aro.org, pbonzini@...hat.com, kraxel@...hat.com,
	luto@...capital.net, stefanha@...il.com
Subject: [PATCH v4 1/4] firmware: introduce sysfs driver for QEMU's fw_cfg device

From: Gabriel Somlo <somlo@....edu>

Make fw_cfg entries of type "file" available via sysfs. Entries
are listed under /sys/firmware/qemu_fw_cfg/by_key, in folders
named after each entry's selector key. Filename, selector value,
and size read-only attributes are included for each entry. Also,
a "raw" attribute allows retrieval of the full binary content of
each entry.

This patch also provides a documentation file outlining the
guest-side "hardware" interface exposed by the QEMU fw_cfg device.

The fw_cfg device can be instantiated automatically from ACPI or
the Device Tree, or manually by using a kernel module (or command
line) parameter, with a syntax outlined in the documentation file.

Signed-off-by: Gabriel Somlo <somlo@....edu>
---
 .../ABI/testing/sysfs-firmware-qemu_fw_cfg         | 198 +++++++
 drivers/firmware/Kconfig                           |  19 +
 drivers/firmware/Makefile                          |   1 +
 drivers/firmware/qemu_fw_cfg.c                     | 611 +++++++++++++++++++++
 4 files changed, 829 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg
 create mode 100644 drivers/firmware/qemu_fw_cfg.c

diff --git a/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg b/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg
new file mode 100644
index 0000000..b908b6d
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg
@@ -0,0 +1,198 @@
+What:		/sys/firmware/qemu_fw_cfg/
+Date:		August 2015
+Contact:	Gabriel Somlo <somlo@....edu>
+Description:
+		Several different architectures supported by QEMU (x86, arm,
+		sun4*, ppc/mac) are provisioned with a firmware configuration
+		(fw_cfg) device, originally intended as a way for the host to
+		provide configuration data to the guest firmware. Starting
+		with QEMU v2.4, arbitrary fw_cfg file entries may be specified
+		by the user on the command line, which makes fw_cfg additionally
+		useful as an out-of-band, asynchronous mechanism for providing
+		configuration data to the guest userspace.
+
+		=== Guest-side Hardware Interface ===
+
+		The fw_cfg device is available to guest VMs as a register pair
+		(control and data), accessible as either a IO ports or as MMIO
+		addresses, depending on the architecture.
+
+		--- Control Register ---
+
+		Width: 16-bit
+		Access: Write-Only
+		Endianness: LE (if IOport) or BE (if MMIO)
+
+		A write to the control register selects the index for one of
+		the firmware configuration items (or "blobs") available on the
+		fw_cfg device, which can subsequently be read from the data
+		register.
+
+		Each time the control register is written, an data offset
+		internal to the fw_cfg device will be set to zero. This data
+		offset impacts which portion of the selected fw_cfg blob is
+		accessed by reading the data register, as explained below.
+
+		--- Data Register ---
+
+		Width: 8-bit (if IOport), or 8/16/32/64-bit (if MMIO)
+		Access: Read-Only
+		Endianness: string preserving
+
+		The data register allows access to an array of bytes which
+		represent the fw_cfg blob last selected by a write to the
+		control register.
+
+		Immediately following a write to the control register, the data
+		offset will be set to zero. Each successful read access to the
+		data register will increment the data offset by the appropriate
+		access width.
+
+		Each fw_cfg blob has a maximum associated data length. Once the
+		data offset exceeds this maximum length, any subsequent reads
+		via the data register will return 0x00.
+
+		An N-byte wide read of the data register will return the next
+		available N bytes of the selected fw_cfg blob, as a substring,
+		in increasing address order, similar to memcpy(), zero-padded
+		if necessary should the maximum data length of the selected
+		item be reached, as described above.
+
+		--- Per-arch Register Details ---
+
+		-------------------------------------------------------------
+		arch	access	       base	ctrl	ctrl	data	max.
+			mode	    address	offset	endian	offset	data
+						(bytes)			(bytes)
+		-------------------------------------------------------------
+		x86	IOport	      0x510	0	LE	1	1
+		arm	MMIO	  0x9020000	8	BE	0	8
+		sun4u	IOport	      0x510	0	LE	1	1
+		sun4m	MMIO	0xd00000510	0	BE	2	1
+		ppc/mac	MMIO	 0xf0000510	0	BE	2	1
+		-------------------------------------------------------------
+
+		NOTE 1. On platforms where the fw_cfg registers are exposed as
+		IO ports, the data port number will always be one greater than
+		the port number of the control register. I.e., the two ports
+		are overlapping, and can not be mapped separately.
+
+		NOTE 2. QEMU publishes the base and size of the register set
+		in ACPI (as _HID "QEMU0002", on x86 and select aarch64 subsets)
+		and in the Device Tree (as compatible = "qemu,fw-cfg-mmio", on
+		arm guests).
+
+		NOTE 3. On architectures where automatic detection of fw_cfg
+		"hardware" (via ACPI or DT) is not supported, the guest side
+		kernel driver allows configuration using a command line
+		parameter, with the following syntax:
+
+			[fw_cfg.]ioport=<size>@<base>[:<ctrl_off>:<data_off>]
+		or
+			[fw_cfg.]mmio=<size>@<base>[:<ctrl_off>:<data_off>]
+
+		where:
+			<size> : size of ioport or mmio range
+			<base> : physical base address of ioport or mmio range
+		and, optionally:
+			<ctrl_off> : offset of control register
+			<data_off> : offset of data register
+
+		Since neither ACPI nor DT provide specific details on register
+		offsets within the overall specified register set range, using
+		<ctrl_off> and <data_off> allows the arm-specific default MMIO
+		offset values (8 and 0, respectively) to be overridden for e.g.
+		sun4m and ppc/mac, where the ofsets should be 0 and 2,
+		respectively. Using ppc/mac as an example:
+
+			fw_cfg.mmio=3@...0000510:0:2
+
+		=== Firmware Configuration Items of Interest ===
+
+		Originally, the index key, size, and formatting of blobs in
+		fw_cfg was hard coded by mutual agreement between QEMU on the
+		host side, and the guest-side firmware. Later on, a file
+		transfer interface was added: by reading a special blob, the
+		fw_cfg consumer can retrieve a list of records containing the
+		name, selector key, and size of further fw_cfg blobs made
+		available by the host. Below we describe three fw_cfg blobs
+		of interest to the sysfs driver.
+
+		--- Signature (Key 0x0000, FW_CFG_SIGNATURE) ---
+
+		The presence of the fw_cfg device can be verified by selecting
+		the signature blob by writing 0x0000 to the control register,
+		and reading four bytes from the data register. If the fw_cfg
+		device is present, the four bytes read will match the ASCII
+		characters "QEMU".
+
+		--- Revision (Key 0x0001, FW_CFG_ID) ---
+
+		A 32-bit little-endian unsigned integer, this item is used as
+		an interface revision number.
+
+		--- File Directory (Key 0x0019, FW_CFG_FILE_DIR) ---
+
+		Any fw_cfg blobs stored at key 0x0020 FW_CFG_FILE_FIRST() or
+		higher will have an associated entry in this "directory" blob,
+		which facilitates the discovery of available items by software
+		(e.g. BIOS) running on the guest. The format of the directory
+		blob is shown below.
+
+		NOTE: All integers are stored in big-endian format!
+
+		/* the entire file directory "blob" */
+		struct FWCfgFiles {
+			u32 count;		/* total number of entries */
+			struct FWCfgFile f[];	/* entry array, see below */
+		};
+
+		/* an individual directory entry, 64 bytes total */
+		struct FWCfgFile {
+			u32 size;	/* size of referenced blob */
+			u16 select;	/* selector key for referenced blob */
+			u16 reserved;
+			char name[56];	/* blob name, nul-terminated ASCII */
+		};
+
+		=== SysFS fw_cfg Interface ===
+
+		The fw_cfg sysfs interface described in this document is only
+		intended to display discoverable blobs (i.e., those registered
+		with the file directory), as there is no way to determine the
+		presence or size of "legacy" blobs (with selector keys between
+		0x0002 and 0x0018) programmatically.
+
+		All fw_cfg information is shown under:
+
+			/sys/firmware/qemu_fw_cfg/
+
+		The only legacy blob displayed is the fw_cfg device revision:
+
+			/sys/firmware/qemu_fw_cfg/rev
+
+		--- Discoverable fw_cfg blobs by selector key ---
+
+		All discoverable blobs listed in the fw_cfg file directory are
+		displayed as entries named after their unique selector key
+		value, e.g.:
+
+			/sys/firmware/qemu_fw_cfg/by_key/32
+			/sys/firmware/qemu_fw_cfg/by_key/33
+			/sys/firmware/qemu_fw_cfg/by_key/34
+			...
+
+		Each such fw_cfg sysfs entry has the following values exported
+		as attributes:
+
+		name  	: The 56-byte nul-terminated ASCII string used as the
+			  blob's 'file name' in the fw_cfg directory.
+		size  	: The length of the blob, as given in the fw_cfg
+			  directory.
+		key	: The value of the blob's selector key as given in the
+			  fw_cfg directory. This value is the same as used in
+			  the parent directory name.
+		raw	: The raw bytes of the blob, obtained by selecting the
+			  entry via the control register, and reading a number
+			  of bytes equal to the blob size from the data
+			  register.
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index cf478fe..3cf920a 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -161,6 +161,25 @@ config RASPBERRYPI_FIRMWARE
 	  This option enables support for communicating with the firmware on the
 	  Raspberry Pi.
 
+config FW_CFG_SYSFS
+	tristate "QEMU fw_cfg device support in sysfs"
+	depends on SYSFS
+	default n
+	help
+	  Say Y or M here to enable the exporting of the QEMU firmware
+	  configuration (fw_cfg) file entries via sysfs. Entries are
+	  found under /sys/firmware/fw_cfg when this option is enabled
+	  and loaded.
+
+config FW_CFG_SYSFS_CMDLINE
+	bool "QEMU fw_cfg device parameter parsing"
+	depends on FW_CFG_SYSFS
+	help
+	  Allow the qemu_fw_cfg device to be initialized via the kernel
+	  command line or using a module parameter.
+	  WARNING: Using incorrect parameters (base address in particular)
+	  may crash your system.
+
 config QCOM_SCM
 	bool
 	depends on ARM || ARM64
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 48dd417..474bada 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_ISCSI_IBFT_FIND)	+= iscsi_ibft_find.o
 obj-$(CONFIG_ISCSI_IBFT)	+= iscsi_ibft.o
 obj-$(CONFIG_FIRMWARE_MEMMAP)	+= memmap.o
 obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o
+obj-$(CONFIG_FW_CFG_SYSFS)	+= qemu_fw_cfg.o
 obj-$(CONFIG_QCOM_SCM)		+= qcom_scm.o
 obj-$(CONFIG_QCOM_SCM_64)	+= qcom_scm-64.o
 obj-$(CONFIG_QCOM_SCM_32)	+= qcom_scm-32.o
diff --git a/drivers/firmware/qemu_fw_cfg.c b/drivers/firmware/qemu_fw_cfg.c
new file mode 100644
index 0000000..618304a
--- /dev/null
+++ b/drivers/firmware/qemu_fw_cfg.c
@@ -0,0 +1,611 @@
+/*
+ * drivers/firmware/qemu_fw_cfg.c
+ *
+ * Copyright 2015 Carnegie Mellon University
+ *
+ * Expose entries from QEMU's firmware configuration (fw_cfg) device in
+ * sysfs (read-only, under "/sys/firmware/qemu_fw_cfg/...").
+ *
+ * The fw_cfg device may be instantiated via either an ACPI node (on x86
+ * and select subsets of aarch64), a Device Tree node (on arm), or using
+ * a kernel module (or command line) parameter with the following syntax:
+ *
+ *      [fw_cfg.]ioport=<size>@<base>[:<ctrl_off>:<data_off>]
+ * or
+ *      [fw_cfg.]mmio=<size>@<base>[:<ctrl_off>:<data_off>]
+ *
+ * where:
+ *      <size>     := size of ioport or mmio range
+ *      <base>     := physical base address of ioport or mmio range
+ *      <ctrl_off> := (optional) offset of control register
+ *      <data_off> := (optional) offset of data register
+ *
+ * e.g.:
+ *      fw_cfg.ioport=2@...10:0:1		(the default on x86)
+ * or
+ *      fw_cfg.mmio=0xA@...020000:8:0		(the default on arm)
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/acpi.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+
+MODULE_AUTHOR("Gabriel L. Somlo <somlo@....edu>");
+MODULE_DESCRIPTION("QEMU fw_cfg sysfs support");
+MODULE_LICENSE("GPL");
+
+/* selector key values for "well-known" fw_cfg entries */
+#define FW_CFG_SIGNATURE  0x00
+#define FW_CFG_ID         0x01
+#define FW_CFG_FILE_DIR   0x19
+
+/* size in bytes of fw_cfg signature */
+#define FW_CFG_SIG_SIZE 4
+
+/* fw_cfg "file name" is up to 56 characters (including terminating nul) */
+#define FW_CFG_MAX_FILE_PATH 56
+
+/* fw_cfg file directory entry type */
+struct fw_cfg_file {
+	u32 size;
+	u16 select;
+	u16 reserved;
+	char name[FW_CFG_MAX_FILE_PATH];
+};
+
+/* fw_cfg device i/o register addresses */
+static bool fw_cfg_is_mmio;
+static phys_addr_t fw_cfg_p_base;
+static resource_size_t fw_cfg_p_size;
+static void __iomem *fw_cfg_dev_base;
+static void __iomem *fw_cfg_reg_ctrl;
+static void __iomem *fw_cfg_reg_data;
+
+/* atomic access to fw_cfg device (potentially slow i/o, so using mutex) */
+static DEFINE_MUTEX(fw_cfg_dev_lock);
+
+/* pick appropriate endianness for selector key */
+static inline u16 fw_cfg_sel_endianness(u16 key)
+{
+	return fw_cfg_is_mmio ? cpu_to_be16(key) : cpu_to_le16(key);
+}
+
+/* read chunk of given fw_cfg blob (caller responsible for sanity-check) */
+static inline void fw_cfg_read_blob(u16 key,
+				    void *buf, loff_t pos, size_t count)
+{
+	mutex_lock(&fw_cfg_dev_lock);
+	iowrite16(fw_cfg_sel_endianness(key), fw_cfg_reg_ctrl);
+	while (pos-- > 0)
+		ioread8(fw_cfg_reg_data);
+	ioread8_rep(fw_cfg_reg_data, buf, count);
+	mutex_unlock(&fw_cfg_dev_lock);
+}
+
+/* clean up fw_cfg device i/o */
+static void fw_cfg_io_cleanup(void)
+{
+	if (fw_cfg_is_mmio) {
+		iounmap(fw_cfg_dev_base);
+		release_mem_region(fw_cfg_p_base, fw_cfg_p_size);
+	} else {
+		ioport_unmap(fw_cfg_dev_base);
+		release_region(fw_cfg_p_base, fw_cfg_p_size);
+	}
+}
+
+/* initialize fw_cfg device i/o from platform data */
+static int fw_cfg_do_platform_probe(struct platform_device *pdev)
+{
+	char sig[FW_CFG_SIG_SIZE];
+	struct resource *range, *ctrl, *data;
+
+	/* acquire i/o range details */
+	fw_cfg_is_mmio = false;
+	range = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!range) {
+		fw_cfg_is_mmio = true;
+		range = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (!range)
+			return -EINVAL;
+	}
+	fw_cfg_p_base = range->start;
+	fw_cfg_p_size = resource_size(range);
+
+	if (fw_cfg_is_mmio) {
+		if (!request_mem_region(fw_cfg_p_base,
+					fw_cfg_p_size, "fw_cfg_mem"))
+			return -EBUSY;
+		fw_cfg_dev_base = ioremap(fw_cfg_p_base, fw_cfg_p_size);
+		if (!fw_cfg_dev_base) {
+			release_mem_region(fw_cfg_p_base, fw_cfg_p_size);
+			return -EFAULT;
+		}
+		/* set register addresses (using arm/mmio offsets) */
+		fw_cfg_reg_ctrl = fw_cfg_dev_base + 0x08;
+		fw_cfg_reg_data = fw_cfg_dev_base + 0x00;
+	} else {
+		if (!request_region(fw_cfg_p_base,
+				    fw_cfg_p_size, "fw_cfg_io"))
+			return -EBUSY;
+		fw_cfg_dev_base = ioport_map(fw_cfg_p_base, fw_cfg_p_size);
+		if (!fw_cfg_dev_base) {
+			release_region(fw_cfg_p_base, fw_cfg_p_size);
+			return -EFAULT;
+		}
+		/* set register addresses (using pc/i386/ioport offsets) */
+		fw_cfg_reg_ctrl = fw_cfg_dev_base + 0x00;
+		fw_cfg_reg_data = fw_cfg_dev_base + 0x01;
+	}
+
+	/* were custom register offsets provided (e.g. on the command line)? */
+	ctrl = platform_get_resource_byname(pdev, IORESOURCE_REG, "ctrl");
+	data = platform_get_resource_byname(pdev, IORESOURCE_REG, "data");
+	if (ctrl && data) {
+		fw_cfg_reg_ctrl = fw_cfg_dev_base + ctrl->start;
+		fw_cfg_reg_data = fw_cfg_dev_base + data->start;
+	}
+
+	/* verify fw_cfg device signature */
+	fw_cfg_read_blob(FW_CFG_SIGNATURE, sig, 0, FW_CFG_SIG_SIZE);
+	if (memcmp(sig, "QEMU", FW_CFG_SIG_SIZE) != 0) {
+		fw_cfg_io_cleanup();
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+/* fw_cfg revision attribute, in /sys/firmware/qemu_fw_cfg top-level dir. */
+static u32 fw_cfg_rev;
+
+static ssize_t fw_cfg_showrev(struct kobject *k, struct attribute *a, char *buf)
+{
+	return sprintf(buf, "%u\n", fw_cfg_rev);
+}
+
+static const struct {
+	struct attribute attr;
+	ssize_t (*show)(struct kobject *k, struct attribute *a, char *buf);
+} fw_cfg_rev_attr = {
+	.attr = { .name = "rev", .mode = S_IRUSR },
+	.show = fw_cfg_showrev,
+};
+
+/* fw_cfg_sysfs_entry type */
+struct fw_cfg_sysfs_entry {
+	struct kobject kobj;
+	struct fw_cfg_file f;
+	struct list_head list;
+};
+
+/* get fw_cfg_sysfs_entry from kobject member */
+static inline struct fw_cfg_sysfs_entry *to_entry(struct kobject *kobj)
+{
+	return container_of(kobj, struct fw_cfg_sysfs_entry, kobj);
+}
+
+/* fw_cfg_sysfs_attribute type */
+struct fw_cfg_sysfs_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct fw_cfg_sysfs_entry *entry, char *buf);
+};
+
+/* get fw_cfg_sysfs_attribute from attribute member */
+static inline struct fw_cfg_sysfs_attribute *to_attr(struct attribute *attr)
+{
+	return container_of(attr, struct fw_cfg_sysfs_attribute, attr);
+}
+
+/* global cache of fw_cfg_sysfs_entry objects */
+static LIST_HEAD(fw_cfg_entry_cache);
+
+/* kobjects removed lazily by kernel, mutual exclusion needed */
+static DEFINE_SPINLOCK(fw_cfg_cache_lock);
+
+static inline void fw_cfg_sysfs_cache_enlist(struct fw_cfg_sysfs_entry *entry)
+{
+	spin_lock(&fw_cfg_cache_lock);
+	list_add_tail(&entry->list, &fw_cfg_entry_cache);
+	spin_unlock(&fw_cfg_cache_lock);
+}
+
+static inline void fw_cfg_sysfs_cache_delist(struct fw_cfg_sysfs_entry *entry)
+{
+	spin_lock(&fw_cfg_cache_lock);
+	list_del(&entry->list);
+	spin_unlock(&fw_cfg_cache_lock);
+}
+
+static void fw_cfg_sysfs_cache_cleanup(void)
+{
+	struct fw_cfg_sysfs_entry *entry, *next;
+
+	list_for_each_entry_safe(entry, next, &fw_cfg_entry_cache, list) {
+		/* will end up invoking fw_cfg_sysfs_cache_delist()
+		 * via each object's release() method (i.e. destructor)
+		 */
+		kobject_put(&entry->kobj);
+	}
+}
+
+/* default_attrs: per-entry attributes and show methods */
+
+#define FW_CFG_SYSFS_ATTR(_attr) \
+struct fw_cfg_sysfs_attribute fw_cfg_sysfs_attr_##_attr = { \
+	.attr = { .name = __stringify(_attr), .mode = S_IRUSR }, \
+	.show = fw_cfg_sysfs_show_##_attr, \
+}
+
+static ssize_t fw_cfg_sysfs_show_size(struct fw_cfg_sysfs_entry *e, char *buf)
+{
+	return sprintf(buf, "%u\n", e->f.size);
+}
+
+static ssize_t fw_cfg_sysfs_show_key(struct fw_cfg_sysfs_entry *e, char *buf)
+{
+	return sprintf(buf, "%u\n", e->f.select);
+}
+
+static ssize_t fw_cfg_sysfs_show_name(struct fw_cfg_sysfs_entry *e, char *buf)
+{
+	return sprintf(buf, "%s\n", e->f.name);
+}
+
+static FW_CFG_SYSFS_ATTR(size);
+static FW_CFG_SYSFS_ATTR(key);
+static FW_CFG_SYSFS_ATTR(name);
+
+static struct attribute *fw_cfg_sysfs_entry_attrs[] = {
+	&fw_cfg_sysfs_attr_size.attr,
+	&fw_cfg_sysfs_attr_key.attr,
+	&fw_cfg_sysfs_attr_name.attr,
+	NULL,
+};
+
+/* sysfs_ops: find fw_cfg_[entry, attribute] and call appropriate show method */
+static ssize_t fw_cfg_sysfs_attr_show(struct kobject *kobj, struct attribute *a,
+				      char *buf)
+{
+	struct fw_cfg_sysfs_entry *entry = to_entry(kobj);
+	struct fw_cfg_sysfs_attribute *attr = to_attr(a);
+
+	return attr->show(entry, buf);
+}
+
+static const struct sysfs_ops fw_cfg_sysfs_attr_ops = {
+	.show = fw_cfg_sysfs_attr_show,
+};
+
+/* release: destructor, to be called via kobject_put() */
+static void fw_cfg_sysfs_release_entry(struct kobject *kobj)
+{
+	struct fw_cfg_sysfs_entry *entry = to_entry(kobj);
+
+	fw_cfg_sysfs_cache_delist(entry);
+	kfree(entry);
+}
+
+/* kobj_type: ties together all properties required to register an entry */
+static struct kobj_type fw_cfg_sysfs_entry_ktype = {
+	.default_attrs = fw_cfg_sysfs_entry_attrs,
+	.sysfs_ops = &fw_cfg_sysfs_attr_ops,
+	.release = fw_cfg_sysfs_release_entry,
+};
+
+/* raw-read method and attribute */
+static ssize_t fw_cfg_sysfs_read_raw(struct file *filp, struct kobject *kobj,
+				     struct bin_attribute *bin_attr,
+				     char *buf, loff_t pos, size_t count)
+{
+	struct fw_cfg_sysfs_entry *entry = to_entry(kobj);
+
+	if (pos > entry->f.size)
+		return -EINVAL;
+
+	if (count > entry->f.size - pos)
+		count = entry->f.size - pos;
+
+	fw_cfg_read_blob(entry->f.select, buf, pos, count);
+	return count;
+}
+
+static struct bin_attribute fw_cfg_sysfs_attr_raw = {
+	.attr = { .name = "raw", .mode = S_IRUSR },
+	.read = fw_cfg_sysfs_read_raw,
+};
+
+/* kobjects representing top-level and by_key folders */
+static struct kobject *fw_cfg_top_ko;
+static struct kobject *fw_cfg_sel_ko;
+
+/* register an individual fw_cfg file */
+static int fw_cfg_register_file(const struct fw_cfg_file *f)
+{
+	int err;
+	struct fw_cfg_sysfs_entry *entry;
+
+	/* allocate new entry */
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry)
+		return -ENOMEM;
+
+	/* set file entry information */
+	memcpy(&entry->f, f, sizeof(struct fw_cfg_file));
+
+	/* register entry under "/sys/firmware/qemu_fw_cfg/by_key/" */
+	err = kobject_init_and_add(&entry->kobj, &fw_cfg_sysfs_entry_ktype,
+				   fw_cfg_sel_ko, "%d", entry->f.select);
+	if (err)
+		goto err_register;
+
+	/* add raw binary content access */
+	err = sysfs_create_bin_file(&entry->kobj, &fw_cfg_sysfs_attr_raw);
+	if (err)
+		goto err_add_raw;
+
+	/* success, add entry to global cache */
+	fw_cfg_sysfs_cache_enlist(entry);
+	return 0;
+
+err_add_raw:
+	kobject_del(&entry->kobj);
+err_register:
+	kfree(entry);
+	return err;
+}
+
+/* iterate over all fw_cfg directory entries, registering each one */
+static int fw_cfg_register_dir_entries(void)
+{
+	int ret = 0;
+	u32 count, i;
+	struct fw_cfg_file *dir;
+	size_t dir_size;
+
+	fw_cfg_read_blob(FW_CFG_FILE_DIR, &count, 0, sizeof(count));
+	count = be32_to_cpu(count);
+	dir_size = count * sizeof(struct fw_cfg_file);
+
+	dir = kmalloc(dir_size, GFP_KERNEL);
+	if (!dir)
+		return -ENOMEM;
+
+	fw_cfg_read_blob(FW_CFG_FILE_DIR, dir, sizeof(count), dir_size);
+
+	for (i = 0; i < count; i++) {
+		dir[i].size = be32_to_cpu(dir[i].size);
+		dir[i].select = be16_to_cpu(dir[i].select);
+		ret = fw_cfg_register_file(&dir[i]);
+		if (ret)
+			break;
+	}
+
+	kfree(dir);
+	return ret;
+}
+
+/* unregister top-level or by_key folder */
+static inline void fw_cfg_kobj_cleanup(struct kobject *kobj)
+{
+	kobject_del(kobj);
+	kobject_put(kobj);
+}
+
+static int fw_cfg_sysfs_probe(struct platform_device *pdev)
+{
+	int err;
+
+	/* NOTE: If we supported multiple fw_cfg devices, we'd first create
+	 * a subdirectory named after e.g. pdev->id, then hang per-device
+	 * by_key subdirectories underneath it. However, only
+	 * one fw_cfg device exist system-wide, so if one was already found
+	 * earlier, we might as well stop here.
+	 */
+	if (fw_cfg_sel_ko)
+		return -EBUSY;
+
+	/* create by_key subdirectory of /sys/firmware/qemu_fw_cfg/ */
+	err = -ENOMEM;
+	fw_cfg_sel_ko = kobject_create_and_add("by_key", fw_cfg_top_ko);
+	if (!fw_cfg_sel_ko)
+		goto err_sel;
+
+	/* initialize fw_cfg device i/o from platform data */
+	err = fw_cfg_do_platform_probe(pdev);
+	if (err)
+		goto err_probe;
+
+	/* get revision number, add matching top-level attribute */
+	fw_cfg_read_blob(FW_CFG_ID, &fw_cfg_rev, 0, sizeof(fw_cfg_rev));
+	fw_cfg_rev = le32_to_cpu(fw_cfg_rev);
+	err = sysfs_create_file(fw_cfg_top_ko, &fw_cfg_rev_attr.attr);
+	if (err)
+		goto err_rev;
+
+	/* process fw_cfg file directory entry, registering each file */
+	err = fw_cfg_register_dir_entries();
+	if (err)
+		goto err_dir;
+
+	/* success */
+	pr_debug("fw_cfg: loaded.\n");
+	return 0;
+
+err_dir:
+	fw_cfg_sysfs_cache_cleanup();
+	sysfs_remove_file(fw_cfg_top_ko, &fw_cfg_rev_attr.attr);
+err_rev:
+	fw_cfg_io_cleanup();
+err_probe:
+	fw_cfg_kobj_cleanup(fw_cfg_sel_ko);
+err_sel:
+	return err;
+}
+
+static int fw_cfg_sysfs_remove(struct platform_device *pdev)
+{
+	pr_debug("fw_cfg: unloading.\n");
+	fw_cfg_sysfs_cache_cleanup();
+	fw_cfg_kobj_cleanup(fw_cfg_sel_ko);
+	fw_cfg_io_cleanup();
+	return 0;
+}
+
+static const struct of_device_id fw_cfg_sysfs_mmio_match[] = {
+	{ .compatible = "qemu,fw-cfg-mmio", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, fw_cfg_sysfs_mmio_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id fw_cfg_sysfs_acpi_match[] = {
+	{ "QEMU0002", },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, fw_cfg_sysfs_acpi_match);
+#endif
+
+static struct platform_driver fw_cfg_sysfs_driver = {
+	.probe = fw_cfg_sysfs_probe,
+	.remove = fw_cfg_sysfs_remove,
+	.driver = {
+		.name = "fw_cfg",
+		.of_match_table = fw_cfg_sysfs_mmio_match,
+		.acpi_match_table = ACPI_PTR(fw_cfg_sysfs_acpi_match),
+	},
+};
+
+#ifdef CONFIG_FW_CFG_SYSFS_CMDLINE
+
+static struct platform_device *fw_cfg_cmdline_dev;
+
+static int fw_cfg_cmdline_set(const char *arg, const struct kernel_param *kp)
+{
+	struct resource res[3] = {};
+	char *str;
+	phys_addr_t base;
+	resource_size_t size, ctrl_off, data_off;
+	int processed, consumed = 0;
+
+	/* only one fw_cfg device can exist system-wide, so if one
+	 * was processed on the command line already, we might as
+	 * well stop here.
+	 */
+	if (fw_cfg_cmdline_dev) {
+		/* avoid leaking previously registered device */
+		platform_device_unregister(fw_cfg_cmdline_dev);
+		return -EINVAL;
+	}
+
+	/* consume "<size>" portion of command line argument */
+	size = memparse(arg, &str);
+
+	/* get "@<base>[:<ctrl_off>:<data_off>]" chunks */
+	processed = sscanf(str, "@%lli%n:%lli:%lli%n",
+			   &base, &consumed,
+			   &ctrl_off, &data_off, &consumed);
+
+	/* sscanf() must process precisely 1 or 3 chunks:
+	 * <base> is mandatory, optionally followed by <ctrl_off>
+	 * and <data_off>;
+	 * there must be no extra characters after the last chunk,
+	 * so str[consumed] must be '\0'.
+	 */
+	if (str[consumed] ||
+	    (processed != 1 && processed != 3))
+		return -EINVAL;
+
+	res[0].start = base;
+	res[0].end = base + size - 1;
+	res[0].flags = !strcmp(kp->name, "mmio") ? IORESOURCE_MEM :
+						   IORESOURCE_IO;
+
+	/* insert register offsets, if provided */
+	if (processed > 1) {
+		res[1].name = "ctrl";
+		res[1].start = ctrl_off;
+		res[1].flags = IORESOURCE_REG;
+		res[2].name = "data";
+		res[2].start = data_off;
+		res[2].flags = IORESOURCE_REG;
+	}
+
+	/* "processed" happens to nicely match the number of resources
+	 * we need to pass in to this platform device.
+	 */
+	fw_cfg_cmdline_dev = platform_device_register_simple("fw_cfg",
+					PLATFORM_DEVID_NONE, res, processed);
+	if (IS_ERR(fw_cfg_cmdline_dev))
+		return PTR_ERR(fw_cfg_cmdline_dev);
+
+	return 0;
+}
+
+static int fw_cfg_cmdline_get(char *buf, const struct kernel_param *kp)
+{
+	/* stay silent if device was not configured via the command
+	 * line, or if the parameter name (ioport/mmio) doesn't match
+	 * the device setting
+	 */
+	if (!fw_cfg_cmdline_dev ||
+	    (!strcmp(kp->name, "mmio") ^
+	     (fw_cfg_cmdline_dev->resource[0].flags == IORESOURCE_MEM)))
+		return 0;
+
+	switch (fw_cfg_cmdline_dev->num_resources) {
+	case 1:
+		return snprintf(buf, PAGE_SIZE, "0x%llx@...llx",
+				resource_size(&fw_cfg_cmdline_dev->resource[0]),
+				fw_cfg_cmdline_dev->resource[0].start);
+	case 3:
+		return snprintf(buf, PAGE_SIZE, "0x%llx@...llx:%llu:%llu",
+				resource_size(&fw_cfg_cmdline_dev->resource[0]),
+				fw_cfg_cmdline_dev->resource[0].start,
+				fw_cfg_cmdline_dev->resource[1].start,
+				fw_cfg_cmdline_dev->resource[2].start);
+	}
+
+	/* Should never get here */
+	WARN(1, "Unexpected number of resources: %d\n",
+		fw_cfg_cmdline_dev->num_resources);
+	return 0;
+}
+
+static const struct kernel_param_ops fw_cfg_cmdline_param_ops = {
+	.set = fw_cfg_cmdline_set,
+	.get = fw_cfg_cmdline_get,
+};
+
+device_param_cb(ioport, &fw_cfg_cmdline_param_ops, NULL, S_IRUSR);
+device_param_cb(mmio, &fw_cfg_cmdline_param_ops, NULL, S_IRUSR);
+
+#endif /* CONFIG_FW_CFG_SYSFS_CMDLINE */
+
+static int __init fw_cfg_sysfs_init(void)
+{
+	/* create /sys/firmware/qemu_fw_cfg/ top level directory */
+	fw_cfg_top_ko = kobject_create_and_add("qemu_fw_cfg", firmware_kobj);
+	if (!fw_cfg_top_ko)
+		return -ENOMEM;
+
+	return platform_driver_register(&fw_cfg_sysfs_driver);
+}
+
+static void __exit fw_cfg_sysfs_exit(void)
+{
+	platform_driver_unregister(&fw_cfg_sysfs_driver);
+
+#ifdef CONFIG_FW_CFG_SYSFS_CMDLINE
+	platform_device_unregister(fw_cfg_cmdline_dev);
+#endif
+
+	/* clean up /sys/firmware/qemu_fw_cfg/ */
+	fw_cfg_kobj_cleanup(fw_cfg_top_ko);
+}
+
+module_init(fw_cfg_sysfs_init);
+module_exit(fw_cfg_sysfs_exit);
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists